DOI QR코드

DOI QR Code

Bayesian-based seismic margin assessment approach: Application to research reactor

  • Kwag, Shinyoung (Research Reactor Mechanical Structure Division, Korea Atomic Energy Research Institute) ;
  • Oh, Jinho (Research Reactor Mechanical Structure Division, Korea Atomic Energy Research Institute) ;
  • Lee, Jong-Min (Research Reactor Mechanical Structure Division, Korea Atomic Energy Research Institute) ;
  • Ryu, Jeong-Soo (Research Reactor Mechanical Structure Division, Korea Atomic Energy Research Institute)
  • 투고 : 2017.01.10
  • 심사 : 2017.06.19
  • 발행 : 2017.06.25

초록

A seismic margin assessment evaluates how much margin exists for the system under beyond design basis earthquake events. Specifically, the seismic margin for the entire system is evaluated by utilizing a systems analysis based on the sub-system and component seismic fragility data. Each seismic fragility curve is obtained by using empirical, experimental, and/or numerical simulation data. The systems analysis is generally performed by employing a fault tree analysis. However, the current practice has clear limitations in that it cannot deal with the uncertainties of basic components and accommodate the newly observed data. Therefore, in this paper, we present a Bayesian-based seismic margin assessment that is conducted using seismic fragility data and fault tree analysis including Bayesian inference. This proposed approach is first applied to the pooltype nuclear research reactor system for the quantitative evaluation of the seismic margin. The results show that the applied approach can allow updating by considering the newly available data/information at any level of the fault tree, and can identify critical scenarios modified due to new information. Also, given the seismic hazard information, this approach is further extended to the real-time risk evaluation. Thus, the proposed approach can finally be expected to solve the fundamental restrictions of the current method.

키워드

과제정보

연구 과제 주관 기관 : Ministry of Science, and ICT of Korea

참고문헌

  1. ASCE (2016), Seismic analysis of safety-related nuclear structures and commentary, ASCE/SEI 4-16, American Society of Civil Engineers.
  2. ASME/ANS (2009), Addenda to ASME/ANS RA-S-2008-Standard for Level 1/Large Early Release Frequency Probabilistic Risk Assessment for Nuclear Power Plant Applications, ASME/ANS RA-Sa-2009, American Society of Mechanical Engineers.
  3. Atkinson, G.M., Bommer, J.J. and Abrahamson, N.A. (2014), "Alternative approaches to modeling epistemic uncertainty in ground motions in probabilistic seismic-hazard analysis", Seismol. Res. Lett., 85(6), 1141-1144. https://doi.org/10.1785/0220140120
  4. Baker, J.W. (2008), An introduction to probabilistic seismic hazard analysis, Report for the US Nuclear Regulatory Commission, page Version, 1.
  5. Balasubramanian, S.R., Balaji, R.K., Meher, P.A., Rupen, G. and Anoop, M.B. (2014), "A methodology for development of seismic fragility curves for URBM buildings", Earthquakes and Structures, 6(6), 611-625. https://doi.org/10.12989/eas.2014.6.6.611
  6. Brynda, W.J., Lobner, P.R., Powell, R.W. and Straker, E.A. (1978), Design Guide for Category-III Reactors Pool Type Reactor, BNL 50831-III, Brookhaven National Laboratory Associated Universities Inc., Upton, New York.
  7. Budnitz, R.J., Amico, P.J., Hall, W.J. and Kennedy, P.R. (1985), An Approach to the Quantification of Seismic Margins in Nuclear Power Plants, Lawrence Livermore National Laboratory Report UCID-20444, NUREG/CR-4334, Prepared for the US Nuclear Regulatory Commission.
  8. Chen, L. and Chen, S. (2016), "Seismic fragility performance of skewed and curved bridges in low-to-moderate seismic region", Earthq. Struct., 10(4), 789-810. https://doi.org/10.12989/eas.2016.10.4.789
  9. Cornell, C.A., Jalayer, F., Hamburger, R.O. and Foutch, D.A. (2002), "Probabilistic basis for 2000 SAC federal emergency management agency steel moment frame guidelines", J. Struct. Eng., ASCE, 128(4), 526-33. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:4(526)
  10. Ellingwood, B. (1990), "Validation studies of seismic PRAs", Nuclear Eng. Des., 123(2-3), 189-196. https://doi.org/10.1016/0029-5493(90)90237-R
  11. Ellingwood, B. (1994), Validation of Seismic Probabilistic Risk Assessments of Nuclear Power Plants, NUREG/GR-0008, Prepared for the US Nuclear Regulatory Commission.
  12. EPRI (1991), A Methodology for Assessment of Nuclear Power Plant Seismic Margin, NP-6041-SLR1, Electric Power Research Institute.
  13. EPRI (1994), Methodology for Developing Seismic Fragilities, TR-103959, Electric Power Research Institute.
  14. Fullwood, R.R. (2000), Probabilistic Safety Assessment in the Chemical and Nuclear Industries, Butterworth-Heinemann.
  15. Fussell, J. (1975), "How to hand calculate system reliability and safety characteristics", IEEE Trans. Reliability, 24(3), 169-174.
  16. Gardoni, P., Der Kiureghian, A. and Mosalam, K.M. (2002), "Probabilistic capacity models and fragility estimates for reinforced concrete columns based on experimental observations", J. Struct. Eng., ASCE, 128(10), 1024-1038.
  17. Giorgio, M. and Iervolino, I. (2016), "On multisite probabilistic seismic hazard analysis", Bull. Seismol. Soc. Am., 106(3), 1223-1234. https://doi.org/10.1785/0120150369
  18. Hakata, T. (2007), "Seismic PSA method for multiple nuclear power plants in a site", Reliability Eng. Syst. Safe., 92(7), 883-894. https://doi.org/10.1016/j.ress.2006.04.022
  19. Hamada, M., Martz, H.F., Reese, C.S., Graves, T., Johnson, V. and Wilson, A.G. (2004), "A fully Bayesian approach for combining multilevel failure information in fault tree quantification and optimal follow-on resource allocation", Reliability Eng. Syst. Safe., 86(3), 297-305. https://doi.org/10.1016/j.ress.2004.02.001
  20. IAEA (1992), Procedures for Conducting Probabilistic Safety Assessments of Nuclear Power Plants (Level 1), Safety Series No. 50-P-4, International Atomic Energy Agency.
  21. IAEA (2001), Utilization related Design Features of Research Reactors: A Compendium, Technical Report Series, No.455, International Atomic Energy Agency.
  22. Ju, B.S., Jung, W.Y. and Ryu, Y.H. (2013), "Seismic fragility evaluation of piping system installed in critical structures", Struct. Eng. Mech., 46(3), 337-352. https://doi.org/10.12989/sem.2013.46.3.337
  23. Jung, W.Y. and Ju, B.S. (2015), "Effect of MDOF structures' optimal dampers on seismic fragility of piping", Earthq. Struct., 9(3), 563-576. https://doi.org/10.12989/eas.2015.9.3.563
  24. Kelly, D.L. and Smith, C.L. (2009), "Bayesian inference in probabilistic risk assessment-The current state of the art", Reliability Eng. Syst. Safe., 94(2), 628-643. https://doi.org/10.1016/j.ress.2008.07.002
  25. Kim, J.H., Choi, I.K. and Park, J.H. (2011), "Uncertainty analysis of system fragility for seismic safety evaluation of NPP", Nuclear Eng. Des., 241(7), 2570-2579. https://doi.org/10.1016/j.nucengdes.2011.04.031
  26. Koutsourelakis, P.S. (2010), "Assessing structural vulnerability against earthquakes using multi-dimensional fragility surfaces A Bayesian framework", Prob. Eng. Mech., 25(1), 49-60. https://doi.org/10.1016/j.probengmech.2009.05.005
  27. Kwag, S. (2016), "Probabilistic approaches for multi-hazard risk assessment of structures and systems", Ph.D. Dissertation, North Carolina State University, Raleigh, NC, US.
  28. Kwag, S. and Gupta, A. (2016), "Bayesian network technique in probabilistic risk assessment for multiple hazards", Proceedings of 24th International Conference on Nuclear Engineering (ICONE 24), June 26-30, 2016, Charlotte, NC, US.
  29. Kwag, S. and Gupta, A. (2017), "Probabilistic risk assessment framework for structural systems under multiple hazards using Bayesian statistics", Nuclear Eng. Des., 315, 20-34. https://doi.org/10.1016/j.nucengdes.2017.02.009
  30. Kwag, S. and Ok, S.Y. (2013), "Robust design of seismic isolation system using constrained multi-objective optimization technique", KSCE J. Civ. Eng., 17(5), 1051-1063. https://doi.org/10.1007/s12205-013-0334-9
  31. Kwag, S., Lee, J.M., Ryu, J.S. and Kim, Y. K. (2012), "Structural integrity evaluation of reactor pool working platform: guide tubes and refuelling cover in a research reactor", The Eleventh International Conference on Computational Structures Technology (11th CST), 4-7 September, Dubrovnik, Croatia.
  32. Kwag, S., Lee, J.M., Oh, J. and Ryu, J.S. (2014), "Development of system design and seismic performance evaluation for reactor pool working platform of a research reactor", Nuclear Eng. Des., 266, 199-213. https://doi.org/10.1016/j.nucengdes.2013.10.025
  33. Kwag, S., Lee, J.M., Oh, J., Ryu, J.S. and Kim, Y.K. (2011), "Structural integrity evaluation of a service pool working platform in research reactor," Transactions of the Korean Nuclear Society Autumn Meeting, October 27-28, Gyeongju, Korea.
  34. Lee, Y.J. and Moon, D.S. (2014), "A new methodology of the development of seismic fragility curves", Smart Struct. Syst., 14(5), 847-867. https://doi.org/10.12989/sss.2014.14.5.847
  35. Mahmoudi, M., Shayanfar, M., Barkhordari, M.A. and Jahani, E. (2016), "New fuzzy method in choosing Ground Motion Prediction Equation (GMPE) in probabilistic seismic hazard analysis," Earthq. Struct., 10(2), 389-408. https://doi.org/10.12989/eas.2016.10.2.389
  36. McGuire, R.K. (1995), "Probabilistic seismic hazard analysis and design earthquakes: closing the loop", Bull. Seismol. Soc. Am., 85(5), 1275-1284.
  37. Modarres, M., Kaminskiy, M.P. and Krivtsov, V. (1999), Reliability Engineering and Risk Analysis: a Practical Guide. CRC press.
  38. Mosleh, A., Razzaghi, M.S., Jara, J. and Varum, H. (2016), "Development of fragility curves for RC bridges subjected to reverse and strike-slip seismic sources," Earthq. Struct., 11(3), 517-538. https://doi.org/10.12989/eas.2016.11.3.517
  39. Mulargia, F., Stark, P.B. and Geller, R.J. (2016), "Why is Probabilistic Seismic Hazard Analysis (PSHA) Still Used?", Physics of the Earth and Planetary Interiors, In Press.
  40. Petersen, M.D., Frankel, A.D., Harmsen, S.C., Mueller, C.S., Haller, K.M., Wheeler, R.L. and Luco, N. (2008), Documentation for the 2008 Update of the United States National Seismic Hazard Maps, U.S. Geological Survey Open-File Report 2008-1128, 61.
  41. Plummer, M. (2003), "JAGS: A program for analysis of Bayesian graphical models using Gibbs sampling", Proceedings of the 3rd international workshop on distributed statistical computing, 124, Technische Universit at Wien.
  42. Rasmussen, N.C. (1975), Reactor Safety Study, WASH-1400, NUREG-75/014, Appendix II, US Nuclear Regulatory Commission, Washington DC.
  43. Shinozuka, M., Feng, M.Q., Lee, J. and Naganuma, T. (2000), "Statistical analysis of fragility curves", J. Eng. Mech., ASCE, 126(12), 1224-1231. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:12(1224)
  44. Singer, D. (1990), "A Fuzzy set approach to fault tree and reliability analysis", Fuzz. Set. Syst., 34(2), 145-155. https://doi.org/10.1016/0165-0114(90)90154-X
  45. Straub, D. and Der Kiureghian, A. (2008), "Improved seismic fragility modeling from empirical data", Struct. Safe., 30(4), 320-336. https://doi.org/10.1016/j.strusafe.2007.05.004
  46. Tanaka, H., Fan, L.T., Lai, F.S. and Toguchi, K. (1983), "Fault-tree analysis by Fuzzy probability", IEEE Trans. Reliab., 32(5), 453-457.
  47. USNRC (1975), Reactor Safety Study, WASH-1400, NUREG 73/041, US Nuclear Regulatory Commission.
  48. USNRC (1983), PRA Procedure Guide-A Guide to the performance of probabilistic risk assessments for nuclear power plants, NUREG/CR-2300, US Nuclear Regulatory Commission.
  49. Vermaut, M., Monette, P., Shah, P. and Campbell, R.D. (1998), "Methodology and results of the seismic probabilistic safety assessment of Krsko nuclear power plant", Nuclear Eng. Des., 182(1), 59-72. https://doi.org/10.1016/S0029-5493(97)00274-4
  50. Yu, F.L., Chen, P.C., Lin, E. and Wu, J.S. (1989), "Seismic probabilistic risk assessment and its application to utility safety decisions", Reliability Eng. Syst. Safe., 24(2), 199-221. https://doi.org/10.1016/0951-8320(89)90092-6

피인용 문헌

  1. Beneficial and Detrimental Effects of Soil-Structure Interaction on Probabilistic Seismic Hazard and Risk of Nuclear Power Plant vol.2018, pp.None, 2017, https://doi.org/10.1155/2018/2698319
  2. Bayesian demand model based seismic vulnerability assessment of a concrete girder bridge vol.9, pp.4, 2017, https://doi.org/10.12989/acc.2020.9.4.337
  3. 지진 확률론적 리스크 평가를 위한 샘플링기반 접근법 vol.33, pp.2, 2020, https://doi.org/10.7734/coseik.2020.33.2.129