참고문헌
- B. Cheng, S. Shrestha and K. Chou: Addtive Manuf., ADDMA 90 (2016) 1.
- M. J. Matthews, G. Guss, S. A. Khairallah, A. M. Rubenchik, P. J. Depond and W. E. King: Acta Mater., 114 (2016) 33. https://doi.org/10.1016/j.actamat.2016.05.017
- A. Ladewig, G. Schlick, M. Fisser, V. Schulze and U. Glatzel: Additive Manuf., 10 (2016) 1. https://doi.org/10.1016/j.addma.2016.01.004
- D. Herzog, V. Seyda, E. Wycisk and C. Emmelmann: Acta Mater., 117 (2016) 371. https://doi.org/10.1016/j.actamat.2016.07.019
- L. Parry, I. A. Ashcroft and R. D. Wildman: Additive Manuf., 12 (2016) 1. https://doi.org/10.1016/j.addma.2016.05.014
- P. Feng, X. Meng, J. F. Chen and L. Ye: Construct Build Mater., 93 (2015) 486. https://doi.org/10.1016/j.conbuildmat.2015.05.132
- D. Geldart, E. C. Abdullah, A. Hassnapour, L. C. Nwoke and I. Wouters: China Particuology, 4 (2006) 104. https://doi.org/10.1016/S1672-2515(07)60247-4
- R. O. GREY and J. K. Beddow: Powder Tech., 2 (1969) 323. https://doi.org/10.1016/0032-5910(69)80024-0
- C. J. Etti, Y. A. Yusof, N. L. Chin and S. M. Tahir: Agric. Agric. Sci. Procedia., 2 (2014) 120. https://doi.org/10.1016/j.aaspro.2014.11.018
- H. Y. Jung, S. J. Choi, K. G. Prashanth, M. Stoica, S. Scudino, S. Yi, U. Kuhn, D. H. Kim, K. B. Kim and J. Eckert: Mater. Des., 86 (2015) 703. https://doi.org/10.1016/j.matdes.2015.07.145
- L. J. Jallo, M. Schoenitz, E. L. Dreizin, R. N. Dave and C. E. Johnson: Powder Tech., 204 (2010) 63. https://doi.org/10.1016/j.powtec.2010.07.017
- Y. Meng, S. Sugiyama and J. Yanagimoto: J. Mater. Process. Tech., 212 (2012) 1731. https://doi.org/10.1016/j.jmatprotec.2012.04.003
- A. J. Pinkerton and L. Li: Int. J. Adv. Manuf. Technol., 25 (2005) 471. https://doi.org/10.1007/s00170-003-1844-2
- D. Geldart, E. C. Abdullah and A. Verlinden: Powder Tech., 190 (2009) 70. https://doi.org/10.1016/j.powtec.2008.04.089
- E. C. Abdullah and D. Geldart: Powder Tech., 102 (1999) 151. https://doi.org/10.1016/S0032-5910(98)00208-3
- G. Petzow: Metallographic Etching, R. Koch and James A. Nelson (Ed.), AMERICAN SOCIETY FOR METALS, Metals Park (1978) 62.
- M. Das, V. K. Balla, D. Basu, S. Bose and A. Bandyopadhyay: Scripta Mater., 63 (2010) 438. https://doi.org/10.1016/j.scriptamat.2010.04.044
- G. Telasang, J. D. Majumdar, G. Padmanabham, M. Tak and I. Manna: Surf. Coat. Tech., 258 (2014) 1108. https://doi.org/10.1016/j.surfcoat.2014.07.023
- http://blog.naver.com/rsm6666/100136500997
피인용 문헌
- Nano-mechanical Behavior of H13 Tool Steel Fabricated by a Selective Laser Melting Method pp.1543-1940, 2019, https://doi.org/10.1007/s11661-018-5024-2
- A study about sculpture characteristic of SKD61 tool steel fabricated by selective laser melting(SLM) process vol.25, pp.2, 2018, https://doi.org/10.4150/KPMI.2018.25.2.137
- Evaluation of Strain-Rate Sensitivity of Selective Laser Melted H13 Tool Steel Using Nanoindentation Tests vol.8, pp.8, 2018, https://doi.org/10.3390/met8080589