DOI QR코드

DOI QR Code

Concrete-filled rectangular hollow section X joint with Perfobond Leister rib structural performance study: Ultimate and fatigue experimental Investigation

  • 투고 : 2016.11.24
  • 심사 : 2017.04.26
  • 발행 : 2017.07.20

초록

This paper presents a series of ultimate and fatigue experimental investigation on concrete-filled rectangular hollow section (CRHS) X joints with Perfobond Leister rib (PBR) under tension. A total of 15 specimens were fabricated, in which 12 specimens were tested under ultimate tension and 3 specimens were investigated in fatigue test. Different parameters including PBR stiffening, brace-to-chord ratio (${\beta}$) and inclined angle (${\theta}$) were considered in the test. Each joint was tested to failure under tension load. Obtained from test result, PBR was found to improve the tension strength and fatigue durability of CRHS joint substantially. Concrete dowel consisted by PBR and concrete inside the chord stiffened the joint, which leaded to a combination failure mode of punching shear and chord plastification of CRHS joint under tension. Finite element analysis validated the compound failure mode. Stress concentration on typical spot of CRHS joint was mitigated by PBR which was observed from fatigue test. Initial fatigue crack presented in CRHS joint with PBR also differentiated with the counterpart without PBR.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. ABAQUS (2012), Abaqus user's manual; Version 6.12, Dassault Systems.
  2. Ahn, J.H., Lee, C.G., Won, J.H. and Kim, S.H. (2010), "Shear resistance of the perfobond-rib shear connector depending on concrete strength and rib arrangement", J. Constr. Steel Res., 66(10), 1295-1307. https://doi.org/10.1016/j.jcsr.2010.04.008
  3. Baik, B., Yamada, K. and Ishikawa, T. (2011), "Fatigue crack propagation analysis for welded joint subjected to bending", Int. J. Fatigue, 33(5), 746-758. https://doi.org/10.1016/j.ijfatigue.2010.12.002
  4. Candido-Martins, J.P.S., Costa-Neves, L.F. and Vellasco, P.C.G.D.S. (2010), "Experimental evaluation of the structural response of perfobond shear connectors", Eng. Struct., 32(8), 1976-1985. https://doi.org/10.1016/j.engstruct.2010.02.031
  5. Cui, M.J. and Shao, Y.B. (2015), "Residual static strength of cracked concrete-filled circular steel tubular (CFCST) T-joint", Steel Compos. Struct., Int. J., 18(4), 1045-1062. https://doi.org/10.12989/scs.2015.18.4.1045
  6. Feldmann, M., Pak, D., Kopp, M., Schillo, N., Hegger, J. and Gallwoszus, J. (2015), "Design of composite dowels as shear connectors according to the German technical approval", In: Economical Bridge Solutions based on Innovative Composite Dowels and Integrated Abutments, pp. 57-71.
  7. Gallwoszus, J. and Classen, M. (2015), "Ermudung von Verbunddubelleisten in UHPC unter zyklischer Pull-out-Beanspruchung", Bautechnik, 92(7), 509-521. [In German] https://doi.org/10.1002/bate.201500020
  8. Hanswille, G. (2011), "Composite bridges in Germany designed according to Eurocode 4-2", Proceedings of the 6th International Conference on Composite Construction in Steel and Concrete, Tabernash, CO, USA, July, pp. 391-405.
  9. Liu, Y., Xiong, Z., Luo, Y., Cheng, G., Liu, G. and Yang, J. (2015), "Double-composite rectangular truss bridge and its joint analysis", J. Traffic Transp. Eng. (English Ed.), 2(4), 249-257. https://doi.org/10.1016/j.jtte.2015.05.005
  10. Machacek, J. and Cudejko, M. (2009), "Longitudinal shear in composite steel and concrete trusses", Eng. Struct., 31(6), 1313-1320. https://doi.org/10.1016/j.engstruct.2008.07.009
  11. Packer, J.A. (1995), "Concrete-filled HSS connections", J. Struct. Eng., 121(3), 458-467. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:3(458)
  12. Packer, J.A., Zhao, X.L., Vegte, G.J.V.D. and Wardenier, J. (2010), "Current static design guidance for hollow-section joints", Struct. Build., 163(6), 361-373. https://doi.org/10.1680/stbu.2010.163.6.361
  13. Sakai, Y., Hosaka, T., Isoe, A., Ichikawa, A. and Mitsuki, K. (2004), "Experiments on concrete filled and reinforced tubular K-joints of truss girder", J. Constr. Steel Res., 60(3), 683-699. https://doi.org/10.1016/S0143-974X(03)00136-6
  14. Schumacher, A. and Nussbaumer, A. (2006), "Experimental study on the fatigue behaviour of welded tubular K-joints for bridges", Eng. Struct., 28(5), 745-755. https://doi.org/10.1016/j.engstruct.2005.10.003
  15. Schumacher, A., Borges, L.C. and Nussbaumer, A. (2009), "A critical examination of the size effect correction for welded steel tubular joints", Int. J. Fatigue, 31(8), 1422-1433. https://doi.org/10.1016/j.ijfatigue.2009.04.003
  16. Seidl, G., Stambuk, M., Lorenc, W., Kolakowski, T. and Petzek, E. (2013), "Wirtschaftliche Verbundbauweisen im Bruckenbau-Bauweisen mit Verbunddubelleisten", Stahlbau, 82(7), 510-521. [In German] https://doi.org/10.1002/stab.201310072
  17. Tue, N.V. and Kuchler, M. (2006), "Knotengestaltung hybrider Fachwerkkonstruktionen-Entwicklung neuartiger Tragwerkskonzepte unter Verwendung von Ultrahochleistungsbeton (UHFB)", Bautechnik, 83(5), 315-324. [In German] https://doi.org/10.1002/bate.200610026
  18. Vanwingerde, A.M. (1992), "The fatigue behaviour of T- and Xjoints made of square hollow sections", Ph.D. Dissertation; Delft University of Technology, Netherlands.
  19. Xiao, Z.G., Chen, T. and Zhao, X.L. (2012), "Fatigue strength evaluation of transverse fillet welded joints subjected to bending loads", Int. J. Fatigue, 38(38), 57-64. https://doi.org/10.1016/j.ijfatigue.2011.11.013
  20. Xiong, Z., Liu, Y., Zhang, N. and Song, S. (2014), "Structural performance of concrete-filled rectangular steel tubular joints with Perfobond Rib in bridges using damage model", ASCE Geotechnical Special Publication, 253, 46-53.
  21. Zheng, S., Liu, Y., Yoda, T. and Lin, W. (2016), "Shear behavior and analytical model of perfobond connectors", Steel Compos. Struct., Int. J., 20(1), 71-89. https://doi.org/10.12989/scs.2016.20.1.071

피인용 문헌

  1. Failure Modes and Resistance of Perforated Steel Rib Shear Connectors under Uplift Forces vol.2019, pp.None, 2019, https://doi.org/10.1155/2019/9041376
  2. Shear Performance Assessment of Sand-Coated GFRP Perforated Connectors Embedded in Concrete vol.12, pp.12, 2017, https://doi.org/10.3390/ma12121906
  3. Experimental and numerical analysis of the stress concentration factor for concrete-filled square hollow section Y-joints vol.23, pp.5, 2020, https://doi.org/10.1177/1369433219884462
  4. Flexural behavior of concrete-filled rectangular steel tubular (CFRST) trusses vol.36, pp.None, 2022, https://doi.org/10.1016/j.istruc.2021.11.049