Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Static and free vibration behaviour of orthotropic elliptic paraboloid shells

  • Darilmaz, Kutlu (Department of Civil Engineering, Istanbul Technical University)
  • Received : 2016.08.06
  • Accepted : 2017.01.02
  • Published : 2017.04.30
⟨ Previous Next ⟩

Abstract

In this paper the influence of aspect ratio, height ratio and material angle on static and free vibration behaviour of orthotropic elliptic paraboloid shells is studied by using a four-node hybrid stress finite element. The formulation of the element is based on Hellinger-Reissner variational principle. The element is developed by combining a hybrid plane stress element and a hybrid plate element. A parametric study is carried out for static and free vibration response of orthotropic elliptic paraboloid shells with respect to displacements, internal forces, fundamental frequencies and mode shapes by varying the aspect and height ratios, and material angle.

Keywords

References

  1. Aass, A. (1963), "A contribution to the bending theory of elliptic paraboloid shells", IABSE, 23, p. 1.
  2. Allman, D.J. (1984), "A compatible triangular element including vertex rotations for plane elasticity problems", Comp. Struct., 19(1-2), 1-8. https://doi.org/10.1016/0045-7949(84)90197-4
  3. Bergan, P.G. and Felippa, C.A. (1985), "A triangular membrane element with rotational degrees of freedom", Comp. Methods Appl. Mech. Eng., 50(1), 25-69. https://doi.org/10.1016/0045-7825(85)90113-6
  4. Bochkarev, S.A., Lekomtsev, S.V. and Matveenko, V.P. (2015), "Natural vibrations of loaded noncircular cylindrical shells containing a quiescent fluid", Thin-Wall. Struct., 90, 12-22. https://doi.org/10.1016/j.tws.2015.01.001
  5. Choi, C.K. and Lee, W.H. (1996), "Versatile variable-node flatshell element", J. Eng. Mech., 122(5), 432-441. https://doi.org/10.1061/(ASCE)0733-9399(1996)122:5(432)
  6. Chun, K.S., Kassegne, S.K. and Wondimu, B.K. (2009), "Hybrid/mixed assumed stress element for anisotropic laminated elliptical and parabolic shells", Finite Elem. Anal. Des., 45(11), 766-781. https://doi.org/10.1016/j.finel.2009.06.004
  7. Cook, R.D. (1986), "On the Allman triangle and a related quadrilateral element", Comp. Struct., 22(6), 1065-1067. https://doi.org/10.1016/0045-7949(86)90167-7
  8. Ganapathi, M. and Haboussi, M. (2003), "Free vibrations of thick laminated anisotropic non-circular cylindrical shells", Compos. Struct., 60(2), 125-133. https://doi.org/10.1016/S0263-8223(02)00339-2
  9. Darilmaz, K. (2005), "An assumed-stress finite element for static and free vibration analysis of Reissner-Mindlin plates", Struct. Eng. Mech., Int. J., 19(2), 199-215. https://doi.org/10.12989/sem.2005.19.2.199
  10. Darilmaz, K. (2007), "An assumed-stress hybrid element for static and free vibration analysis of folded plates", Struct. Eng. Mech., Int. J., 25(4), 405-421. https://doi.org/10.12989/sem.2007.25.4.405
  11. Darilmaz, K. (2012), "Stiffened orthotropic corner supported hypar shells: Effect of stiffener location, rise/span ratio and fiber orientaton on vibration behavior", Steel Compos. Struct., Int. J., 12(4), 275-289. https://doi.org/10.12989/scs.2012.12.4.275
  12. Darilmaz, K. and Kumbasar, N. (2006), "An 8-node assumed stress hybrid element for analysis of shells", Comp. Struct., 84(29), 1990-2000. https://doi.org/10.1016/j.compstruc.2006.08.003
  13. Feng, W., Hoa, S.V. and Huang, Q. (1997), "Classification of stress modes in assumed stress fields of hybrid finite elements", Int. J. Num. Meth. Eng., 40(23), 4313-4339. https://doi.org/10.1002/(SICI)1097-0207(19971215)40:23<4313::AID-NME259>3.0.CO;2-N
  14. Ganapathi, M., Patel, B.P. and Patel, H.G. (2004), "Free flexural vibration behavior of laminated angle-ply elliptical cylindrical shells", Comp. Struct., 82(6), 509-518. https://doi.org/10.1016/j.compstruc.2003.10.016
  15. Ibrahimbegovic, A., Taylor, R.L. and Wilson, E.L. (1990), "A robust quadrilateral membrane finite element with drilling degrees of freedom", Int. J. Numer. Methods Eng., 30(3), 445-457. https://doi.org/10.1002/nme.1620300305
  16. Kang, J.H. (2015), "Vibration analysis of free-fixed hyperbolic cooling toer shells", Struct. Eng. Mech., Int. J., 55(4), 785-799. https://doi.org/10.12989/sem.2015.55.4.785
  17. Kazemi, E., Darvizeh, M., Darvizeh, A. and Ansari, R. (2012), "An investigation of the buckling behavior of composite elliptical cylindrical shells with piezoelectric layers under axial compression", Acta Mech., 223(10), 2225-2242. https://doi.org/10.1007/s00707-012-0705-1
  18. Lo, H.C. and Hyer, M.W. (2012), "Fundamental natural frequencies of thin-walled elliptical composite cylinders", J. Compos. Mater., 46(10), 1169-1190. https://doi.org/10.1177/0021998311413691
  19. MacNeal, R.H. and Harder, R.L. (1988), "A refined four-noded membrane element with rotational degrees of freedom", Compos. Struct., 28(1), 75-84. https://doi.org/10.1016/0045-7949(88)90094-6
  20. Mohraz, B. and Schnobrich, W.C. (1966), "The analysis of shallow shell structures by a discrete element system", Civil Engineering Studies, Structural Research Series No. 304.
  21. Patel, B.P., Gupta, S.S., Loknath, M.S. and Kadu, C.P. (2005), "Free vibration analysis of functionally graded elliptical cylindrical shells using higher-order theory", Compos. Struct., 69(3), 259-270. https://doi.org/10.1016/j.compstruct.2004.07.002
  22. Pian, T.H.H. (1964), "Derivation of element stiffness matrices by assumed stress distributions", AIAA J., 2(7), 1333-1336. https://doi.org/10.2514/3.2546
  23. Pian, T.H.H. and Chen, D.P. (1983), "On the suppression of zero energy deformation modes", Int. J. Num. Meth. Eng., 19(12), 1741-1752. https://doi.org/10.1002/nme.1620191202
  24. Punch, E.F. and Atluri, S.N. (1984), "Development and testing of stable, isoparametric curvilinear 2 and 3-D hybrid stress elements", Comput. Meth. Appl. Mech. Eng., 47, 331-356. https://doi.org/10.1016/0045-7825(84)90083-5
  25. Sambandam, C.T., Patel, B.P., Gupta, S.S., Munot, C.S. and Ganapathi, M. (2003), "Buckling characteristics of cross-ply elliptical cylinders under axial compression", Compos. Struct., 62(1), 7-17. https://doi.org/10.1016/S0263-8223(03)00079-5
  26. Suzuki, K., Shikanai, G. and Leissa, A.W. (1996), "Free vibrations of laminated composite non-circular thick cylindrical shells", Int. J. Solids Struct., 33(27), 4079-4100. https://doi.org/10.1016/0020-7683(95)00227-8
  27. Yunus, S.M., Saigal, S. and Cook, R.D. (1989), "On improved hybrid finite elements with rotational degrees of freedom", Int. J. Numer. Meth. Eng., 28(4), 785-800. https://doi.org/10.1002/nme.1620280405
  28. Zhang, J.F., Chen, H., Ge, Y.J., Zhao, L. and Ke, S.T. (2014), "Effects of stiffening rings on the dynamic properties of hyperboloidal cooling towers", Struct. Eng. Mech., Int. J., 49(5), 619-629. https://doi.org/10.12989/sem.2014.49.5.619

Cited by

  1. Free vibration analysis of sandwich FGM shells using isogeometric B-spline finite strip method vol.34, pp.3, 2020, https://doi.org/10.12989/scs.2020.34.3.361
  2. Mechanical analysis of functionally graded spherical panel resting on elastic foundation under external pressure vol.74, pp.2, 2017, https://doi.org/10.12989/sem.2020.74.2.297