DOI QR코드

DOI QR Code

Stress wave propagation in clearance joints based on characteristics method

  • Tang, Ya-Qiong (School of Mechano-Electronic Engineering, Xidian University) ;
  • Li, Tuan-Jie (School of Mechano-Electronic Engineering, Xidian University) ;
  • Chen, Cong-Cong (School of Mechano-Electronic Engineering, Xidian University) ;
  • Wang, Zuo-Wei (School of Mechano-Electronic Engineering, Xidian University)
  • 투고 : 2016.05.23
  • 심사 : 2017.06.05
  • 발행 : 2017.06.25

초록

In this paper, a stress wave model is established to describe the three states (separate, contact and impact) of clearance joints. Based on this stress wave model, the propagation characteristics of stress wave generated in clearance joints is revealed. First, the stress wave model of clearance joints is established based on the viscoelastic theory. Then, the reflection and transmission characteristics of stress wave with different boundaries are studied, and the propagation of stress wave in viscoelastic rods is described by the characteristics method. Finally, the stress wave propagation in clearance joints with three states is analyzed to validate the proposed model and method. The results show the clearance sizes, initial axial speeds and material parameters have important influences on the stress wave propagation, and the new stress waves will generate when the clearance joint in contact and impact states, and there exist some high stress region near contact area of clearance joints when the incident waves are superposed with reflection waves, which may speed up the damage of joints.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Bauchau, O.A. and Rodriguez, J. (2002), "Modeling of joints with clearance in flexible multibody systems", Int. J. Solid. Struct., 39(1), 41-46. https://doi.org/10.1016/S0020-7683(01)00186-X
  2. Butt, H.S.U., Xue, P., Jiang, T.Z. and Wang, B. (2014), "Parametric identification for material of viscoelastic SHPB from wave propagation data incorporating geometrical effects", Int. J. Mech. Sci., 91, 46-54.
  3. Chiffoleau, G.J.A., Steinberg, T.A. and Veidt, M. (2003), "Reflection of structural waves at a solid/liquid interface", Ultrasonics, 41(5), 347-356. https://doi.org/10.1016/S0041-624X(03)00122-7
  4. Deck, J.F. and Dubowsky, S. (1994), "On the limitations of predictions of the dynamic response of machines with clearance connections", J. Mech. Des., 116(1), 833-841. https://doi.org/10.1115/1.2919457
  5. Dubowsky, S. and Freudenatein, F. (1971), "Dynamic analysis of mechanical systems with clearances", ASME J. Eng. Indust., 93(1), 305-309. https://doi.org/10.1115/1.3427895
  6. Dubowsky, S. and Gardner, T.N. (1977), "Design and analysis of multilink of flexible mechanisms with multiple clearance connections", J. Eng. Indust., 99(1), 88-96. https://doi.org/10.1115/1.3439171
  7. Dubowsky, S., Norris, M. and Aloni, E. (1984), "An analytical and experimental study of the prediction of impacts in planar mechanical system with clearance", J. Mech. Des., 106(4), 444-451.
  8. Keskinen, E., Kuokkala, V.T. and Vuoristo, T. (2007), "Multi-body wave analysis of axially elastic rod systems", Proc. Inst. Mech. Engineers Part K J. Multi-body Dyn., 221(3), 417-428.
  9. Koshy, C.S., Flores, P. and Lankarani, H.M. (2013), "Study of the effect of contact force model on the dynamic response of mechanical systems with dry clearance joints: computational and experimental approaches", Nonlinear Dyn., 73(1-2), 325-338. https://doi.org/10.1007/s11071-013-0787-x
  10. Mahfouz, A. and Badrakhan, F. (1990), "Chaotic behavior of some piecewise-linear systems part II: systems with clearance", J. Sound Vib., 143(2), 289-328. https://doi.org/10.1016/0022-460X(90)90955-Y
  11. Muvengei, O., Kihiu, J. and Ikua, B, (2013), "Dynamic analysis of planar rigid-body mechanical systems with two-clearance revolute joints", Nonlinear Dyn., 73(1-2), 259-273. https://doi.org/10.1007/s11071-013-0782-2
  12. Senevirate, L.D., Earles, S.W.E. and Fenner, D.N. (1996), "Analysis of four -bar mechanism with a radially compliant clearance joint", J. Mech. Eng. Sci., 210(3), 210-215.
  13. Tomihiko, Y. (2006), "Dynamic characteristic formulations for jointed space structures", J. Spacecraft Rocket., 43(4), 771-779. https://doi.org/10.2514/1.15537
  14. Wang, L.L. (2003), "Stress wave propagation for nonlinear viscoelastic polymeric at high strain rates", Chinese J. Mech. Series A, 19(1), 177-183.
  15. Wang, L.L. (2004), "Influences of stress wave propagation upon studying dynamic response of materials at high strain rates", J. Beijing Inst. Technol., 13(3), 225-235.
  16. Wang, L.L., Yang, L.M. and Ding, Y.Y. (2013), "On the energy conservation and critical velocities for the propagation of a "steady-shock" wave in a bar made of cellular material", Acta Mechanica Sinica, 29(3), 420-428. https://doi.org/10.1007/s10409-013-0024-3
  17. Wang, X.P. and Liu, G. (2015), "Study on impact dynamic of development for solar panel with cylindrical clearance joint", Procedia Eng., 1(99), 1345-1357.
  18. Wesolowski, Z. (1994), "Wave reflection on a continuous transition zone between two homogeneous materials", Acta Mech., 105(1), 119-131. https://doi.org/10.1007/BF01183946
  19. Yakupov, R.G. (2007), "Stress waves in a rod subjected to a moving load", J. Appl. Mech. Technic. Phys., 48(2), 241-249. https://doi.org/10.1007/s10808-007-0031-x
  20. Yuan, C.F. and Peng, S.P. (2006), "Seismic wave propagating in Kelvin-Voigt homogeneous visco-elastic media", Sci. China: Series D Earth Sci., 49(2), 147-153.

피인용 문헌

  1. Wave Analysis of Planar Deployable Structures with Revolute Clearance Joints Based on Spectral Element Method vol.10, pp.8, 2017, https://doi.org/10.1142/s1758825118500904