Journal of the Architectural Institute of Korea Structure & Construction (대한건축학회논문집:구조계)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

Open Housing Structure Model for the Degree of Freedom on the Design of the Multi-residential Building

공동주택 디자인 자유도를 위한 오픈하우징 구조모델

  • 노삼영 (한양대 건축학부 건축공학전공) ;
  • 손영진 ((주)콘스텍) ;
  • 임지택 (한양대 건축학부 건축학전공) ;
  • 김호준 (한양대 일반대학원 건축시스템공학과) ;
  • 이주성 (건구조 엔지니어링)
  • Received : 2017.04.20
  • Accepted : 2017.06.07
  • Published : 2017.07.28
⟨ Previous Next ⟩

Abstract

In this study, a reference plane module of the multi-residential building is proposed for applying open housing method. It makes possible to procure a degree of freedom on the elevation design, especially by introducing the Architectural Precast Concrete(APC) panel. A spatial common bay-width was found by analyzing typical spatial units of Korean multi-residential buildings and modularized by a 3-story unit plane. It consists of two mesonnette units and two plane units. The building was classified into three types based on shear wall types and the number of building stories. For each type column sections and concrete strength were analysed, considering the constructability of an efficient formwork system for construction costs. The connection locations between APC and structure were suggested by the stress analysis under the wind load and lifting load. The APC panel with a thickness of 100mm was designed taking into account the self-weight, wind load and lifting load.

Keywords

Acknowledgement

Supported by : 국토교통부

References

  1. Korean Building Code (KBC) (2016). Architectural Institute of Korea.
  2. Hwang, S. J., & Moehle, J. P. (1993). An Experimental Study of Flat-plate Structures Under Vertical and Lateral Load, University of California, Berkeley, 93.
  3. Hwang, S. J., & Moehle, J. P. (2000). Vertical and Lateral load Tests of Nine-Panel Flat-Plate Frame, ACI Structural Journal, 97(1), 193-203.
  4. Grossman, J. S. (1997). Verification of proposed design methodologies for effective width of slabs in slab-column frames, ACI structural journal, 94(2), 181-196.
  5. Choi, J. W., & Song, J. G. (2002). Modeling Method of Slabs in RC Flat-Plate Structures Under Lateral Loading, Journal of the Korea Concrete Institute, 14(4), 615-622. https://doi.org/10.4334/JKCI.2002.14.4.615
  6. MIDAS Gen (2016), General Structure Design System for Windows, MIDAS IT.
  7. Precast/Prestressed Concrete Institute(PCI) (2007). PCI Architectural Precast Concrete Manual, 3rd ed., MNL-122-07, Architectural Precast Concrete Committee.
  8. Korea Concrete Institute (KCI) (2007). Precast Prestressed Concrete Design Handbook. Kwangmoonkag.
  9. Leonhardt, F., & Monnig, E. (1975). Vorlesungen uber Massivbau - Zweiter Teil: Sonderfalle der Bemessung im Stahlbetonbau, Springer-Verlag Berlin Heidelberg.