References
- S. K. Sitaraman, G. L. Kinzel, T. Altan, 1991, A Knowledge-Based System for Process-Sequence Design in Axisymmetric Sheet-Metal Forming, J. Mat. Proc. Tech., Vol. 25, No. 3, pp. 247-271. https://doi.org/10.1016/0924-0136(91)90111-Q
- B. S. So, D. H. Park, T. J. Ko, 2008, Hybrid Manufacturing Technologies, J. Kor. Soc. Precis. Eng., Vol. 25, No. 9, pp. 7-13.
- Y. J. Ko, H. S. Kwak, J. H. Bae, C. Kim, 2014, Progressive Process Design for Delta Sash in Vehicles, J. Kor. Soc. Precis. Eng., Vol. 31, No. 12, pp. 1161-1170. https://doi.org/10.7736/KSPE.2014.31.12.1161
- D. C. Lee, J. W. Yun, 2017, Study on the Automatic Strip Layout Design of Shield Connector, J. Kor. Academia-Industrial Cooperation Soc., Vol. 18, No. 2, pp. 450-455. https://doi.org/10.5762/KAIS.2017.18.2.450
- S. J. Lim, S. H. Kim, K. K. Choi, 2010, A Study on Development of Small Motor Core Die for High Efficiency Induction Motor, J. Kor. Academia-Industrial Cooperation Soc., Vol. 11, No. 2, pp. 455-460. https://doi.org/10.5762/KAIS.2010.11.2.455
- K. H. Ahn, D. H. Yoo, M. H. Seo, S. H. Park, K. S. Chung, 2009, Spring-Back Prediction of TWIP Automotive Sheets, Met. Mater. Int., Vol. 15, No. 4, pp. 637-647. https://doi.org/10.1007/s12540-009-0637-z
- D. H. Kim, D. H. Yoon, S. S. Seol, D. W. Jung, 2016, Study on Spring-Back Effect according to Roll Gap and Forming Velocity of Roll Forming Process, J. Kor. Soc. Precis. Eng., Vol. 33, No. 6, pp. 477-483. https://doi.org/10.7736/KSPE.2016.33.6.477
- S. H. Kwon, H. S. Lee, Y. S. Lee, S. W. Kim, C. Y. Jung, S. Hong, 2016, Compensation Design to Reduce Springback in Sheet Metal Forming of 1.2GPa Ultra High Strength Steel, Trans. Mater. Process., Vol. 25, No. 5, pp. 301-305. https://doi.org/10.5228/KSTP.2016.25.5.301
- B. G. Kim, I. S. Lee, Y. T. Keum, 2009, Study on the Springback Reduction of Automotive Advanced High Strength Steel Panel, Trans. Mater. Process., Vol. 18, No. 6, pp. 488-493. https://doi.org/10.5228/KSPP.2009.18.6.488
- D. H. Park, H. H. Kwon, 2016, Development of Automotive Seat Rail Parts for Improving Shape Fixability of Ultra High Strength Steel of 980MPa, J. Kor. Soc. Manuf. Technol. Eng., Vol. 15, No. 5, pp. 137-144.
- H. J. Shin, 2006, Development of Hierarchical Production Planning and Control System for Mixed-Model Assembly Manufacture - An Application in Refrigerator Factory, IE Interfaces, Vol. 19, No. 1, pp. 34-42.
- D. H. Park, J. J. Gu, 2014, Experimental Study of New Welding Assembly Technology Applied with Mixed-Model Production Method, J. Kor. Soc. Manuf. Technol. Eng., Vol. 23, No. 6, pp. 602-608. https://doi.org/10.7735/ksmte.2014.23.6.602