KSCE Journal of Civil and Environmental Engineering Research (대한토목학회논문집)

Korean Society of Civil Engeneers (대한토목학회)
권호 표지
DOI QR코드

DOI QR Code

A Computer Graphics Program for 2-Dimensional Strut-tie Model Design of Concrete Members

콘크리트 구조부재의 2차원 스트럿-타이 모델 설계를 위한 컴퓨터 그래픽 프로그램

  • 윤영묵 (경북대학교 토목공학과)
  • Received : 2014.06.03
  • Accepted : 2017.01.16
  • Published : 2017.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

The strut-tie model approach has been recognized as an efficient methodology for the design of all types of concrete members with D-regions, and the approach has been accepted in design codes globally. However, the design of concrete members with the approach requires many iterative numerical structural analyses, numerous graphical calculations, enormous times and efforts, and designer's subjective decisions in terms of the development of appropriate strut-tie model, determination of required areas of struts and ties, and verification of strength conditions of struts and nodal zones. In this study, a computer graphics program, that enables the design of concrete members efficiently and professionally by overcoming the forementioned limitations of the strut-tie model approach, is developed. In the computer graphics program, the numerical programs that are essential in the strut-tie model analysis and design of concrete members including finite element analysis programs for the plane truss and solid problems with all kinds of boundary conditions, a program for automatic determination of effective strengths of struts and nodal zones, and a program for graphical verification of developed strut-tie model's appropriateness by displaying various geometrical shapes of struts and nodal zones, are loaded. Great efficiency and convenience during the application of the strut-tie model approach may be provided by the various graphics environment-based functions of the proposed program.

스트럿-타이 모델 방법은 응력교란영역을 갖는 콘크리트 구조부재의 설계에 효과적인 방법으로 알려져 있으며, 세계 주요 설계기준서에 채택되고 있다. 그러나 스트럿-타이 모델 방법에 의한 콘크리트 구조부재의 설계과정은 스트럿-타이 모델의 형성, 스트럿 및 타이의 필요단면적의 결정, 스트럿 및 절점영역의 강도검토 등으로 인한 반복적인 수치해석과정, 많은 도식적 계산과정, 엄청난 시간과 노력, 그리고 여러 단계에서의 설계자의 주관적인 판단 등을 필요로 하는 단점을 내포하고 있다. 이 연구에서는 스트럿-타이 모델 설계과정 상의 단점을 극복하여 모든 콘크리트 구조부재의 스트럿-타이 모델 해석 및 설계를 전문적이며 효과적으로 수행할 수 있는 컴퓨터 그래픽 프로그램을 개발하였다. 이 연구의 컴퓨터 그래픽 프로그램은 평면고체 및 평면트러스의 선형 및 재료비선형 해석을 위한 모든 종류의 경계조건을 소화할 수 있는 유한요소해석 프로그램, 스트럿 및 절점영역 유효강도의 자동적 결정을 위한 수치해석 프로그램, 다양한 형태의 스트럿 및 절점영역의 형상 결정을 위한 그래픽 프로그램 등을 포함한 콘크리트 구조부재의 스트럿-타이 모델 해석 또는 설계과정 상에 필요한 모든 프로그램을 탑재하고 있다. 이 연구의 프로그램은 그래픽 환경을 접목시킨 여러 다양한 기능을 통해 콘크리트 구조부재의 모델링 및 스트럿-타이 모델 해석 및 설계 시 뛰어난 효율성과 편의성을 제공할 것이다.

Keywords

References

  1. ACI-ASCE Committee 445 (2010). Further examples for the design of structural concrete with strut-and-tie models; SP-273, American Concrete Institute, Farmington Hills, Michigan.
  2. American Association of State Highway and Transportation Officials (2010). AASHTO LRFD bridge design specifications, 5th Edition, Washington D. C.
  3. Alshegeir, A. and Ramirez, J. A. (1992). "Computer graphics in detailing strut-tie models." Journal of Computing in Civil Engineering, ASCE, Vol. 6, pp. 220-232. https://doi.org/10.1061/(ASCE)0887-3801(1992)6:2(220)
  4. Bouadi, A. (1989). Behavior of CCT nodes in structural concrete strutand-tie models, MS Thesis, University of Texas at Austin, Texas.
  5. Jeon, C. H. and Yun, Y. M. (2010). "Validity evaluation of effective strength of concrete strut using strut-tie model analysis of structural concrete" Journal of the Korean Society of Civil Engineers, KSCE, Vol. 30, pp. 443-462 (in Korean).
  6. KCI Shear-Torsion Committee (2012). Examples for strut-tie model design of structural concrete, 2nd Edition, Kimoon-Dang, Seoul (in Korean).
  7. Mish, K., Nobari, F. and Liu, D. (1995). "An interactive graphical strut-and-tie application." Proceedings of the Second Congress on Computing in Civil Engineering, J. P. Mohsen, ed., American Society of Civil Engineers, New York, pp. 788-795.
  8. Schlaich, J., Schaefer, K. and Jennewein, M. (1984). "Towards a consistent design of structural concrete." Journal of the Prestressed Concrete Institute, Vol. 32, pp. 74-150.
  9. Tech Soft (1997). HOOPS graphics system, Berkely, California.
  10. Tjhin, T. N. and Kuchma, D. A. (2002). "Computer-based tools for design by strut-and-tie method: Advances and challenges." ACI Structural Journal, Vol. 99, pp. 586-594.
  11. Yun, Y. M. (2000). "Nonlinear strut-tie model approach for structural concrete." ACI Structural Journal, Vol. 97, pp. 581-590.
  12. Yun, Y. M. (2000). "Computer graphics for nonlinear strut-tie model approach." Journal of Computing in Civil Engineering, ASCE, Vol. 14, pp. 127-133. https://doi.org/10.1061/(ASCE)0887-3801(2000)14:2(127)
  13. Yun, Y. M. (2002). "Nonlinear strut-tie model analysis of reinforced concrete beams." Journal of the Korean Society of Civil Engineers, KSCE, Vol. 22, pp. 1153-1163 (in Korean).
  14. Yun, Y. M. (2003). "Evaluation of dapped beam design methods using strut-tie model analysis." Journal of the Korean Society of Civil Engineers, KSCE, Vol. 23, pp. 585-597 (in Korean).
  15. Yun, Y. M. (2005). "Effective strength of concrete strut in strut-tie model (I) - methods for determining effective strength of concrete strut." Journal of the Korean Society of Civil Engineers, KSCE, Vol. 25, pp. 49-59 (in Korean).
  16. Yun, Y. M. (2005). "Strut-tie model evaluation of behavior and strength of pre-tensioned concrete deep beams." Computers and Concrete, Vol. 2, pp. 267-291. https://doi.org/10.12989/cac.2005.2.4.267
  17. Yun, Y. M. (2005). "Evaluation of ultimate strength of post-tensioned anchorage zones." Journal of Advanced Concrete Technology, Vol. 3, pp. 149-159. https://doi.org/10.3151/jact.3.149
  18. Yun, Y. M. (2006). "Strength of two-dimensional nodal zones in strut-tie models." Journal of Structural Engineering, ASCE, Vol. 132, pp. 1764-1783. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:11(1764)
  19. Yun, Y. M., Lee, W. S., Kim, B. H. and Jeong, C. H. (2007). "Prediction of shear strength for reinforced concrete corbels using shear-friction and strut-tic models." Journal of the Korean Society of Civil Engineers, KSCE, Vol. 27, pp. 141-155 (in Korean).
  20. Yun, Y. M. and Park, M. H. (1995). "Development of interactive computer graphics program for strut-tie models." Journal of Civil Engineering, KSCE, Vol. 15, pp. 1113-1126 (in Korean).