Steel and Composite Structures

  • 제24권4호
  • /
  • Pages.391-397
  • /
  • 2017
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Feasibility study of bonding state detection of explosive composite structure based on nonlinear output frequency response functions

  • Si, Yue (School of Mechanical Engineering, Xi'an Jiaotong University) ;
  • Zhang, Zhou-Suo (School of Mechanical Engineering, Xi'an Jiaotong University) ;
  • Wang, Hong-fang (School of Mechanical Engineering, Xi'an Jiaotong University) ;
  • Yuan, Fei-Chen (School of Mechanical Engineering, Xi'an Jiaotong University)
  • 투고 : 2016.08.22
  • 심사 : 2017.04.14
  • 발행 : 2017.07.20
⟨ 이전 논문 다음 논문 ⟩

초록

With the increasing application of explosive composite structure in many engineering fields, its interface bonding state detection is more and more significant to avoid catastrophic accidents. However, this task still faces challenges due to the complexity of the bonding interface. In this paper, the concept of nonlinear output frequency response functions (NOFRFs) is introduced to detect the bonding state of explosive composite structure. The NOFRFs can describe the nonlinear characteristics of nonlinear vibrating system. Because of the presence of the bonding interface, explosive composite structure itself is a nonlinear system; when bonding interface of the structure is damaged, its dynamic characteristics show enhanced nonlinear characteristic. Therefore, the NOFRFs-based detection index is proposed as indicator to detect the bonding state of explosive composite pipes. The experimental results verify the effectiveness of the detection approach.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Acarer, M. and Demir, B. (2008), "An investigation of mechanical and metallurgical properties of explosive welded aluminum-dual phase steel", Mater. Lett., 62(25), 4158-4160. https://doi.org/10.1016/j.matlet.2008.05.060
  2. Billings, S.A. and Yusof, M.I. (2007), "Decomposition of generalized frequency response functions for nonlinear systems using symbolic computation", Int. J. Control, 65(4), 589-618. https://doi.org/10.1080/00207179608921712
  3. Boaghe, O.M., Billings, S.A., Li, L.M., Fleming, P.J. and Liu, J. (2002), "Time and frequency domain identification and analysis of a gasturbine engine", Control Eng. Practice, 10(12), 1347-1356. https://doi.org/10.1016/S0967-0661(02)00100-4
  4. Chatterjee, A. (2010), "Structural damage assessment in a cantilever beam with a breathing crack using higher order frequency response functions", J. Sound Vib., 329(16), 3325-3334. https://doi.org/10.1016/j.jsv.2010.02.026
  5. Durgutlu, A., Gulenc, B. and Findik, F. (2005), "Examination of copper/stainless steel joints formed by explosive composite", Mater. Des., 26(6), 497-507. https://doi.org/10.1016/j.matdes.2004.07.021
  6. Findik, F. (2011), "Recent developments in explosive welding", Mater. Des., 32(3), 1081-1093. https://doi.org/10.1016/j.matdes.2010.10.017
  7. Kaya, Y. and Kahraman, N. (2013), "An investigation into the explosive composite/cladding of Grade A ship steel/AISI 316L austenitic stainless steel", Mater. Des., 52, 367-372. https://doi.org/10.1016/j.matdes.2013.05.033
  8. Kahraman, N., Gulenc, B. and Findik, F. (2005), "Joining of titanium/stainless steel by explosive composite and effect on interface", J. Mater. Process. Technol., 169(2), 127-133. https://doi.org/10.1016/j.jmatprotec.2005.06.045
  9. Lang, Z.Q. and Billings, S.A. (2007a), "Energy transfer properties of non-linear systems in the frequency domain", Int. J. Control, 78(5), 345-362. https://doi.org/10.1080/00207170500095759
  10. Lang, Z.Q. and Billings, S.A. (2007b), "Output frequency characteristics of nonlinear systems", Int. J. Control, 64(6), 1049-1067. https://doi.org/10.1080/00207179608921674
  11. Peng, Z.K., Lang, Z.Q. and Billings, S.A. (2007), "Crack detection using nonlinear output frequency response functions", J. Sound Vib., 301(3-5), 777-788. https://doi.org/10.1016/j.jsv.2006.10.039
  12. Peng, Z.K., Lang, Z.Q., Wolters, C., Billings, S.A. and Worden, K. (2011), "Feasibility study of structural damage detection using NARMAX modelling and Nonlinear Output Frequency Response Function based analysis", Mech. Syst. Signal Process., 25(3), 1045-1061. https://doi.org/10.1016/j.ymssp.2010.09.014
  13. Rajani, H.Z. and Mousavi, S.A. (2012), "The effect of explosive welding parameters on metallurgical and mechanical interfacial features of Inconel 625/plain carbon steel bimetal plate", Mater. Sci. Eng.: A, 556, 454-464. https://doi.org/10.1016/j.msea.2012.07.012
  14. Rugh, W.J. (1981), Nonlinear System Theory - The Volterra/Wiener Approach, The Johns Hopkins University Press, Baltimore, MD, USA.
  15. Si, Y., Zhang, Z., Liu, Q., Cheng, W. and Yuan, F. (2014), "Detecting the bonding state of explosive welding structures based on EEMD and sensitive IMF time entropy", Smart Mater. Struct., 23(7), 075010. https://doi.org/10.1088/0964-1726/23/7/075010
  16. Si, Y., Zhang, Z., Cheng, W. and Yuan, F. (2015), "State detection of explosive welding structure by dual-tree complex wavelet transform based permutation entropy", Steel Compos. Struct., Int. J., 19(3), 569-583. https://doi.org/10.12989/scs.2015.19.3.569
  17. Surace, C., Romualdo, R. and David, S. (2011), "Detecting nonlinear behavior using Volterra series to assess damage in beam-like structures", J. Theor. Appl. Mech., 49(3), 905-926.
  18. Xia, H.-b., Wang, S.-g. and Ben, H.-f. (2014), "Microstructure and mechanical properties of Ti/Al explosive cladding", Mater. Des., 56, 1014-1019. https://doi.org/10.1016/j.matdes.2013.12.012
  19. Xia, X., Zhou, J., Li, C. and Zhu, W. (2015), "A novel method for fault diagnosis of hydro generator based on NOFRFs", Int. J. Electr. Power Energy Syst., 71, 60-67. https://doi.org/10.1016/j.ijepes.2015.02.022

피인용 문헌

  1. A novel method for bonding state detection of explosive clad structure based on the Hilbert envelop energy ratio of mono-model signals vol.27, pp.11, 2018, https://doi.org/10.1088/1361-665X/aae124