Abstract
This study was carried out to design the stable elements of the aerial work machinery used in the orchard and farmland which had been conducted in the previous research. A hydraulic lifting lift has been developed to work safely at irregular and inclined locations using an auto leveling system and a horizontal sensor. The development of a centralized controller including remote control has been carried out in order to control the elevated work platform. Through the developed module, we carried out on-site test run to check whether the control is stable in the elevation workbench. Through the structural analysis of the elevation workbench, the maximum load and the equal load amount that the worker can safely work on the workbench are presented.
본 연구는 선행 연구로 진행되었던 과수원 및 농경지에서 사용되는 고소작업차의 안정적인 요소를 설계하기 위하여 진행되었다. Auto leveling system과 수평센서를 이용하여 불규칙하고 경사가진 곳에서 안전하게 작업하기 위하여 유압식 상승리프트를 개발하였으며 고소작업대에서의 제어를 하기 위하여 원격 제어를 포함한 중앙집중식 컨트롤러의 개발을 진행하였다. 개발된 모듈을 통하여 고소작업대에서의 안정적 제어가 되는지 현장 시 운행을 실시하였으며, 고소 작업대의 구조해석을 통하여 작업자가 작업대에서 안전하게 작업을 할 수 있는 최대 적재 하중 및 균등 적재량을 제시함으로서 보다 안전에 대해 유의하도록 하였다. 각 부위별 설계 및 검증, 제작을 통하여 완성된 고소기계차의 현장 시운행을 통하여 프로토타입의 고소기계차를 제작하였고, 몇 가지의 수정 보완 사항을 통하여 연구를 지속적으로 행할 예정이다.