DOI QR코드

DOI QR Code

Static test on failure process of tubular T-joints with initial fatigue crack

  • Wang, Yamin (School of Mechatronic Engineering, Southwest Petroleum University) ;
  • Shao, Yongbo (School of Mechatronic Engineering, Southwest Petroleum University) ;
  • Song, Shengzhi (R&D centre of Jungian Construction safety and disaster mitigation, Jiangsu Jianzhu Institute) ;
  • Yang, Dongping (Technology Inspection Center, China Petroleum & Chemical Corporation)
  • 투고 : 2016.12.24
  • 심사 : 2017.05.17
  • 발행 : 2017.08.10

초록

Fatigue crack initiated in welded tubular joints due to cyclic loading may produce harmful effect on the integrity of the tubular structures. To study such effect, both fatigue and static tests on nine circular tubular T-joint specimens made of carbon steel materials were carried out. The specimens were subjected to tensile loading in both fatigue and static tests. The load-displacement relation, the crack propagation and the failure mode of the specimens are all analyzed. The deterioration of the static strength of the cracked T-joints is also investigated and evaluated through an area reduction factor. Experimental results indicate that the static strength of a tubular T-joint with a surface crack seems to decrease slightly while a through crack has relatively remarkable effect on the reduction of the static strength. Additionally, experimental results also show that the toughness of the materials and the geometry of the specimens play an important role on the failure process of cracked tubular T-joints.

키워드

참고문헌

  1. Bjork, T., Marquis, G. and Heinila, S. (2008), "Assessment of subzero fracture of welded tubular K-joint", J. Struct. Eng., ASCE, 134(2), 181-188. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:2(181)
  2. Borges, L., Chiew, S.P., Nussbaumer, A. and Lee, C.K. (2012), "Advanced numerical modelling of cracked tubular K-joints: BEM and FEM comparison", J. Bridge Eng., 17(3), 432-442. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000274
  3. BS7910 (2013), Guide to methods for assessing the acceptability of flaws in metallic structures; BSI Standards Publication, UK.
  4. Chiew, S.P., Lie, S.T., Lee, C.K. and Huang, Z.W. (2004), "Fatigue performance of cracked tubular T-joints under combined loads. I: Experimental", J. Struct. Eng., ASCE, 130(4), 562-571. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:4(562)
  5. Chiew, S.P., Lee, C.K., Lie, S.T. and Nguyen, T.B.N. (2009), "Fatigue study of partially overlapped CHS K-joints. Part II: experimental study and validation of numerical models", Eng. Fract. Mech., 76(16), 2408-2428. https://doi.org/10.1016/j.engfracmech.2009.08.005
  6. Cui, M.J. and Shao, Y.B. (2015), "Residual static strength of cracked concrete-filled circular steel tubular (CFCST) T-joint", Steel Compos. Struct., Int. J., 18(4), 1045-1062. https://doi.org/10.12989/scs.2015.18.4.1045
  7. Fathi, A. and Aghakouchak, A.A. (2007), "Prediction of fatigue crack growth rate in welded tubular joints using neural network", Int. J. Fatigue, 29(2), 261-275. https://doi.org/10.1016/j.ijfatigue.2006.03.002
  8. Hanji, T., Park, J.E. and Tateishi, K. (2014), "Low cycle fatigue assessment of corner welded joints based on local strain approach", Int. J. Steel Struct., 14(3), 579-587. https://doi.org/10.1007/s13296-014-3015-8
  9. HSE (2002), The static strength of cracked joints in tubular members; Offshore Technology Report, UK.
  10. Huang, Z.W. (2002), "Stress intensity factor of cracked steel tubular T and Y-joints under complex loads", Ph.D. Thesis; Nanyang Technological University, Singapore.
  11. International Institute of Welding (IIW) (1999), Recommended Fatigue Design Procedure for Hollow Section Joints: Part 1-Hot Spot Stress Method for Nodal Joints, IIW Doc. XV-1035-99, XV-E-99-251, XIII-1804-99, Lisbon, Portugal, July.
  12. Jia, L.J. (2014), "Effect of post weld treatment on cracking behaviors of beam-column connections in steel bridge piers", Steel Compos. Struct., Int. J., 17(5), 685-702.
  13. Jia, L.J., Ikai, T., Kang, L. and Kato, T. (2016), "Ductile cracking simulation procedure for welded joints under monotonic tension", Struct. Eng. Mech., Int. J., 60(1), 51-69. https://doi.org/10.12989/sem.2016.60.1.051
  14. Jiki, P.N. and Agber, J.U. (2014), "Damage evaluation in gap tubular truss 'K'bridge joints using SFEM", J. Constr. Steel Res., 93, 135-142. https://doi.org/10.1016/j.jcsr.2013.10.010
  15. Lee, C.K., Lie, S.T., Chiew, S.P. and Shao, Y.B. (2005), "Numerical models verification of cracked tubular T, Y and Kjoints under combined loads", Eng. Fract. Mech., 72(7), 983-1009. https://doi.org/10.1016/j.engfracmech.2004.07.006
  16. Lie, S.T. and Yang, Z.M. (2009a), "Fracture assessment of damaged square hollow section (SHS) K-joint using BS7910: 2005", Eng. Fract. Mech., 76(9), 1303-1319. https://doi.org/10.1016/j.engfracmech.2009.02.008
  17. Lie, S.T. and Yang, Z.M. (2009b), "Safety assessment procedure for a cracked square hollow section (SHS) Y-joint", Adv. Struct. Eng., 12(3), 359-372. https://doi.org/10.1260/136943309788708347
  18. Lie, S.T., Yang, Z.M. and Gho, W.M. (2009b), "Validation of BS7910:2005 Failure assessment diagrams for cracked square hollow section T-, Y-and K-joints", Int. J. Press. Vessels Piping, 86(5), 335-344. https://doi.org/10.1016/j.ijpvp.2008.11.015
  19. Liu, G.J., Zhong, B.L., Tian, X.J., Chen, P.F. and Mu, W.L. (2016), "Numerical analysis on the HSS and SIF of multi-planar DXjoint welds for offshore platforms", Ocean Eng., 127, 258-268. https://doi.org/10.1016/j.oceaneng.2016.10.002
  20. Lu, L.H., de Winkel, G.D., Yu, Y. and Wardenier, J. (1994), "Deformation limit for the ultimate strength of hollow section joints", Proceedings of the 6th International Symposium on Tubular Structures, Melbourne, Australia, December, pp. 341-348.
  21. Mashiri, F.R. and Zhao, X.L. (2010), "Square hollow section (SHS) T-joints with concrete-filled chords subjected to in-plane fatigue loading in the brace", Thin-Wall. Struct., 48(2), 150-158. https://doi.org/10.1016/j.tws.2009.07.010
  22. National Standard of the People's Republic of China (2007), Metallic materials-Charpy pendulum impact test method (GB/T 229-2007).
  23. Qian, X.D. and Li, Y. (2013), "A compliance-based approach to measure fracture resistance curve for surface cracked steel plates", Int. J. Fract., 182(1), 1-19. https://doi.org/10.1007/s10704-013-9850-3
  24. Qian, X.D., Zhang, Y. and Choo, Y.S. (2013), "A load-deformation formulation with fracture representation based on the J-R curve for tubular joints", Eng. Fail. Anal., 33, 347-366. https://doi.org/10.1016/j.engfailanal.2013.06.004
  25. Shao, Y.B. (2005), "Fatigue behaviour of uniplanar tubular Kjoints under axial and in-plane bending loads", Ph.D. Thesis; School of Civil and Environmental Engineering, Nanyang Technological University, Singapore.
  26. Shao, Y.B. (2007), "Geometrical effect on the stress distribution along weld toe for tubular T-and K-joints under axial loading", J. Constr. Steel Res., 63(9), 1351-1360. https://doi.org/10.1016/j.jcsr.2006.12.005
  27. Shao, Y.B. and Cao, Z.B. (2005), "Experimental and numerical analysis of fatigue behaviour for tubular K-joints", Struct. Mech., 19(6), 639-652. https://doi.org/10.12989/sem.2005.19.6.639
  28. Shen, W. and Choo, Y.S. (2012), "Stress intensity factor for a tubular T-joint with grouted chord", Eng. Struct., 35, 37-47. https://doi.org/10.1016/j.engstruct.2011.10.014
  29. Talei-Faz, B., Brennan, F.P. and Dover, W.D. (2004), "Residual static strength of high strength steel cracked tubular joints", Marine Struct., 17(3), 291-309. https://doi.org/10.1016/j.marstruc.2004.08.006
  30. Thandavamoorthy, T.S. (2004), "Reserve capacity of fatigue damaged internally ring stiffened tubular joints", Steel Compos. Struct., Int. J., 4(2), 149-167. https://doi.org/10.12989/scs.2004.4.2.149
  31. Wardenier, J., Kurobane, Y., Packer, J.A., Van der Vegte, G.J. and Zhao, X.L. (2008), Design guide for circular hollow section (CHS) joints under predominantly static loading; Comite International pour le Developpement et l'etude de la Construction Tubulaire (CIDECT), Germany.
  32. Yagi, K., Tanaka, S., Kawahara, T., Nihei, K., Okada, H. and Osawa, N. (2017), "Evaluation of crack propagation behaviors in a T-shaped tubular joint employing tetrahedral FE modeling", Int. J. Fatigue, 96, 270-282. https://doi.org/10.1016/j.ijfatigue.2016.11.028
  33. Yang, J.F., Yang, C., Su, M.Z. and Lian, M. (2016), "Stress concentration factors test of reinforced concrete-filled tubular Yjoints under in-plane bending", Steel Compos. Struct., Int. J., 22(1), 203-216. https://doi.org/10.12989/scs.2016.22.1.203
  34. Zerbst, U., Heerens, J. and Schwalbe, K.H. (2002), "The fracture behaviour of a welded tubular joint--an ESIS TC1.3 round robin on failure assessment methods. Part I: experimental data base and brief summary of the results", Eng. Fract. Mech., 69(10), 1093-1110. https://doi.org/10.1016/S0013-7944(01)00140-0
  35. Zhang, Y. and Qian, X.D. (2013), "An eta approach to evaluate the elastic-plastic energy release rate for weld-toe cracks in tubular K-joints", Eng. Struct., 51, 88-98. https://doi.org/10.1016/j.engstruct.2013.01.013

피인용 문헌

  1. Strength Reduction Factors for Cracked Multi-planar Tubular DT-joints vol.23, pp.1, 2019, https://doi.org/10.1007/s12205-018-0547-z
  2. Effect of chord axial stresses on the static strength of cracked tubular T/Y-joints under out-of-plane and in-plane bending vol.22, pp.7, 2019, https://doi.org/10.1177/1369433218824487