DOI QR코드

DOI QR Code

Simple Bump-removal Scheme for the Position Signal of PM Motor Drives with Low-resolution Hall-effect Sensors

  • Lee, Dong-Myung (School of Electronic and Electrical Engineering, Hongik University)
  • Received : 2016.06.17
  • Accepted : 2016.12.12
  • Published : 2017.07.01

Abstract

The vector control technique using low-resolution Hall-effect sensors has been widely used especially in consumer electronics. Due to electrical and/or mechanical unevenness related to binary-type Hall sensors, the calculated or estimated position information has discontinuities so called bumps, which causes the deterioration of vector control performance. In order to obtain a linearly changing position signal from low-precision Hall-effect sensors, this paper proposes a simple bumps in position signal removal algorithm that consists of a first-order observer with low-pass filtering scheme. The proposed algorithm has the feature of no needs for system parameters and additional estimation processes. The validity of the proposed method is verified through simulation and experimental results.

Keywords

References

  1. H. J. Ahn and D.M. Lee, "A new bumpless rotorflux position estimation scheme for vector-controlled washing machine," IEEE Trans. on Indus. Informatics, vol. 12, no. 2, pp. 466-473, April 2016. https://doi.org/10.1109/TII.2016.2516974
  2. C. H. Hong, J. Lee, and D.M. Lee, "Sensorless scheme of interior permanent magnet synchronous motor with wide speed control range," Journal of Power Elect., vol. 16, no. 6, pp. 2173-2181, Nov. 2016. https://doi.org/10.6113/JPE.2016.16.6.2173
  3. S. Y. Jung and K.H. Nam, "PMSM control based on edge-field hall sensor signals through ANF-PLL processing," IEEE Trans. Ind. Elect., vol. 58, no. 11, pp. 5121-5129, Nov. 2011. https://doi.org/10.1109/TIE.2011.2116850
  4. H. Kim, S. Yi, and R.D. Lorenz, "Using low resolution position sensors in bumpless position/speed estimation methods for low cost PMSM drives," Industry Appli. Conf., Hong Kong, China, vol. 4, pp. 2518-2525, Oct. 2005.
  5. L. Kreindler, I. Iacob, G. Casaru, A. Sarca, R. Olteanu, and D. Matianu, "PMSM drive using digital hall position sensors for light EV applications," Inter. Symp. on Advanced Topics in Electrical Eng., Bucharest, Romania, pp. 199-204, 2015.
  6. F. G. Capponi, G. Donato, L. Ferraro, O. Honorati, M.C. Harke, and R.D. Lorenz, "AC brushless drive with low-resolution Hall-effect sensors for surfacemounted PM Machines," IEEE Trans. on Industry Appli., vol. 42, no. 2, pp. 526-535, Mar./Apr. 2006. https://doi.org/10.1109/TIA.2005.863904
  7. S.B. Ozturk, B. Akin, H.A. Toliyat, and F. Ashrafzadeh, "Low-cost direct torque control of permanent magnet synchronous motor using Hall-effect sensors," in Proc. Twenty-First Annual IEEE Applied Power Electronics Conf. and Expo., Dallas, USA, pp. 19-23, Mar. 2006.
  8. A. Lidozzi, L. Solero, F. Crescimbini, and A. Napoli, "SVM PMSM drive with low resolution hall effect sensors," IEEE Trans. Power Electron., vol. 22, no. 1, pp. 282-290, Jan. 2007. https://doi.org/10.1109/TPEL.2006.886603
  9. P. B. Beccue, S. D. Pekarek, B. J. Deken, and A. C. Koenig, "Compensation for asymmetries and misalignment in a Hall-effect position observer used in PMSM torque-ripple control," IEEE Trans. Ind. Appl., vol. 43, no. 2, pp. 560-570, Mar./Apr. 2007. https://doi.org/10.1109/TIA.2006.889883
  10. T. D. Batzel and K. Y. Lee, "Slotless permanent magnet synchronous motor operation without a high resolution rotor angle sensor," IEEE Trans. Energy Conv., vol. 15, no. 4, pp. 366-371, Dec. 2000. https://doi.org/10.1109/60.900494
  11. A. Yoo, S.K. Sul, D.C. Lee, and C.S. Jun, "Novel speed and rotor position estimation strategy using a dual observer for low-resolution position sensors," IEEE Trans. Power Electron., vol. 24, no. 12, pp. 2897-2906, Dec. 2009. https://doi.org/10.1109/TPEL.2009.2022969
  12. Z. M. Dalala, Y. H. Cho, and J. H. Lai, "Enhanced vector tracking observer for rotor position estimation for PMSM drives with low resolution Hall-effect position sensors," IEEE Inter. Electric Machines & Drives Conf., pp. 484-491, 2013.
  13. J. H. Lee, C. H. Hwang, K. M. Kim, W. C. Lee, C. Y. Won, and Y.R. Kim, "Optimal washing time control algorithm for the drum washing machine using an inertia estimator," in Proc. IEEE 2nd Inter. Power and Energy Conf., Johor Bahru, Malaysia, pp. 1393-1398, Dec. 2008.
  14. Y. J. Han, C. Y. Lee, and Y. Sun, "A study on the sensor applications for position detection and guideway monitoring in high speed Maglev," Modern Mech. Engineering, vol. 4, no. 4, pp. 165-174, 2014. https://doi.org/10.4236/mme.2014.44016