Structural Monitoring and Maintenance

  • 제4권2호
  • /
  • Pages.153-173
  • /
  • 2017
  • /
  • 2288-6605(pISSN)
  • /
  • 2288-6613(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Experimental axial force identification based on modified Timoshenko beam theory

  • Li, Dong-sheng (State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology) ;
  • Yuan, Yong-qiang (State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology) ;
  • Li, Kun-peng (State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology) ;
  • Li, Hong-nan (State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology)
  • 투고 : 2017.05.12
  • 심사 : 2017.06.08
  • 발행 : 2017.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

An improved method is presented to estimate the axial force of a bar member with vibrational measurements based on modified Timoshenko beam theory. Bending stiffness effects, rotational inertia, shear deformation, rotational inertia caused by shear deformation are all taken into account. Axial forces are estimated with certain natural frequency and corresponding mode shape, which are acquired from dynamic tests with five accelerometers. In the paper, modified Timoshenko beam theory is first presented with the inclusion of axial force and rotational inertia effects. Consistent mass and stiffness matrices for the modified Timoshenko beam theory are derived and then used in finite element simulations to investigate force identification accuracy under different boundary conditions and the influence of critical axial force ratio. The deformation coefficient which accounts for rotational inertia effects of the shearing deformation is discussed, and the relationship between the changing wave speed and the frequency is comprehensively examined to improve accuracy of the deformation coefficient. Finally, dynamic tests are conducted in our laboratory to identify progressive axial forces of a steel plate and a truss structure respectively. And the axial forces identified by the proposed method are in good agreement with the forces measured by FBG sensors and strain gauges. A significant advantage of this axial force identification method is that no assumption on boundary conditions is needed and excellent force identification accuracy can be achieved.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Barnes, M.R. (2009), "Form finding and analysis of tension structures by dynamic relaxation", Int. J. Space Struct., 14(2), 89-104. https://doi.org/10.1260/0266351991494722
  2. Chen, L., Song, J. and Zhang, Q. (2008), "Theory and engineering practice research on cable tension measurement with EM method", Constr. Technol., (in Chinese), 37(5), 144-153.
  3. Chen, R., Wan, C.F. and Xue, S.T. (2005), "The correction and effect of equation of the Timoshenko beam motion", J. Tongji university: natural science edition, 33(6), 711-715.
  4. Friedman, Z. and Kosmatka, J.B. (1993), "An improved two-node Timoshenko beam finite element", Comput. Struct., 47(3), 473-481. https://doi.org/10.1016/0045-7949(93)90243-7
  5. Greening, P.D. and Lieven, N.A.J. (2003), "Identification and updating of loading in frameworks using dynamic measurements", J. Sound Vib., 260(1), 101-115. https://doi.org/10.1016/S0022-460X(02)00902-1
  6. Irvine, H.M. and Irvine, H.M. (1992), Cable structures (Vol. 5), New York: Dover Publications.
  7. Irvine, M. (1978), "Free vibrations of inclined cables", J. Struct. Div. - ASCE, 104(2), 343-347.
  8. Jeanlouis, Guyader. (2006), "Vibrations in Continuous Media", Library of Congress Cataloging-in-Publication Data.
  9. Li, H.N., Li, D.S., Ren, L., Yi, T.H., Jia, Z.G. and Li, K.P. (2016), "Structural health monitoring of innovative civil engineering structures in Mainland China", Struct. Monit. Maint., 3(1), 1-32. https://doi.org/10.12989/SMM.2016.3.1.001
  10. Li, H.N., Yi, T.H., Ren, L., Li, D.S. and Huo, L.S. (2014), "Reviews on innovations and applications in structural health monitoring for infrastructures", Struct. Monit. Maint., 1(1), 1-45. https://doi.org/10.12989/SMM.2014.1.1.001
  11. Li, S., Reynders, E. Maes, K. and De Roeck, G. (2013), "Vibration-based estimation of axial force for a beam member with uncertain boundary conditions", J. Sound Vib., 332(4), 795-806. https://doi.org/10.1016/j.jsv.2012.10.019
  12. Maes, K., Peeters, J., Reynders, E., Lombaert, G. and De Roeck, G. (2013), "Identification of axial forces in beam members by local vibration measurements", J. Sound Vib., 332(21), 5417-5432. https://doi.org/10.1016/j.jsv.2013.05.017
  13. Maes, K., Reynders, E., De Roeck, G. and Lombaert, G. (2011), "Determination of axial forces by local vibration measurements", Master's Thesis, Department of Civil Engineering, KU Leuven.
  14. Mehrabi, A.B. and Tabatabai, H. (1998), "Unified finite difference formulation for free vibration of cables", J. Struct. Eng. -ASCE, 124(11), 1313-1322. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:11(1313)
  15. Minardo, A., Coscetta, A., Porcaro, G., Giannetta, D., Bernini, R. and Zeni, L. (2014), "Distributed optical fiber sensors for integrated monitoring of railway infrastructures", Struct. Monit. Maint., 1(2), 173-182. https://doi.org/10.12989/SMM.2014.1.2.173
  16. Peeters, B. and De Roeck, G. (2001), "Stochastic system identification for operational modal analysis: a review", ASME J. Dynam. Syst., Meas. Control., 123 (4) 659-667.
  17. Reynders, E."System identification methods for (operational) modal analysis: review and comparison, Archives of Computational Methods in Engineering", 19(1) 51-124.
  18. Russell, J.C. and Lardner, T.J. (1998), "Experimental determination of frequencies and tension for elastic cables", J. Eng. Mech. -ASCE , 124(10), 1067-1072. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:10(1067)
  19. Stephen, N.G. (2006), "The second spectrum of Timoshenko beam theory-Further assessment", J. Sound Vib., 292(1-2), 372-389. https://doi.org/10.1016/j.jsv.2005.08.003
  20. Su, X. (2006), "Application of MTS810 for Evaluating Mechanical Property of Ceramics", Modern Scientific Instruments.
  21. Tullini, N. and Laudiero, F. (2008). "Dynamic identification of beam axial loads using one flexural mode shape", J. Sound Vib., 318(1), 131-147. https://doi.org/10.1016/j.jsv.2008.03.061
  22. Wang, J. and Yang, Q.S. (2017), "Sensor selection approach for damage identification based on response sensitivity", Struct. Monit. Maint., 4(1), 53-68. https://doi.org/10.12989/SMM.2017.4.1.053
  23. Williams, F.W. and Wittrick, W.H. (1970), "An automatic computational procedure for calculating natural frequencies of skeletal structures", Int. J. Mech. Sci., 12(9), 781-791. https://doi.org/10.1016/0020-7403(70)90053-6
  24. Yamagiwa, I. Utsuno, H. Endo, K. and Sugii, K. (1999), "Application of simultaneous identification of tension and flexural rigidity at once to the bridge cables", Proceedings of the IABSE Conference, Cable-Stayed Bridges, Past, Present, and Future.
  25. Zui, H. Hamazaki, Y. and Namita, Y. (2002), "Study on tension and flexual rigidity identification for cables having large ratio of the diameter and the length", Doboku Gakkai Ronbunshu, 2002(703), 141-149.

피인용 문헌

  1. Numerical forced vibration analysis of compositionally gradient porous cylindrical microshells under moving load and thermal environment vol.40, pp.6, 2021, https://doi.org/10.12989/scs.2021.40.6.893
  2. Analysis of Seismic Action on the Tie Rod System in Historic Buildings Using Finite Element Model Updating vol.11, pp.10, 2017, https://doi.org/10.3390/buildings11100453