고분자캐패시터에 대한 충방전 조건에서의 온도에 따른 정전용량감소 특성 연구

Study on Capacitance Decreasing Characteristics of Polymer Capacitor Depending on Temperature with Charging-Discharging Condition

  • 투고 : 2017.02.09
  • 심사 : 2017.03.17
  • 발행 : 2017.03.25

초록

Purpose: Polymer capacitors are known to have very high reliability as compared with liquid electrolytic capacitors, but their capacity has been reported to decrease in charge and discharge at low temperature. The purpose of this study to clarify these characteristics. Methods: In order to clarify these characteristics, charging-discharging tests were carried out for 200 hours with three different capacities and at 5 different temperature from $5^{\circ}C$ to $100^{\circ}C$. Results: As a result of the test, it was confirmed that the capacity of the polymer capacitor was decreased with higher capacity and lower temperature. Conclusion: Such a failure phenomenon was caused by the shrinkage and expansion characteristics of the polymer used therein, it is presumed that this failure phenomenon is due to the complex pore structure made by etching.

키워드

참고문헌

  1. Yoshimura, S., Itoh, Y., Yasuda, M., Murakami, M., Takahashi, S., and Hasegawa, K. (1975). "Aluminum solid electrolytic capacitor with an organic semiconductor electrolyte". IEEE Transactions on Parts, Hybrids, and Packaging, Vol. 11, No. 4, pp. 315-321. https://doi.org/10.1109/TPHP.1975.1135082
  2. Kudoh, Y., Fukuyama, M., and Yoshimura, S. (1994). "Stability study of polypyrrole and application to highly thermostable aluminumsolid electrolytic capacitor". Synthetic Metals , Vol. 66, No. 2, pp. 157-164. https://doi.org/10.1016/0379-6779(94)90093-0
  3. Jeong, U. H. et al. (2016). "Charging-discharging characteristics of a wound aluminum polymer capacitor". Microelectronics Reliability, Vol. 64, pp. 447-452. https://doi.org/10.1016/j.microrel.2016.07.078
  4. Nishino, A. (1996). "Capacitors: operating principles, current market and technical trends". Journal of Power Sources, Vol. 60, No. 2, pp. 137-147. https://doi.org/10.1016/S0378-7753(96)80003-6
  5. Sarjeant, W. (1998). "Capacitors". IEEE Transactions on Plasma Science, Vol. 26, No. 5, pp. 1368-1392. https://doi.org/10.1109/27.736020
  6. Kulkarni, C. S., Celya, J., Goebel, K., and Biswas, G. (2013). "Physics based electrolytic capacitor degradation models". European Conference Of the Prognostics and Health Management Society, pp. 2-9.
  7. Gasperi, M. L. (1996). "Life prediction model for aluminum electrolytic capacitors". IEEE Industry Applications Conference, Vol. 3, pp. 1347-1351.
  8. International Electrotechnical Commission (2010). "IEC 60384-26, Fixed capacitors for use in electronic equipment- Part 26: Sectional specification-Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte".