Geomechanics and Engineering

  • 제13권1호
  • /
  • Pages.141-159
  • /
  • 2017
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of hardfacing on wear reduction of pick cutters under mixed rock conditions

  • Chang, Soo-Ho (Geotechnical Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology) ;
  • Lee, Chulho (Geotechnical Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology) ;
  • Kang, Tae-Ho (Geotechnical Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology) ;
  • Ha, Taewook (Department of Mining and Processing Technology, Korea Resources Corporation) ;
  • Choi, Soon-Wook (Geotechnical Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology)
  • 투고 : 2016.06.29
  • 심사 : 2017.02.20
  • 발행 : 2017.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

A pick cutter is a rock-cutting tool used in partial-face excavation machines such as roadheaders, and its quality is a key element influencing the excavation performance and efficiency of such machines. In this study, pick cutters with hardfacing deposits applied to a tungsten carbide insert were made with aim of increasing their durability and wear resistance. They were field-tested by being installed in a roadheader and compared with conventional pick cutters under the same excavation conditions for 24 hours. The hardfaced pick cutters showed much smaller weight loss after excavation, and therefore better excavation performance, than the conventional pick cutters. In particular, the damage to and detachment (loss) of tungsten carbide inserts was minimal in the hardfaced pick cutters. A detailed inspection using scanning electron microscope-energy dispersive X-ray spectrometry and three-dimensional X-ray computed tomography scanning revealed no macro- or micro-cracks in the pick cutters. The reason for the absence of cracks may be that the heads of pick cutters are mechanically worn after the tungsten carbide inserts have been worn and damaged. However, scanning revealed the presence of voids between tungsten carbide inserts and pick cutter heads. This discovery of voids indicates the need to improve production processes in order to guarantee a higher quality of pick cutters.

키워드

과제정보

연구 과제번호 : Development of Underground Excavation and Stabilization Technologies for the Expansion of Underground Space in Use

연구 과제 주관 기관 : Korea Institute of Civil Engineering and Building Technology

참고문헌

  1. Acchar, W., Gomes, U.U., Kaysser, W.A. and Goring, J. (1999), "Strength degradation of a tungsten carbide-cobalt composite at elevated temperatures", Mater. Character., 43(1), 27-32. https://doi.org/10.1016/S1044-5803(98)00056-4
  2. Agapito Associates (2007), Geotechnical Evaluation for the Definitive Feasibility Study Underground Mine Design; Agapito Associates, June.
  3. Agapito Associates (2012), Baja Mining Corporation - El Boleo Project M303 Mine Underground Guide Book; Agapito Associates, March.
  4. A lvarez, J.T., A lvarez, M.M. and Diez, R.R. (2003), "Experimental results of a low-power roadheader driving a gallery with different types of rock at the face", Tunn. Undergr. Space Technol., 18(4), 395-340. https://doi.org/10.1016/S0886-7798(03)00042-7
  5. Beres, L., Balogh, A. and Irmer, W. (2001), "Welding of martensitic creep-resistant steels", Welding Journal, 80(8), 191-s-195-s.
  6. Bilgin, N., Dincer, T., Copur, H. and Erdogan, M. (2004), "Some geological and geotechnical factors affecting the performance of a roadheader in an inclined tunnel", Tunn. Undergr. Space Technol., 19(6), 629-636. https://doi.org/10.1016/j.tust.2004.04.004
  7. Bilgin, N., Demircin, M.A., Copur, H., Balci, C., Tuncdemir, H. and Akcin, N. (2006), "Dominant rock properties affecting the performance of conical picks and the comparison of some experimental and theoretical results", Int. J. Rock Mech. Mining Sci., 43(1), 139-156. https://doi.org/10.1016/j.ijrmms.2005.04.009
  8. Bilgin, N., Copur, H. and Balci, C. (2014), Mechanical Excavation in Mining and Civil Industries, CRC Press, Boca Raton, CA, USA.
  9. Cha, S.I., Lee, K.H., Ryu, H.J. and Hong, S.H. (2008), "Effect of size and location of spherical pores on transverse rupture strength of WC-Co cemented carbides", Mater. Sci. Eng. A, 486(1), 404-408. https://doi.org/10.1016/j.msea.2007.09.023
  10. Chatterjee, S. and Pal, T.K. (2003), "Wear behaviour of hardfacing deposits on cast iron", Wear, 255(1-6), 417-425. https://doi.org/10.1016/S0043-1648(03)00101-7
  11. Comakli, R. Kahraman, S. and Balci, C. (2014), "Performance prediction of roadheaders in metallic ore excavation", Tunn. Undergr. Space Technol., 40, 38-45. https://doi.org/10.1016/j.tust.2013.09.009
  12. Ebrahimabadi, A., Azimipour, M. and Bahreini, A. (2015), "Prediction of roadheaders' performance using artificial neural network approaches (MLP and KOSFM)", J. Rock Mech. Geotech. Eng., 7(5), 573-583. https://doi.org/10.1016/j.jrmge.2015.06.008
  13. Eyyuboglu, E.M. and Bolukbasi, N. (2005), "Effects of circumferential pick spacing on boom type roadheader cutting head performance", Tunn. Undergr. Space Technol., 20(5), 418-425. https://doi.org/10.1016/j.tust.2005.02.002
  14. Gregory, E.N. (1978), "Hardfacing", Tribology International, 11(2), 129-134. https://doi.org/10.1016/0301-679X(78)90143-3
  15. Gualco, A., Svoboda, H.G. and Surian, E.S. (2016), "Study of abrasive wear resistance of Fe-based nanostructured hardfacing", Wear, 360-361, 14-20. https://doi.org/10.1016/j.wear.2016.04.011
  16. Hekimoglu, O.Z. and Fowell, R.J. (1991), "Theoretical and practical aspects of circumferential pick spacing on boom tunnelling machine cutting heads", Mining Sci. Technol., 13(3), 257-270. https://doi.org/10.1016/0167-9031(91)90397-U
  17. Kim, E., Rostami, J. and Swope, C. (2012a), "Full scale linear cutting experiment to examine conical bit rotation", J. Mining Sci., 48(5), 882-895. https://doi.org/10.1134/S1062739148050139
  18. Kim, E., Rostami, J., Swope, C. and Colvin, S. (2012b), "Study of conical bit rotation using full-scale rotary cutting experiments", J. Mining Sci., 48(4), 717-731. https://doi.org/10.1134/S106273914804017X
  19. Kim, K.Y., Yun, T.S., Choo, J., Kang, D.H. and Shin, H.S. (2012c), "Determination of air-void parameters of hardened cement-based materials using X-ray computed tomography", Constr. Build. Mater., 37, 93-101. https://doi.org/10.1016/j.conbuildmat.2012.07.012
  20. Liu, S., Liu, Z., Cui, X. and Jiang, H. (2014), "Rock breaking of conical cutter with assistance of front and rear water jet", Tunn. Undergr. Space Technol., 42, 78-86. https://doi.org/10.1016/j.tust.2014.02.002
  21. Liu, S., Liu, X., Cai, W. and Ji, H. (2016a), "Dynamic performance of self-controlling hydro-pick cutting rock", Int. J. Rock Mech. Mining Sci., 83, 14-23. https://doi.org/10.1016/j.ijrmms.2016.01.004
  22. Liu, J., Yang, S., Xia, W., Jiang, X. and Gui, C. (2016b), "Microstructure and wear resistance performance of Cu-Ni-Mn alloy based hardfacing coatings reinforced by WC particles", Journal of Alloys and Compounds, 654, 63-70. https://doi.org/10.1016/j.jallcom.2015.09.130
  23. Martin, J.A. and Fowell, R.J. (1997), "Factors governing the onset of severe drag tool wear in rock cutting", Int. J. Rock Mech. Min. Sci., 34(1), 59-69. https://doi.org/10.1016/S1365-1609(97)80033-0
  24. Muro, T. and Fukagawa, R. (1985), "Wear of a rock excavating tip and its counterplan due to hardfacing", Proceedings of JSCE, Tokyo, Japan, December, 364(III-4), 87-95. [In Japanese]
  25. Muthuraja, A. and Senthilvelan, S. (2015), "Abrasive wear performance of tungsten carbide based selflubricant cutting tool material", Int. J. Refractory Metals Hard Mater., 51, 91-101. https://doi.org/10.1016/j.ijrmhm.2015.03.007
  26. Sandvik (2005), Cemented Carbide - Sandvik new development and applications, Ref. no H-9116 ENG; Sandvik Group.
  27. Shao, W., Li, X., Sun, Y. and Huang, H. (2017), "Parametric study of rock cutting with SMART* CUT picks", Tunn. Undergr. Space Technol., 61, 131-144.
  28. Svensson, L.-E., Gretoft, B., Ulander, B. and Bhadeshia, H.K.D.H. (1986), "Fe-Cr-C hardfacing alloys for high-temperature application", J. Mater. Sci., 21(3), 1015-1019. https://doi.org/10.1007/BF01117388
  29. Tatiya, R.R. (2013), Surface and Underground Excavations - Methods, Techniques and Equipment, (2nd Edition), CRC Press, London, UK.
  30. Yang, J., Hou, X., Zhang, P., Zhou, Y., Yang, Y., Ren X. and Yang, Q. (2016), "Mechanical properties of the hypereutectoid Fe-Cr-C hardfacing coatings with different nano-$Y_2O_3$ additives and the mechanism analysis", Mater. Sci. Eng. A, 655, 346-354. https://doi.org/10.1016/j.msea.2015.12.087
  31. Yilmaz, N.G., Yurdakul, M. and Goktan, R.M. (2007), "Prediction of radial bit cutting force in high-strength rocks using multiple linear regression analysis", Int. J. Rock Mech. Mining Sci., 44(6), 962-970. https://doi.org/10.1016/j.ijrmms.2007.02.005