Advances in concrete construction

  • 제5권3호
  • /
  • Pages.271-288
  • /
  • 2017
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Durability of self compacted concrete containing slag in hot climate

  • Yahiaoui, Walid (Geomaterials Laboratory, Department of Civil Engineering, University of Blida) ;
  • Kenai, Said (Geomaterials Laboratory, Department of Civil Engineering, University of Blida) ;
  • Menadi, Belkacem (Geomaterials Laboratory, Department of Civil Engineering, University of Blida) ;
  • Kadri, El-Hadj (Laboratory L2MGC, University of Cergy Pontoise)
  • 투고 : 2017.04.15
  • 심사 : 2017.06.07
  • 발행 : 2017.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper aims to investigate the effects of replacing cement with ground granulated blast furnace slag (GGBFS) in self compacting concrete in the fresh and hardened state. The performance of SCC in moderate climate is well investigated but few studies are available on the effect of hot environment. In this paper, the effect of initial water-curing period and curing conditions on the performance of SCC is reported. Cement was substituted by GGBFS by weight at two different levels of substitution (15% and 25%). Concrete specimens were stored either in a standard environment (T=$20^{\circ}C$, RH=100%) or in the open air in North Africa during the summer period (T=35 to $40^{\circ}C$; R.H=50 to 60%) after an initial humid curing period of 0, 3, 7 or 28 days. Compressive strength at 28 and 90 days, capillary absorption, sorptivity, water permeability, porosity and chloride ion penetration were investigated. The results show that the viscosity and yield stress are decreased with increasing dosage of GGBFS. The importance of humid curing in hot climates in particular when GGBFS is used is also proved. The substitution of cement by GGBFS improves SCC durability at long term. The best performances were observed in concrete specimens with 25% GGBFS and for 28 days water curing.

키워드

참고문헌

  1. Adjoudj, M., Ezziane, K., Kadri, E.H., Ngo, T.T. and Kaci, A. (2014), "Evaluation of rheological parameters of mortar containing various amounts of mineral addition with polycarboxylate superplasticizer", Constr. Build. Mater., 70, 549-559. https://doi.org/10.1016/j.conbuildmat.2014.07.111
  2. Aissoun, B., Khayat, K. and Gallias, J.L. (2016), "Variations of sorptivity with rheological properties of concrete cover in self-consolidating concrete", Constr. Build. Mater., 113, 113-120. https://doi.org/10.1016/j.conbuildmat.2016.03.006
  3. Al-Khaiat, H. and Haque, M.N. (1998), "Effect of initial curing on early strength and physical properties of a lightweight concrete", Cement Concrete Res., 28(6), 859-866. https://doi.org/10.1016/S0008-8846(98)00051-9
  4. Al-Otaibi, S. (2008), "Durability of concrete incorporating GGBS activated by water-glass", Constr. Build. Mater., 22(10), 2059-2067. https://doi.org/10.1016/j.conbuildmat.2007.07.023
  5. Aparicio, S., Martinez-Ramirez, S., Molero-Armenta, M., Fuente, J.V. and Hernandez, M.G. (2016b), "The effect of curing relative humidity on the microstructure of self-compacting concrete", Constr. Build. Mater., 104, 154-159. https://doi.org/10.1016/j.conbuildmat.2015.12.057
  6. Aparicio, S., Martinez-Ramirez, S., Ranz, J., Fuente, J.V. and Hernandez, M.G. (2016a), "Microstructural and mechanical properties study of the curing process of self-compacting concrete", Mater. Des., 94, 479-486. https://doi.org/10.1016/j.matdes.2016.01.067
  7. ASTM 1585-11 (2012), Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic Cement Concretes.
  8. Belaidi, A.S.E., Azzouz, L., Kadri, E.H. and Kenai, S. (2012), "Effect of natural pozzolana and marble powder on the properties of self-compacted concrete", Constr. Build. Mater., 31, 251-257. https://doi.org/10.1016/j.conbuildmat.2011.12.109
  9. Benabed, B., Kadri, E.H., Azzouz, L. and Kenai, S. (2012), "Properties of self-compacting mortar made with various types of sand", Cement Concrete Compos., 34(10), 1167-1173. https://doi.org/10.1016/j.cemconcomp.2012.07.007
  10. Boukendakdji, O., Kadri, E.H. and Kenai, S. (2012), "Effect of granulated blast furnace slag and superplasticizer type on the fresh properties and compressive strength of self-compacting concrete", Cement Concrete Compos., 34(4), 583-590. https://doi.org/10.1016/j.cemconcomp.2011.08.013
  11. Boukendakdji, O., Kenai, S., Kadri, E.H. and Rouis F. (2009), "Effect of slag on the self-compacted concrete", Constr. Build. Mater., 23(7), 2593-2598. https://doi.org/10.1016/j.conbuildmat.2009.02.029
  12. Chun-Ya, S., Wen-Ten, K. and Chuen-Ui, J. (2016), "Analytical model of expansion for electric arc furnace oxidizing slag containing concrete", Comput. Concrete, 18(5), 283-303.
  13. CPC11.3 (1984), Absorption of Water by Concrete by Immersion under Vacuum in 'RILEM Recommendations for the Testing and Use of Constructions Materials, RILEM, 36-37.
  14. Deboucha, W., Oudjit, M.N., Bouzid, A. and Belagraa, L. (2015), "Effect of incorporating blast furnace slag and natural pozzolana on compressive strength and capillary water absorption of concrete", Proceedings of the 7th Scientific-Technical Conference Material Problems in Civil Engineering (MATBUD'2015), Proc. Eng., 108, 254-261.
  15. Deepankar, K.A., Bhupinder, S. and Surender, K.V. (2016), "The effect of attack of chloride and sulphate on ground granulated blast furnace slag concrete", Adv. Concrete Constr., 4(2), 107-121. https://doi.org/10.12989/acc.2016.4.2.107
  16. DIN 1048 (2000), Testing Method for Concrete: Determination of the Depth of Penetration of Water under Pressure.
  17. EFNARC (2012), "The European guidelines for self-compacting concrete", Cement Concrete Compos., 34, 583-590. https://doi.org/10.1016/j.cemconcomp.2011.08.013
  18. Ferhat, B.A. and Tohumcu, I. (2013), "Effects of different curing regimes on the compressive strength properties of self-compacting concrete incorporating fly ash and silica fume", Mater. Des., 51, 12-18. https://doi.org/10.1016/j.matdes.2013.03.106
  19. Gesoglu, M., Guneyisi, E. and Ozbay, E. (2009), "Properties of self-compacting concretes made with binary, ternary, and quaternary cementitious blends of fly ash, blast furnace slag, and silica fume", Constr. Build. Mater., 23(5), 1847-1854. https://doi.org/10.1016/j.conbuildmat.2008.09.015
  20. Hadj-Sadok, A., Kenai, S., Courard, L. and Darimont, A. (2011), "Microstructure and durability of mortars modified with medium active blast furnace slag", Constr. Build. Mater., 25(2), 1018-1025. https://doi.org/10.1016/j.conbuildmat.2010.06.077
  21. Hadj-Sadok, A., Kenai, S., Courard, L., Michel, F. and Khatib, J. (2012), "Durability of mortar and concretes containing slag with low hydraulicity activity", Cement Concrete Compos., 34, 671-677. https://doi.org/10.1016/j.cemconcomp.2012.02.011
  22. Heba, A.M. (2011), "Effect of fly ash and silica fume on compressive strength of self-compacting concrete under different curing conditions", Ain Shams Univ. J., 2(2), 79-86. https://doi.org/10.1016/j.asej.2011.06.001
  23. Her-Yung, W. and Chih-Chung, L. (2013), "A study of fresh and engineering properties of self-compacting high slag concrete (SCHSC)", Constr. Build. Mater., 42, 132-136. https://doi.org/10.1016/j.conbuildmat.2012.11.020
  24. Ibrahim, M., Shameem, M., Al-Mehthel, M. and Maslehuddin, M. (2013), "Effect of curing methods on strength and durability of concrete under hot weather conditions", Cement Concrete Compos., 41, 60-69. https://doi.org/10.1016/j.cemconcomp.2013.04.008
  25. Jooss, M. and Reinhardt, H.W. (2002), "Permeability and diffusivity of concrete as function of temperature", Cement Concrete Res., 32(9), 1497-1504. https://doi.org/10.1016/S0008-8846(02)00812-8
  26. Kefeng, T. and Gjorv, O.E. (1996), "Performance of concrete under different curing conditions", Cement Concrete Res., 26(3), 355-361. https://doi.org/10.1016/S0008-8846(96)85023-X
  27. Kenai, S. and Lachemat, L. (1995), "Effect of curing on properties of concrete in hot climate", Proceedings of the 6th Arab Civil Engineering Symposium, Damascus, Syria, October.
  28. Kenai, S. and Amrane, A. (1996), "Mechanical properties and permeability of slag in Algerian got climate", Proceedings of the 4th International Conference on Concrete Technology in Developing Countries, Gazimagusa, Turkey.
  29. Li, Z. and Ding, Z. (2003), "Property improvement of Portland cement by incorporating with metakaolin and slag", Cement Concrete Res., 33(4), 579-584. https://doi.org/10.1016/S0008-8846(02)01025-6
  30. Lopez-Gayarre, F., Perez, C.L.C., Serrano Lopez, M.A. and Cabo, A.D. (2014), "The effect of curing conditions on the compressive strength of recycled aggregate concrete", Constr. Build. Mater., 53, 260-266. https://doi.org/10.1016/j.conbuildmat.2013.11.112
  31. Mucteba, U. and Mansur, S. (2011), "Performance of self-compacting concrete containing different mineral admixtures", Constr. Build. Mater., 25(11), 4112-4120. https://doi.org/10.1016/j.conbuildmat.2011.04.032
  32. NF P 18-455 (2003), Testing Hardened Concrete-Part 3: Compressive Strength of Test Specimens.
  33. Okamura, H. and Ouchi, M. (1999), "Self-compacting concrete-development, present use and future", Proceedings of the 1st International RILEM Symposium on Self-Compacting Concrete, Stockholm, Sweden.
  34. Okamura, H. and Ouchi, M. (2003), "Self-compacting concrete", Adv. Concrete Technol., 1(1), 5-15. https://doi.org/10.3151/jact.1.5
  35. Olivera, M.J., Ribeiro, A.B. and Branco, F.G. (2015), "Curing effect in the shrinkage of a lower strength selfcompacting concrete", Constr. Build. Mater., 93, 1206-1215. https://doi.org/10.1016/j.conbuildmat.2015.04.035
  36. Ozer, B. and Ozkul, M. (2004), "The influence of initial water curing on the strength development of ordinary portland and pozzolanic cement concretes", Cement Concrete Res., 1(8), 1-6.
  37. Rakesh, K.P. and Bibhuti, B.M. (2016), "Fresh and hardened properties of concrete incorporating ground blast furnace slag-a review", Adv. Concrete Constr., 4(4), 283-303. https://doi.org/10.12989/acc.2016.4.4.283
  38. Ramezanianpour, A.A. (1995), "Effect of curing on the compressive strength, resistance to c-ion penetration and porosity of concretes incorporating slag, ash or silica fume", Cement Concrete Compos., 17(2), 125-133. https://doi.org/10.1016/0958-9465(95)00005-W
  39. Ramezanianpour, A.M., Esmaeili, K., Ghahari, S.A. and Ramezanianpour, A.A. (2014), "Influence of initial steam curing and different types of mineral additives on mechanical and durability properties of selfcompacting concrete", Constr. Build. Mater., 73, 187-194. https://doi.org/10.1016/j.conbuildmat.2014.09.072
  40. Shuai, N., Shuguang, H., Fazhou, W., Pan, Y., Yaohong, Z., Junneng, Y. and Yunpeng, L. (2016), "Internal curing: A suitable method for improving the performance of heat-cured concrete", Constr. Build. Mater., 122, 294-301. https://doi.org/10.1016/j.conbuildmat.2016.05.159
  41. Silva, P.R. and Da, D.B. (2015), "Experimental study of the porosity and microstructure of self-compacting concrete (SCC) with binary and ternary mixes of fly ash and limestone filler", Constr. Build. Mater., 86, 101-112. https://doi.org/10.1016/j.conbuildmat.2015.03.110
  42. Soualhi, H., Kadri, E.H., Ngo, T.T., Bouvet, A., Cussigh, F. and Kenai, S. (2014), "A vane rheometer for fresh mortar: Development and validation", Appl. Rheol., 24(2), 1-7.
  43. Sri-Rama, C.M., Swamy Naga, R.G.P., Rathish, K.P., Rajesh, K.G. and Raveena, C. (2016), "Effect of selfcuring chemicals in self-compacting mortars", Constr. Build. Mater., 107, 356-364. https://doi.org/10.1016/j.conbuildmat.2016.01.018
  44. Turkmen, I. and Kantarci, A. (2007), "Effects of expanded perlite aggregate and different curing conditions on the physical and mechanical properties of self-compacting concrete", Build. Environ., 42(6), 2378-2383. https://doi.org/10.1016/j.buildenv.2006.06.002
  45. Zhao, H., Sun, W., Wu, X. and Gao, B. (2012), "Effect of initial water-curing period and curing condition on the properties of self-compacting concrete", Mater. Des., 35, 194-200. https://doi.org/10.1016/j.matdes.2011.09.053

피인용 문헌

  1. Combined Effects of Graphite Tailings and Curing Conditions on the Early-Age Performances of Cement Mortar vol.2020, pp.None, 2017, https://doi.org/10.1155/2020/5965328
  2. Effect of horizontal joints on structural behavior of sustainable self-compacting reinforced concrete beams vol.10, pp.5, 2017, https://doi.org/10.12989/acc.2020.10.5.455
  3. Combining internal and external curing to improve quality of self-compacting concrete with consideration of climate effects vol.12, pp.2, 2021, https://doi.org/10.12989/acc.2021.12.2.085
  4. Behavior of modified concrete based on crumb rubber: Experimental test and numerical investigation vol.12, pp.2, 2017, https://doi.org/10.12989/acc.2021.12.2.125