Acknowledgement
Supported by : State Key Laboratory of Disaster Reduction in Civil Engineering, State Key Laboratory for GeoMechanics and Deep Underground Engineering, State Key Laboratory of Geohazard Prevention and Geoenvironemt Protection, Ministry of Education, Science and Technology Commission of Shanghai Municipality
References
- ABAQUS (2013), Abaqus 6.13_1 analysis user's manual, Dassault Systemes Simulia Corp, Providence, RI, USA.
- Aboshosha, H., Elshaer, A., Bitsuamlak, G.T. and Damatty, E.A. (2015), "Consistent inflow turbulence generator for LES evaluation of wind-induced responses for tall buildings", J. Wind Eng. Ind. Aerod., 142, 198-216. https://doi.org/10.1016/j.jweia.2015.04.004
- An, Y., Quan, Y. and Gu, M. (2012), "Field measurement of wind characteristics of typhoon Muifa on the Shanghai world financial center", Int. J. Distrib. Sens. N., 2012, 1-11.
- ASCE/AWEA (2011), Recommended practice for compliance of large land-based wind turbine support structures, American Society of Civil Engineers/American Wind Energy Association; Reston, USA.
- Chen, X., Li, C. and Xu, J. (2015), "Failure investigation on a coastal wind farm damaged by super typhoon: A forensic engineering study", J. Wind Eng. Ind. Aerod., 147, 132-42. https://doi.org/10.1016/j.jweia.2015.10.007
- Chen, X. and Xu, J.Z. (2016), "Structural failure analysis of wind turbines impacted by super typhoon Usagi", Eng. Fail. Anal., 60, 391-404. https://doi.org/10.1016/j.engfailanal.2015.11.028
- Choi, E.C.C. (1978), "Characteristics of typhoons over the South China Sea", J. Wind Eng. Ind. Aerod., 3(4), 353-365. https://doi.org/10.1016/0167-6105(78)90038-7
- Chou, J.S. and Tu, W.T. (2011), "Failure analysis and risk management of a collapsed large wind turbine tower", Eng. Fail. Anal., 18, 295-313. https://doi.org/10.1016/j.engfailanal.2010.09.008
- CGC/GF 031:2013 (2013), Simulation design code for typhoon wind turbine, Beijing Jianheng technical specification; Beijing, China. (in Chinese)
- Dai, K.S., Bergot, A., Liang, C., Xiang, W.N. and Huang, Z.H. (2015), "Environmental issues associated with wind energy- A review", Renew. Energ., 75, 911-921. https://doi.org/10.1016/j.renene.2014.10.074
- Dai, K.S., Huang, Y.C., Gong, C.Q., Huang, Z. and Ren, X.S. (2015), "Rapid seismic analysis methodology for in-service wind turbine towers", Earthq. Eng. Eng. Vib., 14, 539-548. https://doi.org/10.1007/s11803-015-0043-0
- Field, C.B. (Ed.) (2012), Managing the Risks of Extreme Events and Disasters to Advance Climate Change Adaptation, Cambridge University Press, Cambridge, UK, and New York, NY, USA.
- GB/T 31519-2015 (2015), Wind turbine generator system under typhoon condition, Standards Press of China; Beijing, China. (in Chinese).
- GB 50009-2012 (2012), Load code for the design of building structures, Architecture and Building Press; Beijing, China. (in Chinese)
- GL (2005), Guidelines for certification of offshore wind turbines, Germanischer Lloyd; Hamburg, Germany.
- Gong, K. and Chen, X. (2015), "Improved modeling of equivalent static load on wind turbine towers", Wind Struct., 20(5), 609-622. https://doi.org/10.12989/was.2015.20.5.609
- Hansen, M.O.L. (2008), Aerodynamics of wind turbines, 3ndEd., Earthscan, London, UK.
- Han, T., McCann, G., Mucke, T.A. and Freudenreich, K. (2014), "How can a wind turbine survive in tropical cyclone?", Renew. Energ., 70, 3-10. https://doi.org/10.1016/j.renene.2014.02.014
- Hu, W.H, Thons, S., Rohrmann, R.G., Said, S. and Rucker, W. (2015), "Vibration-based structural health monitoring of a wind turbine system Part II: Environmental/operational effects on dynamic properties", Eng. Struct., 89, 273-90. https://doi.org/10.1016/j.engstruct.2014.12.035
- IEC 61400-1 (2005), Wind Turbines - Part 1: Design Requirements, Geneva, Switzerland.
- Ishihara, T., Yamaguchi, A., Takahara, K., Mekaru, T. and Matsuura, S. (2005), "An analysis of damaged wind turbines by typhoon maemi in 2003", Proceedings of the 6th Asia-Pacific Conference on Wind Engineering, Seoul, Korea, September, 12-14.
- Jaca, R.C., Godoy, L.A., Flores, F.G. and Croll, J.G.A. (2007), "A reduced stiffness approach for the buckling of open cylindrical tanks under wind loads", Thin Wall. Struct., 45, 727-736. https://doi.org/10.1016/j.tws.2007.07.001
- Jonkman, J.M. and Buhl, M.L. (2005), FAST User's Guide, National Renewable Energy Laboratory, Golden, USA.
- Ke, S.T., Yu, W., Wang, T.G., Zhao, B., and Ge, Y.J. (2016), "Wind loads and load-effects of large scale wind turbine tower with different halt positions of blade", Wind Struct., 23(6), 559-575. https://doi.org/10.12989/was.2016.23.6.559
- Karman, T. and Tsien, H.S. (1941), "The buckling of thin cylindrical shells under axial compression", J. Aeronaut. Sci., 8(8), 303-312. https://doi.org/10.2514/8.10722
- Lavassas, I., Nikolaidis, G., Zervas, P., Efthimiou, E., Doudoumis, I.N. and Baniotopoulos, C.C. (2003), "Analysis and design of the prototype of a steel 1-MW wind turbine tower", Eng. Struct., 25, 1097-1106. https://doi.org/10.1016/S0141-0296(03)00059-2
- Lee, K.S. and Bang, H.J. (2012), "A study on the prediction of lateral buckling load for wind turbine tower structures", Int. J. Precision Eng. Manufacturing, 13(10), 1829-1836. https://doi.org/10.1007/s12541-012-0240-y
- Li, Z.Q., Chen, S.J., Ma, H. and Feng, T. (2013), "Design defect of wind turbine operating in typhoon activity zone", Eng. Fail. Anal., 27, 165-172. https://doi.org/10.1016/j.engfailanal.2012.08.013
- Nuta, E., Christopoulos, C. and Packer, J.A. (2011), "Methodology for seismic risk assessment for tubular steel wind turbine towers: application to Canadian seismic environment", Can. J. Civil Eng., 38(3), 293-304. https://doi.org/10.1139/L11-002
- Patil, A., Jung, S. and Kwon, O.S. (2016), "Structural performance of a parked wind turbine tower subjected to strong ground motions", Eng. Struct., 120, 92-102. https://doi.org/10.1016/j.engstruct.2016.04.020
- Pircher, M., Lechner, B. and Trutnovsky, H. (2009), "Elastic buckling of thin-walled cylinders under wind loading: An experimental study", Int. J. Struct. Stab. Dynam., 9, 1-10. https://doi.org/10.1142/S0219455409002977
- Sadowski, A.J., Camara, A., Malaga-Chuquitaype, C. and Dai, K.S. (2016), "Seismic analysis of a tall metal wind turbine support tower with realistic geometric imperfections", Earthq. Eng. Struct. D., DOI: 10.1002/eqe.2785.
- Shiau, B.S. and Chen, Y.B. (2001), "In situ measurement of strong wind velocity spectra and wind characteristics at Keelung coastal area of Taiwan", Atmos. Res., 57, 171-185. https://doi.org/10.1016/S0169-8095(01)00069-2
- Spagnoli, A. and Montanari, L. (2013), "Along-wind simplified analysis of wind turbines through a coupled blade-tower model", Wind Struct., 17(6), 589-608. https://doi.org/10.12989/was.2013.17.6.589
- Somers, D.M. (2004), "The S816, S817, and S818 Airfoils", Research Report No. AF-1-11154-1 National Renewable Energy Laboratory, Colorado, Pennsylvania, USA.
- Sultania, A. and Manuel, L. (2016), "Loads and motions for a spar-supported floating offshore wind turbine", Wind Struct., 22(5), 525-541. https://doi.org/10.12989/was.2016.22.5.525
- Valamanesh, V. and Myers, A. (2014), "Aerodynamic damping and seismic response of horizontal axis wind turbine towers", J. Struct. Eng. - ASCE, 140, 1-9.
- Vickery, P.J., Wadhera, D., Powell, M.D. and Chen, Y. (2009), "A hurricane boundary layer and wind field model for use in engineering applications", J. Appl. Meteorol. Clim., 48, 381-405. https://doi.org/10.1175/2008JAMC1841.1
- Wang, Z., Zhao, Y., Li, F. and Jiang, J. (2013), "Extreme dynamic responses of MW-level wind turbine tower in the strong typhoon considering wind-rain loads", Math. Probl. Eng., 2013, 1-13.
- WWEA (2016), The world sets new wind installations record: 63,7 GW NEW CAPACITY IN 2015; World Wind Energy Association, Bonn, Germany. http://www.wwindea.org/the-world-sets-new-wind-installations-record-637-gw-new-capacity-in-2015/
- Zhang, Z., Li, J. and Zhuge, P. (2014), "Failure analysis of large-scale wind power structure under simulated typhoon", Math. Probl. Eng., 2014, 1-10.