Smart Structures and Systems

  • 제20권1호
  • /
  • Pages.11-22
  • /
  • 2017
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Temperature effect analysis of a long-span cable-stayed bridge based on extreme strain estimation

  • Yang, Xia (School of Civil Engineering, Hefei University of Technology) ;
  • Zhang, Jing (School of Civil Engineering, Hefei University of Technology) ;
  • Ren, Wei-Xin (School of Civil Engineering, Hefei University of Technology)
  • 투고 : 2016.12.28
  • 심사 : 2017.04.25
  • 발행 : 2017.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

The long-term effect of ambient temperature on bridge strain is an important and challenging problem. To investigate this issue, one year data of strain and ambient temperature of a long-span cable-stayed bridge is studied in this paper. The measured strain-time history is decomposed into two parts to obtain the strains due to vehicle load and temperature alone. A linear regression model between the temperature and the strain due to temperature is established. It is shown that for every $1^{\circ}C$ increase in temperature, the stress is increased by 0.148 MPa. Furthmore, the extreme value distributions of the strains due to vehicle load, temperature and the combination effect of them during the remaining service period are estimated by the average conditional exceedance rate approach. This approach avoids the problem of declustering of data to ensure independence. The estimated results demonstrate that the 95% quantile of the extreme strain distribution due to temperature is up to $1.488{\times}10^{-4}$ which is 2.38 times larger than that due to vehicle load. The study also indicates that the estimated extreme strain can reflect the long-term effect of temperature on bridge strain state, which has reference significance for the reliability estimation and safety assessment.

키워드

참고문헌

  1. Branco, F.A. and Mendes, P.A. (1993), "Thermal actions for concrete bridge design", J. Struct. Eng.-ASCE, 119(8), 2313-2331. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:8(2313)
  2. Catbas, F.N., Susoy, M. and Dan, M.F. (2008), "Structural health monitoring and reliability estimation: long span truss bridge application with environmental monitoring data", Eng. Struct., 30(9), 2347-2359. https://doi.org/10.1016/j.engstruct.2008.01.013
  3. Chen, G.D. and Wang, Z.C. (2012), "A signal decomposition theorem with Hilbert transform and its application to narrowband time series with closely spaced frequency components", Mech. Syst. Signal Pr., 28(2), 258-279. https://doi.org/10.1016/j.ymssp.2011.02.002
  4. Ding, J. and Chen, X.Z. (2014), "Assessment of methods for extreme value analysis of non-Gaussian wind effects with shortterm time history samples", Eng. Struct., 80, 75-88. https://doi.org/10.1016/j.engstruct.2014.08.041
  5. Duan, Y.F., Li, Y. and Xiang, Y.Q. (2010), "Correlation analysis of structural stress responses and temperature of a tied arch bridge using long-term health monitoring data", Proceedings of the 6th International Conference on Arch Bridges, Fuzhou, China, October.
  6. Gindy, M. and Nassif, H.H. (2006), "Comparison of traffic load models based on simulation and measured data", Proceedings of the Joint International Conference on Computing and Decision Making in Civil and Building Engineering, Montreal, Canada, June.
  7. Gong, K.M., Ding, J. and Chen, X.Z. (2014), "Estimation of longterm extreme response of operational and parked wind turbines: Validation and some new insights", Eng. Struct., 81, 135-147. https://doi.org/10.1016/j.engstruct.2014.09.039
  8. Gu, Y.M., Li, S.L., Li, H. and Guo, Z.M. (2014), "A novel Bayesian extreme value distribution model of vehicle loads incorporating de-correlated tail fitting: Theory and application to the Nanjing 3rd Yangtze River Bridge", Eng. Struct., 59(2), 386-392. https://doi.org/10.1016/j.engstruct.2013.10.029
  9. Han, H.T. (2006), "Analysis and investigation the upgrading and modifying project of Jiangyin Bridge structural health monitoring (SHM) system", M.S. Dissertation; Hohai University, Nanjing, China.
  10. Inger, L. (1989), "Very fast simulated reannealing", Math. Conut. Model., 12(8), 967-973. https://doi.org/10.1016/0895-7177(89)90202-1
  11. James, G. (2003), "Analysis of traffic load effects on railway bridges", Ph.D. Dissertation; Royal Institute of Technology, Sweden, Stockholm.
  12. Karpa, O. and Naess, A. (2013), "Extreme value statistics of wind speed data by the ACER method", J. Wind Eng. Ind. Aerod., 112(1), 1-10. https://doi.org/10.1016/j.jweia.2012.10.001
  13. Krkoska, L. and Moravcik, M. (2015), "The analysis of thermal effect on concrete box girder bridge", Procedia Eng., 111, 470-477. https://doi.org/10.1016/j.proeng.2015.07.118
  14. Kuang, K.S.C., Li, D. and Koh, C.G. (2016), "Acoustic emission source location and noise cancellation for crack detection in rail head", Smart Struct. Syst., 18(5), 1063-1085. https://doi.org/10.12989/sss.2016.18.5.1063
  15. Li, M., Ren, W.X., Yang, X., Liu, J.L. and Wang, N.B. (2014), "AMD-based Novelty Detection of Structure Using Dynamic Strains", Proceedings of the 13th International Symposium on Structural Engineering, Hefei, China, October.
  16. Li, Z.X., Wu, B.J. and Wang, Y. (2009), "Statistical analyses on multi-scale features of monitoring data from health monitoring system in long cable supported bridges", Procedia Eng., 1, 123-127. https://doi.org/10.1016/j.proeng.2009.06.029
  17. Naess, A. and Gaidai, O. (2009), "Estimation of extreme values from sampled time series", Struct. Saf., 31(4), 325-334. https://doi.org/10.1016/j.strusafe.2008.06.021
  18. Obrien, E.J., Enright, B. and Getachew, A. (2010), "Importance of the tail in truck weight modeling for bridge assessment", J. Bridge Eng., 15(2), 210-213. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000043
  19. Obrien, E.J., Schmidt, F., Hajializadeh, D., Zhou, X.Y., Enright, B., Caprani, C.C., Wilson, S. and Sheil, E. (2015), "A review of probabilistic methods of assessment of load effects", Struct. Saf., 53, 44-56. https://doi.org/10.1016/j.strusafe.2015.01.002
  20. Saetta, A., Scotta, R. and Vitaliani, R. (1995), "Stress analysis of concrete structure subjected to variable thermal loads", J. Struct. Eng.-ASCE, 121(3), 446-457. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:3(446)
  21. Shi, D.J. (2006), Practical extremum statistical method, Science and Technology Press, Tianjin, China.
  22. Wang, Z.C. and Chen, G.D. (2013), "Analytical mode decomposition of a time series with overlapping and rapidly time-varying frequencies with Hilbert transform", Smart Mater. Struct., 22(9), 1-15
  23. Wang, J., Katafygiotis. L.S. and Feng, Z.Q. (2016), "An efficient simulation method for the first excursion problem of linear structures subjected to stochastic wind loads", Comput. Struct., 166(1), 75-84. https://doi.org/10.1016/j.compstruc.2016.01.007
  24. Wong, K.Y. (2004), "Instrumentation and health monitoring of cable-supported bridges", Struct. Control Health Monit., 11(2), 91-124. https://doi.org/10.1002/stc.33
  25. Wu, B.J., LI, Z.X., Chan, Tommy H.T. and Wang, Y. (2014), "Multiscale features and information extraction of online strain for long-span bridges", Smart Struct. Syst., 14(4), 679-697 https://doi.org/10.12989/sss.2014.14.4.679
  26. Xia, Y.X. and Ni, Y.Q. (2016), "Extrapolation of extreme traffic on bridges based on long-term SHM data", Smart Struct. Syst., 17(6), 995-1015. https://doi.org/10.12989/sss.2016.17.6.995
  27. Yan, W.J. and Ren, W.X. (2016), "Circlularly-symmetric complex normal ratio distribution for scalar transmissibility functions, Part II: Probabilistic model and validation", Mech. Syst. Signal Pr., 80(1),78-98. https://doi.org/10.1016/j.ymssp.2016.02.068