References
-
Mentus, Slavko, et al. "Gel-combustion synthesis of NiO-
$MoO_3$ mixtures and their reduction to Ni-Mo alloys." Materials Chemistry and Physics 112.1 (2008): 254-261. https://doi.org/10.1016/j.matchemphys.2008.05.043 -
Saghafi, M., et al. "Synthesis of nanocrystalline molybdenum by hydrogen reduction of mechanically activated
$MoO_3$ ." International Journal of Refractory Metals and Hard Materials 30.1 (2012): 128-132. https://doi.org/10.1016/j.ijrmhm.2011.07.014 - Yagi, Sakae, and Daizo Kunii. "Fluidized-solids reactors with continuous solids feed-I: Residence time of particles in fluidized beds." Chemical Engineering Science 16.3-4 (1961): 364-371. https://doi.org/10.1016/0009-2509(61)80043-2
- Song, Lianying, Tao Zhou, and Jingsi Yang. "Fluidization behavior of nano-particles by adding coarse particles." Advanced Powder Technology 20.4 (2009): 366-370. https://doi.org/10.1016/j.apt.2009.02.010
- Geldart, Derek. "Types of gas fluidization." Powder technology 7.5 (1973): 285-292. https://doi.org/10.1016/0032-5910(73)80037-3
- Garncarek, Zbigniew, et al. "A quantitative assessment of the effect of distributor type on particle circulation." Powder technology 91.3 (1997): 209-216. https://doi.org/10.1016/S0032-5910(96)03256-1
- Gauthier, D., S. Zerguerras, and G. Flamant. "Influence of the particle size distribution of powders on the velocities of minimum and complete fluidization." Chemical Engineering Journal 74.3 (1999): 181-196. https://doi.org/10.1016/S1385-8947(99)00075-3
- Evans, J. W., S. Song, and C. E. Leon-Sucre. "The kinetics of nickel oxide reduction by hydrogen; measurements in a fluidized bed and in a gravimetric apparatus." Metallurgical and Materials Transactions B 7.1 (1976): 55-65.
- Kunii, Daizo, and Octave Levenspiel. Fluidization engineering. Elsevier, 2013.
- Gauthier, D., S. Zerguerras, and G. Flamant. "Influence of the particle size distribution of powders on the velocities of minimum and complete fluidization." Chemical Engineering Journal 74.3 (1999): 181-196. https://doi.org/10.1016/S1385-8947(99)00075-3
- Ching, Yang Wen. "Handbook of fluidization and fluid-particle systems." (2003).
- Molerus, O. "Interpretation of Geldart's type A, B, C and D powders by taking into account interparticle cohesion forces." Powder technology 33.1 (1982): 81-87. https://doi.org/10.1016/0032-5910(82)85041-9
- Rhodes, M. J. (2008). Introduction to particle technology. John Wiley & Sons.
- Garncarek, Zbigniew, et al. "A quantitative assessment of the effect of distributor type on particle circulation." Powder technology 91.3 (1997): 209-216. https://doi.org/10.1016/S0032-5910(96)03256-1
- Sobrino, Celia, Naoko Ellis, and Mercedes de Vega. "Distributor effects near the bottom region of turbulent fluidized beds." Powder Technology 189.1 (2009): 25-33. https://doi.org/10.1016/j.powtec.2008.05.012
- Morooka, Shigeharu, et al. "Fluidization state of ultrafine powders." Journal of Chemical Engineering of Japan 21.1 (1988): 41-46. https://doi.org/10.1252/jcej.21.41
- Menon, Narayanan, and Douglas J. Durian. "Particle motions in a gas-fluidized bed of sand." Physical Review Letters 79.18 (1997): 3407. https://doi.org/10.1103/PhysRevLett.79.3407
- Gauthier, D., S. Zerguerras, and G. Flamant. "Influence of the particle size distribution of powders on the velocities of minimum and complete fluidization." Chemical Engineering Journal 74.3 (1999): 181-196. https://doi.org/10.1016/S1385-8947(99)00075-3
- Wu, S. Y., and J. Baeyens. "Effect of operating temperature on minimum fluidization velocity." Powder technology 67.2 (1991): 217-220. https://doi.org/10.1016/0032-5910(91)80158-F