Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

3-D Coupled Analysis of Deformation of the Strip and Rolls in Flat Rolling by FEM- Part II: Application

유한요소법을 활용한 평판압연에서의 롤 판 연계 해석 - Part II: 적용

  • Received : 2017.06.08
  • Accepted : 2017.07.17
  • Published : 2017.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

A general approach is proposed for 3-D coupled FE analysis of the deformation of the strip and rolls in flat rolling. FE formulation, schemes for the treatment of contact occurring in a cluster of deforming objects, and the solution strategy are described in detail. The validity of the approach is examined through comparison with observed measurements. The approach is applied to the analysis of deformation in a four-high and six-high mill.

Keywords

References

  1. G. J. Li, S. Kobayashi, 1982, Rigid-plastic Finite-Element Analysis of Plane Strain Rolling, ASME Trans., J. Engr. Ind.,Vol.104, p. 55. https://doi.org/10.1115/1.3185797
  2. R. M. Guo, 1997, Prediction of Strip Profile in Rolling Process using Influence Coefficients and Boussinesq's Equation, J. Manuf. Sci. Eng., Vol.119, pp. 220-226. https://doi.org/10.1115/1.2831098
  3. A. Hacquin, P. Montmitonnet, J. P. Guillerault, 1998, A A 3D Semi-analytical Model of Rolling Stand Deformation with Finite Element Validation, Eur. J. Mech. A: Solids, Vol.17, No. 1, pp. 79-106.
  4. H. Ford, 1948, Researches into the Deformation of Metals by Cold Rolling, Proc. Inst. Mech. Eng., Vol. 159, pp. 115-143. https://doi.org/10.1243/PIME_PROC_1948_159_014_02
  5. T. H. Kim, W. H. Lee, S. M. Hwang., 2003, An Integrated FE Process Model for the Prediction of Strip Profile in Flat Rolling, ISIJ international., Vol. 43, No.12, pp. 1947-1956. https://doi.org/10.2355/isijinternational.43.1947