Structural Engineering and Mechanics

  • 제63권2호
  • /
  • Pages.207-215
  • /
  • 2017
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Numerical and theoretical modelling of low velocity impact on UHPC panels

  • Prem, Prabhat R. (CSIR-Structural Engineering Research Centre) ;
  • Verma, Mohit (CSIR-Structural Engineering Research Centre) ;
  • Ramachandra Murthy, A. (CSIR-Structural Engineering Research Centre) ;
  • Rajasankar, J. (CSIR-Structural Engineering Research Centre) ;
  • Bharatkumar, B.H. (CSIR-Structural Engineering Research Centre)
  • 투고 : 2016.08.05
  • 심사 : 2017.03.10
  • 발행 : 2017.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

The paper presents the studies carried out on low velocity impact of Ultra high performance concrete (UHPC) panels of size $350{\times}350{\times}10mm^3$ and $350{\times}350{\times}15mm^3$. The panels are cast with 2 and 2.5% micro steel fibre and compared with UHPC without fiber. The panels are subjected to low velocity impact, by a drop-weight hemispherical impactor, at three different energy levels of 10, 15 and 20 J. The impact force obtained from the experiments are compared with numerically obtained results using finite element method, theoretically by energy balance approach and empirically by nonlinear multi-genetic programming. The predictions by these models are found to be in good coherence with the experimental results.

키워드

참고문헌

  1. Abrate, S. (1991), "Impact on laminated composite materials", Appl. Mech. Rev., 44(4), 155-90. https://doi.org/10.1115/1.3119500
  2. Ambily, P., Umarani, C., Ravisankar, K., Prem, P.R., Bharatkumar, B. and Iyer, N.R. (2015), "Studies on ultra high performance concrete incorporating copper slag as fine aggregate", Constr. Build. Mater., 77, 233-240. https://doi.org/10.1016/j.conbuildmat.2014.12.092
  3. Bazant, Z.P. and Planas, J. (1997), Fracture and Size Effect in Concrete and Other Quasi Brittle Materials, Volume 16, CRC Press.
  4. Bharatkumar, B., Shah, S., Weiss, J., Kovler, K., Marchand, J. and Mindess, S. (2004), "Impact resistance of hybrid fiber reinforced mortar", International RILEM Symposium on Concrete Science and Engineering: A Tribute to Arnon Bentur, RILEM Publications SARL.
  5. Bindiganavile, V. and Banthia, N. (2001), "Polymer and steel fiber-reinforced cementitious composites under impact loading? Part 2: flexural toughness", ACI Mater. J., 98(1), 17-24.
  6. Chen, L. and Graybeal, B.A. (2012), "Modeling structural performance of ultrahigh performance concrete I-girders", J. Bridge Eng., 17(5), 754-764. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000305
  7. Chuzel-Marmot, Y., Ortiz, R. and Combescure, A. (2011), "Three dimensional SPH-FEM gluing for simulation of fast impacts on concrete slabs", Comput. Struct., 89(23), 2484-2494. https://doi.org/10.1016/j.compstruc.2011.06.002
  8. Farnam, Y., Mohammadi, S. and Shekarchi, M. (2010), "Experimental and numerical investigations of low velocity impact behavior of high-performance fiber-reinforced cement based composite'', Int. J. Impact Eng., 37(2), 220-229. https://doi.org/10.1016/j.ijimpeng.2009.08.006
  9. Gandomi, A.H. and Alavi, A.H. (2012), "A new multi-gene genetic programming approach to nonlinear system modeling. Part I: materials and structural engineering problems", Neur. Comput. Appl., 21(1), 171-187. https://doi.org/10.1007/s00521-011-0734-z
  10. Habel, K. and Gauvreau, P. (2008), "Response of ultra-high performance fiber reinforced concrete (UHPFRC) to impact and static loading", Cement Concrete Compos., 30(10), 938-946. https://doi.org/10.1016/j.cemconcomp.2008.09.001
  11. Jankowiak, T. and Lodygowski, T. (2005), "Identification of parameters of concrete damage plasticity constitutive model", Found. Civil Environ. Eng., 6(1), 53-69.
  12. Maca, P., Sovjak, R. and Konvalinka, P. (2014), "Mix design of UHPFRC and its response to projectile impact", Int.l J. Impact Eng., 63, 158-163. https://doi.org/10.1016/j.ijimpeng.2013.08.003
  13. Maca, P., Sovjak, R. and Vavrinik, T. (2013), "Experimental investigation of mechanical properties of UHPFRC", Procedia Eng., 65, 14-19. https://doi.org/10.1016/j.proeng.2013.09.004
  14. Mechtcherine, V., Millon, O., Butler, M. and Thoma, K. (2011), "Mechanical behaviour of strain hardening cement-based composites under impact loading", Cement Concrete Compos., 33(1), 1-11. https://doi.org/10.1016/j.cemconcomp.2010.09.018
  15. Murthy, A.R., Karihaloo, B.L., Iyer, N.R. and Prasad, B.R. (2013), "Determination of size independent specific fracture energy of concrete mixes by two methods", Cement Concrete Res., 50, 19-25. https://doi.org/10.1016/j.cemconres.2013.03.015
  16. Murthy, A.R., Kumar, V.R., Gopinath, S., Prem, P.R., Iyer, N.R. and Balakrishnan, R. (2014), "Structural performance of precast and cast-in-situ ultra high strength concrete sandwich panel", Int. J. Comput. Mater. Continua, 44(1), 59-72.
  17. Naaman, A., Toledo Filho, R., Silva, F., Koenders, E. and Fairbairn, E. (2011), "Half a century of progress leading to ultra-high performance fiber reinforced concrete: part 1 overall review", Proceedings of the 2nd International RILEM Conference, 17-26.
  18. Prem, P.R. and Murthy, A.R. (2016), "Acoustic emission and flexural behaviour of RC beams strengthened with UHPC overlay", Constr. Build. Mater., 123, 481-492. https://doi.org/10.1016/j.conbuildmat.2016.07.033
  19. Prem, P.R., Bharathkumar, B. and Nagesh, R.I. (2012), "Mechanical properties of ultra high performance concrete", World Acad. Sci. Eng. Technol., 68, 1969-1978.
  20. Prem, P.R., Bharatkumar, B. and Iyer, N.R. (2013), "Influence of curing regimes on compressive strength of ultra high performance concrete", Sadhana, 38(6), 1421-1431. https://doi.org/10.1007/s12046-013-0159-8
  21. Prem, P.R., Murthy, A.R. and Bharatkumar, B.H. (2015a), "Influence of curing regime and steel fibres on the mechanical properties of UHPC", Mag. Concrete Res., 67(18), 988-1002. https://doi.org/10.1680/macr.14.00333
  22. Prem, P.R., Murthy, A.R., Ramesh, G., Bharatkumar, B. and Iyer, N.R. (2015b), "Flexural behaviour of damaged RC beams strengthened with ultra high performance concrete", Adv. Struct. Eng., 2057-2069.
  23. Rokugo, K., Kanda, T., Yokota, H. and Sakata, N. (2009), "Applications and recommendations of high performance fiber reinforced cement composites with multiple fine cracking (HPFRCC) in Japan", Mater. Struct., 42(9), 1197-1208. https://doi.org/10.1617/s11527-009-9541-8
  24. Schmidt, M. (2012), "Sustainable building with ultra-highperformance concrete (UHPC) coordinated research program in Germany", Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Kassel University Press, Kassel.
  25. Schmidt, M. and Fehling, E. (2005), "Ultra-high-performance concrete: research, development and application in Europe", ACI Special Publication, 228, 51-78.
  26. Searson, D.P. (2014), "GPTIPS 2: an open-source software platform for symbolic data mining", arXiv preprint arXiv:1412.4690.
  27. Searson, D.P., Leahy, D.E. and Willis, M.J. (2010), "GPTIPS: an open source genetic programming toolbox for multigene symbolic regression", Proceedings of the International Multi Conference of Engineers and Computer Scientists, Volume 1, Citeseer.
  28. Shivakumar, K., Elber, W. and Illg, W. (1983), "Prediction of impact force and duration during low velocity impact on circular composite laminates", J. Appl. Mech., 52(3), 674-680. https://doi.org/10.1115/1.3169120
  29. Sohel, K.M.A., Richard, L., Alwis, W.A.M. and Paramasivam, P. (2003), "Experimental investigation of low-velocity impact characteristics of steel-concrete-steel sandwich beams", Steel Compos. Struct., 3(4), 289-306. https://doi.org/10.12989/scs.2003.3.4.289
  30. Sovjak, R., Vavrin k, T., Zatloukal, J., Maca, P., Micunek, T. and Frydryn, M. (2015), "Resistance of slim UHPFRC targets to projectile impact using in-service bullets", Int. J. Impact Eng., 76, 166-177. https://doi.org/10.1016/j.ijimpeng.2014.10.002
  31. Tai, Y.S. andWang, I.T. (2011), "Elucidating the mechanical behavior of ultra-high-strength concrete under repeated impact loading", Struct. Eng. Mech., 37(1), 1-15. https://doi.org/10.12989/sem.2011.37.1.001
  32. Thiyahuddin, I., Gu, Y., Thambiratnam, D. and Gudimetla, P. (2012), "Impact & energy absorption of road safety barriers by coupled SPH/FEM", Int. J. Protect. Struct., 3(3), 257-273. https://doi.org/10.1260/2041-4196.3.3.257
  33. Verma, M., Prem, P.R., Rajasankar, J. and Bharatkumar, B. (2016), "On low-energy impact response of ultra-high performance concrete (UHPC) panels", Mater. Des., 92, 853-865. https://doi.org/10.1016/j.matdes.2015.12.065
  34. Wille, K., Naaman, A.E. and Parra-Montesinos, G.J. (2011), "Ultra-high performance concrete with compressive strength exceeding 150 MPa (22 ksi): A simpler way", ACI Mater. J., 108(1), 34-46.
  35. Xu, J., Wu, C., Xiang, H., Su, Y., Li, Z.X., Fang, Q., Hao, H., Liu, Z., Zhang, Y. and Li, J. (2016), "Behaviour of ultra high performance fibre reinforced concrete columns subjected to blast loading", Eng. Struct., 118, 97-107. https://doi.org/10.1016/j.engstruct.2016.03.048
  36. Yoo, D.Y., Banthia, N., Kim, S.W. and Yoon, Y.S. (2015), "Response of ultra-high-performance fiber reinforced concrete beams with continuous steel reinforcement subjected to lowvelocity impact loading", Compos. Struct., 126, 233-245. https://doi.org/10.1016/j.compstruct.2015.02.058
  37. Yu, R., Spiesz, P. and Brouwers, H. (2014), "Static properties and impact resistance of a green Ultra-High Performance Hybrid Fibre Reinforced Concrete (UHPHFRC): experiments and modelling", Constr. Build. Mater., 68, 158-171. https://doi.org/10.1016/j.conbuildmat.2014.06.033
  38. Zhang, X., Ruiz, G. and Yu, R.C. (2010), "A new drop-weight impact machine for studying fracture processes in structural concrete", Strain, 46(3), 252-257. https://doi.org/10.1111/j.1475-1305.2008.00574.x