DOI QR코드

DOI QR Code

Space grid analysis method in modelling shear lag of cable-stayed bridge with corrugated steel webs

  • Ma, Ye (Research Institute of Highway Ministry of Transport, M.O.T.) ;
  • Ni, Ying-Sheng (Research Institute of Highway Ministry of Transport, M.O.T.) ;
  • Xu, Dong (Department of Bridge Engineering, Tongji Universtiy) ;
  • Li, Jin-Kai (China Railway Engineering Design Consulting Group Co., Ltd)
  • 투고 : 2016.12.27
  • 심사 : 2017.05.09
  • 발행 : 2017.08.10

초록

As few multi-tower single-box multi-cell cable-stayed bridges with corrugated steel webs have been built, analysis is mostly achieved by combining single-girder model, beam grillage model and solid model in support of the design. However, such analysis methods usually suffer from major limitations in terms of the engineering applications: single-girder model fails to account for spatial effect such as shear lag effect of the box girder and the relevant effective girder width and eccentric load coefficient; owing to the approximation in the principle equivalence, the plane grillage model cannot accurately capture shear stress distribution and local stress state in both top and bottom flange of composite box girder; and solid model is difficult to be practically combined with the overall calculation. The usual effective width method fails to provide a uniform and accurate "effective length" (and the codes fail to provide a unified design approach at those circumstance) considering different shear lag effects resulting from dead load, prestress and cable tension in the construction. Therefore, a novel spatial grid model has been developed to account for shear lag effect. The theoretical principle of the proposed spatial grid model has been elaborated along with the relevant illustrations of modeling parameters of composite box girder with corrugated steel webs. Then typical transverse and longitudinal shear lag coefficient distribution pattern at the side-span and mid-span key cross sections have been analyzed and summarized to provide reference for similar bridges. The effectiveness and accuracy of spatial grid analysis methods has been finally validated through a practical cable-stayed bridge.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Hassanein, M.F. and Kharoob, O.F. (2013), "Behavior of bridge girders with corrugated webs: (II) Shear strength and design", Eng. Struct., 57, 544-543. https://doi.org/10.1016/j.engstruct.2013.04.015
  2. He, J., Chen, A. and Liu, Y. (2007), "Analysis on structural system and mechanical behavior of box girder bridge with corrugated steel webs", Proceedings of the 3rd International Conference on Steel and Composite Structures (ICSC07), Manchester, UK, July-August, pp. 489-494.
  3. He, J., Liu, Y., Chen, A. and Yoda, T. (2012), "Mechanical behavior and analysis of composite bridges with corrugated steel webs: State-of-the-art", Int. J. Steel Struct., 12(3), 321-338. https://doi.org/10.1007/s13296-012-3003-9
  4. Jiang, L., Qi, J., Scanlon, A. and Sun, L. (2013), "Distortional and local buckling of steel-concrete composite box-beam", Steel Compos. Struct., Int. J., 14(3), 243-265. https://doi.org/10.12989/scs.2013.14.3.243
  5. Kim, K.S., Lee, D.H., Choi, S.M., Choi, Y.H. and and Jung, S.H. (2011), "Flexural behavior of prestressed composite beams with corrugated web: part I. Development and analysis", Composites: Part B, 42(6), pp. 1603-1616. https://doi.org/10.1016/j.compositesb.2011.04.020
  6. Ko, H.J., Moon, J., Shin, Y.W. and Lee, H.E. (2013), "Non-linear analyses model for composite box-girders with corrugated steel webs under torsion", Steel Comp. Struct., Int. J., 14(5), 409-429. https://doi.org/10.12989/scs.2013.14.5.409
  7. Li, G.Q. and Wang, W.Y. (2013), "A simplified approach for fireresistance design of steel-concrete composite beams", Steel Comp. Struct., Int. J., 14(3), 295-312. https://doi.org/10.12989/scs.2013.14.3.295
  8. Liu, C. and Xu, D. (2010), "Space frame latice model for stress analysis of bridge", Baltic J. Road Bridge Eng., 5(2), pp. 98-103. https://doi.org/10.3846/bjrbe.2010.14
  9. Liu, C. and Xu, D. (2012), "Influence of cracking on deflections of concrete box girder bridges", Baltic J. Road Bridge Eng., 7(2), 104-111. https://doi.org/10.3846/bjrbe.2012.15
  10. Liu, X.G., Fan, J.S., Nie, J.G., Bai, Y., Han, Y.X. and Wu, W.H. (2015), "Experimental and analytical studies of prestressed concrete girders with corrugated steel webs", Mater. Struct., 48(8), 2505-2520. https://doi.org/10.1617/s11527-014-0334-3
  11. Liu, W., Zhang, F., Li, P., Zhang, R. and Wan, S. (2016), "Mechanical analysis of prestressed concrete partially cablestayed bridge with corrugated steel webs", Advances in Engineering Research, Proceedings of the 4th International Conference on Sustainable Energy and Environmental Engineering (ICSEEE 2015), Shenzhen, China, December, pp. 166-170.
  12. Maeda, Y., Iijima, M. and Asai, H. (2005), "The extradose cable anchorage and ultimate behavior for extrdosed bridge with corrugated steel webs", Proceeding of JSCE, 794, 227-238.
  13. Nie, J., Tao, M., Cai, C.S. and Li, S. (2011), "Analytical and numerical modeling of prestressed continuous steel-concrete composite beams", J. Struct. Eng. ASCE, 137(12), 1405-1428. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000409
  14. Oh, J.Y., Lee, D.H. and Kim, K.S. (2012), "Accordion effect of prestressed steel beams with corrugated webs", Thin-Wall. Struct., 57, 49-61. https://doi.org/10.1016/j.tws.2012.04.005
  15. Otani, M. and Arai, T. (2006), "Outline of TOYOTA-Arrows-Bridge", Technical Report of Kawada Construction Co. LTD.; Volume 25, pp. 48-53.
  16. Shan, C.L. and Yan, L. (2011), "Creep stress analysis of PC composite box girder bridge with corrugated steel webs", Adv. Mater. Res., 163, 1987-1990.
  17. Shao, X., Wang, H., Zhao, H. and Chang, Y. (2010), "Experimental study on multicantilever prestressed composite beams with corrugated steel webs", J. Struct. Eng., ASCE, 136(9), 1098-1110. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000204
  18. Wang, F., Deng, G., Dang, X. and Yuan, W. (2015), "Seismic characteristics study of six-pylon cable-stayed bridge with corrugated steel webs", Energy, Environment and Green Building Materials: Proceedings of the 2015 International Conference on Energy, Environment and Green Building Materials (EEGBM 2015), Guilin, China, November, pp. 80-94.
  19. Yasukawa, Y. (2003), "Plan and design of Ritto Bridge", Proceedings of the 5th Japanese-German Joint Symposium on steel and Composite Bridges, Osaka, Japan, September, pp. 143-148.
  20. Xu, D. and Zhao, Y. (2012), "Application of spatial grid model in structural analysis of concrete box girder bridges", Proceedings of the 18th Congress of International Association for Bridge and Structural Engineering (IABSE Congress Report), Seoul, Korea, September, Volume 18, No. 2, pp. 2009-2016.

피인용 문헌

  1. A New Approach for Free Vibration Analysis of Thin-Walled Box Girder Considering Shear Lag Effect vol.2019, pp.None, 2017, https://doi.org/10.1155/2019/3902828
  2. Chaoyang Bridge, China: a double-deck cable-stayed bridge with corrugated steel webs. vol.172, pp.1, 2017, https://doi.org/10.1680/jcien.18.00018
  3. Effective width of steel-concrete composite beams under negative moments in service stages vol.38, pp.4, 2017, https://doi.org/10.12989/scs.2021.38.4.415