한국초전도ㆍ저온공학회논문지 (Progress in Superconductivity and Cryogenics)

  • 제19권2호
  • /
  • Pages.14-18
  • /
  • 2017
  • /
  • 1229-3008(pISSN)
  • /
  • 2287-6251(eISSN)
한국초전도저온학회 (The Korean Society of Superconductivity and Cryogenics)
권호 표지
DOI QR코드

DOI QR Code

Interior seeding combined with top seeding for the fabrication of single grain REBCO bulk superconductors

  • 투고 : 2017.04.30
  • 심사 : 2017.05.17
  • 발행 : 2017.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study presents three dimensional (3-D) seeding technique which is a modification of interior seeding. 3-D seeding is beneficial for shortening the processing period and enhancing the magnetic properties of REBCO bulk superconductors fabricated by melt growth. Oxygen channels were provided by using divided powder compacts instead of by using a rubber insert. Microstructure observations revealed that the grains grown from the seeds impinged each other and formed low angle grain boundaries of (001)/(001). It has been shown that the 3-D seeding technique reduces the volume fraction of a-c growth sector and thereby maximizes the area of a-b growth sector which attribute to the high magnetic characteristics of single grain REBCO bulk superconductors.

키워드

참고문헌

  1. M. Morita, S. Takebayashi, M. Tanaka, K. Kimura, K. Miyamoto and K. Sawano, "Quench and melt growth (QMG) process for large bulk superconductor fabrication," Adv. Supercond., vol. 3, pp. 733-736, 1991.
  2. S. Meslin and J. G. Noudem, "Infiltration and top seeded grown mono-domain $YBa_2Cu_3O_{7-x}$ bulk superconductor," Supercond. Sci. Technol., vol. 17, pp. 1324-1328, 2004. https://doi.org/10.1088/0953-2048/17/11/014
  3. C. Varanasi, P. J. McGinn, V. Pavate and E. P. Kvam, "Effects of processing parameters on the levitation force of melt-processed $YBa_2Cu_3O_x$," J. Mater. Res., vol. 10 , pp. 2251-6, 1995 https://doi.org/10.1557/JMR.1995.2251
  4. P. Schaetzle, G. Krabbes, G. Stover, G. Fuchs and D. Schlafer, "Multi-seeded melt crystallization of YBCO bulk material for cryogenic applications," Supercond. Sci. Technol., vol. 12, pp. 69-76, 1999. https://doi.org/10.1088/0953-2048/12/2/003
  5. Y. A. Jee, C. -J. Kim, T. -H. Sung and G. -W. Hong, "Top-seeded melt growth of Y-Ba-Cu-O superconductor with multi-seeding," Supercond. Sci. Technol., vol. 13, pp. 195-201, 2000. https://doi.org/10.1088/0953-2048/13/2/314
  6. C. -J. Kim, S. -D. Park, H. -W. Park and B. -H. Jun, "Interior seeding for the fabrication of single-grain REBCO bulk superconductors," Supercond. Sci. Technol., vol. 29, pp. 034003-034009, 2016. https://doi.org/10.1088/0953-2048/29/3/034003
  7. T. D. Withnell, N. H. Babu, K. Iida, Y. Shi, D. A. Cardwell, S. Haindl, F. Hengstberger and H. W. Weber, "The effect of seed orientation and separation on the field trapping properties of multi-seeded, melt processed Y-Ba-Cu-O," Physica C, vol. 445-448, pp. 382-386, 2006. https://doi.org/10.1016/j.physc.2006.04.023
  8. M. Sawamura, M. Morita and H. Hirano, "A new method for multiseeding RE-Ba-Cu-O superconductor," Supercond. Sci. Technol., vol. 17, pp. S418-421, 2004. https://doi.org/10.1088/0953-2048/17/5/066
  9. L. Cheng, L. S. Guo, Y. S. Wu, X. Yao and D. A. Cardwell, "Multi-seeded growth of melt processed Gd-Ba-Cu-O bulk superconductors using different arrangements of thin film seeds," J. Cryst. Growth, vol. 366, pp. 1-7, 2013. https://doi.org/10.1016/j.jcrysgro.2012.11.069
  10. C. -J. Kim, Y. A. Jee, S. C. Kwon, T. H. Sung and G. W. Hong, "Control of YBCO growth at the compact/substrate interface by bottom seeding and $Yb_2O_3$ coating in seeded melt-growth processed YBCO oxides using a MgO substrate," Physica C, vol. 315, pp. 263-270, 1999. https://doi.org/10.1016/S0921-4534(99)00239-7
  11. C. -J. Kim, S. A. Jung, H. W. Park, B. H. Jun and S. D. Park, "Top surface morphologies of melt growth processed bulk superconductors with corner or edge seeding," Physica C, vol. 495, pp. 225-228, 2013. https://doi.org/10.1016/j.physc.2013.09.012
  12. Y. Shi, J. H. Durrell, A. R. Dennis, Z. Zhang, W. Zhai, N. Hari Babu and D. A. Cardwell, "A comparison of $0^{\circ}$-$0^{\circ}$ and $45^{\circ}$-$45^{\circ}$ bridge-seeded YBCO single grains," Am. Ceram. Soc., vol. 96, pp. 1757-62, 2013. https://doi.org/10.1111/jace.12350
  13. Y. -H. Shi, J. H. Durrell, A. R. Dennis and D. A. Cardwell, "Bulk YBCO seeded with $45^{\circ}-45^{\circ}$ bridge-seeds of different lengths," Supercond. Sci. Technol., vol. 26, pp. 015012-015016, 2013. https://doi.org/10.1088/0953-2048/26/1/015012
  14. Y. Shi, J. H. Durrell, A. R. Dennis, K. Huang, D. K. Namburi, D. Zhou and D. A. Cardwell, "Multiple seeding for the growth of bulk GdBCO-Ag superconductors with single grain behavior," Supercond. Sci. Technol., vol. 30, pp. 015003-015010, 2016.
  15. C. -J. Kim, Y. A. Jee, G. -W. Hong, T. -H. Sung, Y. -H. Han, S. -C. Han, S. -J. Kim, W. Bieger and G. Fuchs, "Effects of the seed dimension on the top surface growth mode and the magnetic properties of top-seeded melt growth processed YBCO superconductors," Physica C, vol. 331, pp. 274-284, 2000. https://doi.org/10.1016/S0921-4534(00)00018-6
  16. D. X. Huang, X. Yao, K. Nomura, Y. Wu, Y. Nakamura, T. Izumi and Y. Shiohara, "Mechanism of liquid-phase epitaxy growth of $NdBa_2Cu_3O_{7-x}$ film from low-peritectic-temperature $YBa_2Cu_3O_{7-x}$ seed film," J. Mater. Res., vol. 17, pp. 747-754, 2002. https://doi.org/10.1557/JMR.2002.0109
  17. S. B, Yan, Y. Y. Chen, H. Ikuta and X. Yao, "Enhanced growth rate of a YBCO bulk in the melt-textured process under 1 atm oxygen pressure," IEEE Trans. on Appl. Supercond., vol. 20, pp. 66-70, 2010. https://doi.org/10.1109/TASC.2009.2039136
  18. Y. Jung, S. J. Go, H. T. Joo, Y. J. Lee, S. D. Park, B. H. Jun and C. J. Kim, "Orientation and thickness dependence of the magnetic levitation force and trapped magnetic field of single grain $Y_{1.5}Ba_2Cu_3O_{7-y}$ bulk superconductors," Progress in Superconductivity and Cryogenics, vol. 19, pp. 30-34, 2017. https://doi.org/10.9714/psac.2017.19.1.030