참고문헌
- Deng, D., Murakawa, H., Ma, N., 2012. Predicting welding deformation in thin plate panel structure by means of inherent strain and interface element. Sci. Technol. Weld. Join. 17(1), 13-21. https://doi.org/10.1179/1362171811Y.0000000065
- Ha, Yunsok, 2011. A study on weldment boundary condition for elasto-plastic thermal distortion analysis of large welded structures. J. KWJS 29(4), 410-415.
- Ha, Yunsok, Yang, Jinhyuk, 2010. Development of distortion analysis method for multi-pass butt-welding based on shell element. J. KWJS 28(1), 54-59.
- Ikushima, K., 2014. A Study of Development of Prediction Method ofWelding Deformation and Stresses of Welded Structures Using Idealized Explicit FEM (Doctor Thesis). Osaka Prefecture Univ.
- Kim, Tae-Jun, Jang, Beom-Seon, Kang, Sung-Wook, 2015a. Welding deformation analysis based on improved equivalent strain method considering the effect of temperature gradients. Int. J. Naval Archit. Ocean Eng. 7, 157-173. https://doi.org/10.1515/ijnaoe-2015-0012
- Kim, Tae-Jun, Jang, Beom-Seon, Kang, Sung-Wook, 2015b. Welding deformation analysis based on improved equivalent strain method to cover external constraint during cooling stage. Int. J. Naval Archit. Ocean Eng. 7(5), 805-816. https://doi.org/10.1515/ijnaoe-2015-0057
- MSC Patran PCL and Customisation, Version 9, 1999. MSC Software Corporation, CA (USA).
- NASTRAN Analysis Quick Reference Manual (Version 2008, r1), MSC Software, Santa Ana, CA 92707.
- Ninshu, Ma, 2015. An accelerated explicit method with a two-stage computation scheme for transient thermal stress and welding deformation. Trans. JWRI 44(1).
- Park, J.U., Lee, H.W., Bang, H.S., 2002a. Effects of mechanical constraints on angular distortion of welding joints. Sci. Technol. Weld. Join. 7(4), 232-239. https://doi.org/10.1179/136217102225004266
- Park, J.U., Lee, H.W., Bang, H.S., 2002b. Effects of mechanical constraints on angular distortion of welding joints. Sci. Technol. Weld. Join. 7(4), 232-240. https://doi.org/10.1179/136217102225004266
- Park, Jeong-Ung, An, GyuBaek, Woo, Wanchuck, Choi, Jae-Hyouk, Ma, Ninshu, 2014. Residual stress measurement in an extra thick multipass weld using initial stress integrated inherent strain method. Mar. Struct. 39, 424-437. https://doi.org/10.1016/j.marstruc.2014.10.002
- PCL Reference Manual, Volume 1, Function Descriptions, Version 9, 1999. MSC Software Corporation, CA (USA).
- PCL Reference Manual, Volume 2, Code Examples, Version 9, 1999. MSC Software Corporation, CA (USA).
- Sato, K., Terasaki, T., 1976. Effect of welding conditions on residual stresses distributions and welding deformation in welded structures materials. J. Jpn. Weld. Soc. 45(4), 302-308. https://doi.org/10.2207/qjjws1943.45.302
- Shibahara, Masakazu, Ikushima, Kazuki, 2010. Development of analytical method for welding mechanics using idealized explicit FEM. Trans. JWRI 39(2), 384-386.
- Tsai, C.L., Park, S.C., Cheng, W.T., 1999. Welding distortion of a thin-plate panel structure, welding journal. Res. Suppl. 78(15), 156s-165s.
- Tsuji, I., Ogawa, K., 1976. An analysis on transient stress and deformation of a steel strip subjected to local heating. Q. J. Jpn. Weld. Soc. 45(1), 36-41. https://doi.org/10.2207/qjjws1943.45.36
- Watanabe, Masaki, Takagi, Otomaro, Satoh, Kunihiko, Aso, Fumitaro, 1958. External constraint and shrinkage of butt-welded joints in the erection of assemblies on building way. J. Zosen Kiokai 104, 191-200.
피인용 문헌
- Predicting tolerance on the welding distortion in a thin aluminum welded T-joint vol.96, pp.5, 2017, https://doi.org/10.1007/s00170-018-1677-7
- Prediction of a transverse shrinkage of butt welded joints in shipyard conditions using the design of experimental approach vol.12, pp.None, 2017, https://doi.org/10.1016/j.ijnaoe.2020.07.001
- Modified Equivalent Load Method for Welding Distortion Analysis vol.8, pp.10, 2017, https://doi.org/10.3390/jmse8100794
- Experimental Investigation of Deposition Pattern on the Temperature and Distortion of Direct Energy Deposition-Based Additive Manufactured Part vol.10, pp.21, 2017, https://doi.org/10.3390/app10217653
- Multi-Pass Welding Distortion Analysis Using Layered Shell Elements Based on Inherent Strain vol.9, pp.6, 2017, https://doi.org/10.3390/jmse9060632
- A novel compliant assembly variation analysis with consideration of initial deviation and welding shrinkage vol.237, pp.None, 2017, https://doi.org/10.1016/j.oceaneng.2021.109636