Coupled systems mechanics

  • 제6권2호
  • /
  • Pages.175-187
  • /
  • 2017
  • /
  • 2234-2184(pISSN)
  • /
  • 2234-2192(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Vibration reduction of a pipe conveying fluid using the semi-active electromagnetic damper

  • Kavianipour, Omid (Department of Mechanical Engineering, Damavand Branch, Islamic Azad University)
  • 투고 : 2017.02.09
  • 심사 : 2017.04.17
  • 발행 : 2017.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper deals with a uniform cantilever Euler-Bernoulli beam subjected to follower and transversal force at its free end as a model for a pipe conveying fluid under electromagnetic damper force. The electromagnetic damper is composed of a permanent-magnet DC motor, a ball screw and a nut. The main objective of the current work is to reduce the pipe vibration resulting from the fluid velocity and allow it to transform into electric energy. To pursue this goal, the stability and vibration of the beam model was studied using Ritz and Newmark methods. It was observed that increasing the fluid velocity results in a decrease in the motion of the free end of the pipe. The results of simulation showed that the designed semiactive electromagnetic damper controlled by on-off damping control strategy decreased the vibration amplitude of the pipe about 5.9% and regenerated energy nearly 1.9 (mJ/s). It was also revealed that the designed semi-active electromagnetic damper has better performance and more energy regeneration than the passive electromagnetic damper.

키워드

과제정보

연구 과제 주관 기관 : Islamic Azad University

참고문헌

  1. Al-Hilli, A.H. and Ntayeesh, T.J. (2015), "Critical velocity of fluid-conveying pipes resting on winkler foundation with general boundary conditions", J. Multidiscipl. Eng. Sci. Technol., 2(8), 2099-2106.
  2. Caddemi, S., Caliò, I. and Cannizzaro, F. (2014), "Flutter and divergence instability of the multi-cracked cantilever beam-column", J. Sound Vibr., 333(6), 1718-1733. https://doi.org/10.1016/j.jsv.2013.10.039
  3. Chellapilla, K.R. and Simha, H.S. (2008), "Vibrations of fluid-conveying pipes resting on two-parameter foundation", Open Acoust. J., 1(1), 24-33. https://doi.org/10.2174/1874837600801010024
  4. Chen, S., He, R. and Lu, S. (2006), "Operation theory and structure evaluation of reclaiming energy suspension", Trans. Chin. Soc. Agricult. Mach., 37(5), 5-9.
  5. Chen, S., He, R. and Lu, S. (2007), "New reclaiming energy suspension and its working principle", Chin. J. Mech. Eng., 13(11), 177-182.
  6. Craig, J.R.R. and Kurdila, A.J. (2006), Fundamentals of Structural Dynamics, John Wiley & Sons, Inc., New Jersey, U.S.A.
  7. Djondjorov, P.A. and Vassilev, V.M. (2008), "On the dynamic stability of a cantilever under tangential follower force according to Timoshenko beam theory", J. Sound Vibr., 311(3-5), 1431-1437. https://doi.org/10.1016/j.jsv.2007.10.005
  8. Faal, R.T. and Derakhshan, D. (2011), "Flow-induced vibration of pipeline on elastic support", Proc. Eng., 14, 2986-2993. https://doi.org/10.1016/j.proeng.2011.07.376
  9. Gongfa, L., Wentao, X., Guozhang, J. and Jia, L. (2014), "Finite element analysis of fluid conveying pipeline of nonlinear vibration response", Comput. Model. New Technol., 18(4), 37-41.
  10. He, R., Chen, S. and Lu, S. (2005), A Permanent Magnetic Energy Regenerative Suspension, ZL 200520072480.9, China.
  11. Hodges, D.H. and Pierce, G.A. (2002), Introduction to Structural Dynamics and Aeroelasticity, The Press Syndicate of the University of Cambridge, Cambridge, U.K.
  12. Irani, S. and Kavianipour, O. (2009), "Effects of a flexible joint on instability of a free-free jointed bipartite beam under the follower and transversal forces", J. Zhej. Univ. Sci. A, 10(9), 1252-1262. https://doi.org/10.1631/jzus.A0820621
  13. Jweeg, M.J. and Ntayeesh, T.J. (2015), "Dynamic analysis of pipes conveying fluid using analytical, numerical and experimental verification with the aid of smart materials", J. Sci. Res., 4(12), 1594-1605.
  14. Jweeg, M.J. and Ntayeesh, T.J. (2016), "Determination of critical buckling velocities of pipes conveying fluid rested on different supports conditions", J. Comput. Appl., 134(10), 34-42.
  15. Kavianipour, O. and Sadati, S.H. (2009), "Effects of damping on the linear stability of a free-free beam subjected to follower and transversal forces", Struct. Eng. Mech., 33(6), 709-724. https://doi.org/10.12989/sem.2009.33.6.709
  16. Kavianipour, O., Khoshnood, A.M. and Sadati, S.H. (2013), "Reduction of the actuator oscillations in the flying vehicle under a follower force", Struct. Eng. Mech., 47(2), 149-166. https://doi.org/10.12989/sem.2013.47.2.149
  17. Kawamoto, Y., Suda, Y., Inoue, H. and Kondo, T. (2007), "Modeling of electromagnetic damper for automobile suspension", J. Syst. Des. Dyn., 1(3), 524-535. https://doi.org/10.1299/jsdd.1.524
  18. Kesimli, A., Bagdatli, S.M. and Canakci, S. (2016), "Free vibrations of fluid conveying pipe with intermediate support", Res. Eng. Struct. Mater., 2(2), 75-87.
  19. Kim, K.H. and Kim, J.H. (2000), "Effect of crack on the dynamic stability of a free-free beam subjected to a follower force", J. Sound Vibr., 233(1), 119-135. https://doi.org/10.1006/jsvi.1999.2793
  20. Kokare, A.B. and Paward, P.M. (2015), "Vibration characteristics of pipe conveying fluid", J. Sci. Eng. Technol. Res., 4(51), 10951-10954.
  21. Liu, Y. (2004), "Semi-active damping control for vibration isolation of base disturbances", Ph.D. Dissertation, University of Southampton, Southampton, U.K.
  22. Martins, I., Esteves, J., Marques, G.D. and Pina Da Silva, F. (2006), "Permanent-magnets linear actuators applicability in automobile active suspensions", IEEE Trans. Vehicul. Technol., 55(1), 86-94. https://doi.org/10.1109/TVT.2005.861167
  23. Meirovitch, L. (1997), Principles and Techniques of Vibrations, Prentice-Hall International, Inc., New Jersey, U.S.A.
  24. Mohamed, J.A., Mohammed, Q. and Hatem, R. (2016), "Stability analysis of pipe conveying fluid stiffened by linear stiffness", J. Curr. Eng. Technol., 6(5), 1764-1769.
  25. Montazeri, G.M. and Kavianipour, O. (2012), "Investigation of the passive electromagnetic damper", Acta Mech., 223(12), 2633-2646. https://doi.org/10.1007/s00707-012-0735-8
  26. Montazeri, G.M. and Kavianipour, O. (2014a), "Investigation of the active electromagnetic suspension system considering hybrid control strategy", J. Mech. Eng. Sci., 228(10), 1658-1669. https://doi.org/10.1177/0954406213511430
  27. Montazeri, G.M. and Kavianipour, O. (2014b), "Investigation of the semi-active electromagnetic damper", Smart Struct. Syst., 13(3), 419-434. https://doi.org/10.12989/sss.2014.13.3.419
  28. Nakano, K. and Suda, Y. (2004), "Combined type self-powered active vibration control of truck cabins", Vehic. Syst. Dyn., 41(6), 449-473. https://doi.org/10.1080/00423110512331383858
  29. Nakano, K., Suda, Y. and Nakadai, S. (2003), "Self-powered active vibration control using a single electric actuator", J. Sound Vibr., 260(2), 213-235. https://doi.org/10.1016/S0022-460X(02)00980-X
  30. Nakano, K., Suda, Y., Nakadai, S. and Koike, Y. (2001), "Anti-rolling system for ships with self-powered active control", JSME J. Ser. C, 44(3), 587-593. https://doi.org/10.1299/jsmec.44.587
  31. Raminnea, M., Biglari, H. and Vakili Tahami, F. (2016), "Nonlinear higher order Reddy theory for temperature-dependent vibration and instability of embedded functionally graded pipes conveying fluidnanoparticle mixture", Struct. Eng. Mech., 59(1), 153-186. https://doi.org/10.12989/sem.2016.59.1.153
  32. Ryu, S.U. and Sugiyama, Y. (2003), "Computational dynamics approach to the effect of damping on stability of a cantilevered column subjected to a follower force", Comput. Struct., 81(4), 265-271. https://doi.org/10.1016/S0045-7949(02)00436-4
  33. Shvartsman, B.S. (2007), "Large deflections of a cantilever beam subjected to a follower force", J. Sound Vibr., 304(3-5), 969-973. https://doi.org/10.1016/j.jsv.2007.03.010
  34. Sohrabian, M., Ahmadian, H. and Fathi, R. (2016), "Flutter instability of Timoshenko cantilever beam carrying concentrated mass on various locations", Lat. Am. J. Sol. Struct., 13(16), 3005-3021. https://doi.org/10.1590/1679-78252946
  35. Suda, Y. and Shiba, T. (1996), "A new hybrid suspension system with active control and energy regeneration", Vehic. Syst. Dyn., 25(S1), 641-654. https://doi.org/10.1080/00423119608969226
  36. Suda, Y., Suematsu, K., Nakano, K. and Shiba, T. (2000), "Study on electromagnetic suspension for automobiles-simulation and experiments of performance", Proceedings of the 5th International Symposium on Advanced Vehicle Control, Michigan, U.S.A., August.
  37. Wang, Q. (2004), "A comprehensive stability analysis of a cracked beam subjected to follower compression", J. Sol. Struct., 41(18), 4875-4888. https://doi.org/10.1016/j.ijsolstr.2004.04.037
  38. Wen, L., Gongmin, L. and Haoran, W. (2016), "Dynamic analysis of pipes conveying fluid by transfer matrix method", Proceedings of the 23rd International Congress on Sound and Vibration, Athens, Greece, July.
  39. Wu, Z. and Cao, Y. (2007), "Brief introduction to structure and principle of electromagnetic shock absorber", Mot. Technol., 8, 56-59.
  40. Yi-Min, H., Yong-Shou, L., Bao-Hui, L., Yan-Jiang, L. and Zhu-Feng, L. (2010), "Natural frequency analysis of fluid conveying pipeline with different boundary conditions", Nucl. Eng. Des., 240(3), 461-467. https://doi.org/10.1016/j.nucengdes.2009.11.038
  41. Zamani Nouri, A. (2017), "Mathematical modeling of concrete pipes reinforced with CNTs conveying fluid for vibration and stability analyses", Comput. Concrete, 19(3), 325-331. https://doi.org/10.12989/cac.2017.19.3.325
  42. Zhang, Y., Huang, K., Yu, F., Gu, Y. and Li, D. (2007), "Experimental verification of energy-regenerative feasibility for an automotive electrical suspension system", Vehic. Electr. Safety, 1-5.
  43. Zhang, Y., Yu, F. and Huang, K. (2009), "Permanent-magnet DC motor actuators application in automotive energy-regenerative active suspension", SAE Int., 1-6.
  44. Zhang, Y., Yu, F., Gu, Y. and Zheng, X. (2008), "Isolation and energy regenerative performance experimental verification of automotive electrical suspension", J. Shanghai Jiaotong Univ., 42(6), 874-877.