References
- F. L. Riley, "Silicon Nitride and Related Materials," J. Am. Ceram. Soc., 83 [2] 245-65 (2000). https://doi.org/10.1111/j.1151-2916.2000.tb01182.x
- D. A. Gunn, "A Theoretical Evaluation of the Stability of Sialon Bonded Silicon Carbide in the Blast Furnace Environment," J. Eur. Ceram. Soc., 11 [1] 35-41 (1993). https://doi.org/10.1016/0955-2219(93)90056-W
- F. F. Lange, "Silicon Nitride Polyphase Systems: Fabrication, Microstructure, and Properties," Int. Met. Rev., 25 [1] 1-20 (1980). https://doi.org/10.1179/imtr.1980.25.1.1
-
F. Lu, Q. Cai, L. Lu, Z. Zhang, and Z. Wang, "The Effects of Shock Activation on Sintering
$Si_3N_4$ Ceramics," J. Mater. Process. Technol., 147 [1] 90-3 (2004). https://doi.org/10.1016/j.jmatprotec.2003.11.033 - K. Kijima and S. Shirasaki, "Nitrogen Self-diffusion in Silicon Nitride," J. Chem. Phys., 65 [7] 2668-71 (1976). https://doi.org/10.1063/1.433464
-
P. Pettersson, Z. Shen, M. Johnsson, and M. Nygren, "Thermal Shock Properties of
${\beta}$ -sialon Ceramics," J. Eur. Ceram. Soc., 22 [8] 1357-65 (2002). https://doi.org/10.1016/S0955-2219(01)00429-0 - M. Lewis, B. Powell, P. Drew, R. Lumby, B. North, and A. Taylor, "The Formation of Single-Phase Si-Al-ON Ceramics," J. Mater. Sci., 12 61-74 (1977). https://doi.org/10.1007/BF00738472
-
J. S. Park, H. J. Lee, S. S. Ryu, S. M. Lee, H. J. Hwang, and Y. S. Han, "Optimization of Binder Burnout for Reaction Bonded
$Si_3N_4$ Substrate Fabrication by Tape Casting Method," J. Korean Ceram. Soc., 52 [6] 435-40 (2015). https://doi.org/10.4191/kcers.2015.52.6.435 - A. R. Kheirandish, K. A. Nekouee, R. A. Khosroshahi, and N. Ehsani, "Self-Propagating High Temperature Synthesis of SiAlON," Int. J. Refract. Met. Hard Mater., 55 68-79 (2016). https://doi.org/10.1016/j.ijrmhm.2015.11.010
-
K. Niihara, R. Morena, and D. P. H. Hasselman, "Evaluation of
$K_{IC}$ of Brittle Solids by The Indentation Method with Low Crack-to-Indentation Ratios," J. Mater. Sci. Lett., 1 [1] 13-6 (1982). https://doi.org/10.1007/BF00724706 -
H. R. Park, O. S. Lee, H. D. Park, and J. D. Lee, "Effect of Microstructures and Sintering Additives on the Mechanical Properties of
$Si_3N_4$ ," Korean J. Mater. Res., 2 [5] 330-36 (1992). - S. T. Aruna and A. S. Mukasyan, "Combustion Synthesis and Nanomaterials," Curr. Opin. Solid State Mater. Sci., 12 [3] 44-50 (2008). https://doi.org/10.1016/j.cossms.2008.12.002
- "Development of SiAlON Roll-Bearing for CGL Application," Report for KIMS-Funded Project (2013).
-
F. F. Lange, "High-Temperature Strength Behavior of Hot-Pressed
$Si_3N_4$ : Evidence for Subcritical Crack Growth," J. Am. Ceram. Soc., 57 [2] 84-7 (1974). https://doi.org/10.1111/j.1151-2916.1974.tb10819.x - G. Petzow and M. Herrmann, Silicon Nitride Ceramics, Structure and Bonding; Vol. 102, Springer-Verlag, Berlin, Heidelberg, 2002.
Cited by
- Development of DLC-Coated Solid SiAlON/TiN Ceramic End Mills for Nickel Alloy Machining: Problems and Prospects vol.11, pp.5, 2017, https://doi.org/10.3390/coatings11050532