Ocean Systems Engineering

  • 제7권2호
  • /
  • Pages.107-120
  • /
  • 2017
  • /
  • 2093-6702(pISSN)
  • /
  • 2093-677X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Spud-can penetration depending on soil properties: Comparison between numerical simulation and physical model test

  • 투고 : 2017.04.03
  • 심사 : 2017.05.15
  • 발행 : 2017.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

Spud-can is used for fixing jack-up rig on seabed. It needs to be inserted up to the required depth during the installation process to secure enough soil reaction and prevent overturning accidents. On the other hand, it should be extracted from seabed soils as fast as possible during the extraction process to minimize the corresponding operational cost. To achieve such goals, spud-can may be equipped with water-jetting system including monitoring and control. To develop such a smart spud-can, a reliable numerical simulation tool is essential and it has also to be validated against physical model tests. In this regard, authors developed a numerical simulation tool by using a commercial program ANSYS with extended Drucker-Prager (EDP) formula. Authors also conducted small-scale (1/100) physical model tests for verification and calibration purpose. By using the numerical model, a systematic parametric study is conducted both for sand and K(kaolin)-clay with varying important soil parameters and the best estimated soil properties of the physical test are deduced. Then, by using the selected soil properties, the numerical and experimental results for a sand/K-clay multi-layer case are cross-checked to show reasonably good agreement. The validated numerical model will be useful in the next-stage study which includes controllable water-jetting.

키워드

과제정보

연구 과제 주관 기관 : Korea Ministry of Science, ICT and Future Planning

참고문헌

  1. ANSYS, Inc. (2012), ANSYS Mechanical APDL Material Reference, 47-57.
  2. Bienen, B., Gaudin, C. and Cassidy, M.J. (2009), "The influence of pull-out load on the efficiency of jetting during spudcan extraction", Appl. Ocean Res., 31, 202-211. https://doi.org/10.1016/j.apor.2009.09.001
  3. Det Norske Veritas AS (2012), Self-elevating Units.
  4. Duan, M., Zhao, J., Wang, J. and Song, L. (2013), "Jetting effect of jackup on actively punching through overlaid sand layer", J. Offshore Polar Eng., 23(1), 55-62.
  5. Gaudin, C., Cassidy, M.J., Bienen, B. and Hossain, M.S. (2011), "Recent contributions of geotechnical centrifuge modelling to the understanding of jack-up spudcan behavior", Ocean Eng., 38, 900-914. https://doi.org/10.1016/j.oceaneng.2010.12.001
  6. Han, D.S., Kim, S.J. and Kim, M.H. (2014), "Effect of plate slope and water jetting on the penetration depth of a jack-up spudcan for surficial sand", Ocean Syst. Eng., 4(4), 263-278. https://doi.org/10.12989/ose.2014.4.4.263
  7. Han, D.S., Kim, S.J. and Kim, M.H. (2015), "Effect of water jetting parameters on the behavior of a jack-up spudcan for surficial sand condition", Ocean Syst. Eng., 5(1), 1-19. https://doi.org/10.12989/ose.2015.5.1.001
  8. Hossain, M.S., Hu, Y., Randolph, M.F. and White, D.J. (2005), "Limiting cavity depth for spudcan foundations penetrating clay", Geotechnique, 55(9), 679-690. https://doi.org/10.1680/geot.2005.55.9.679
  9. Kai, S.U. and Yin, L.I. (2009), "Discussion of extended Drucker-Prager yield criterion in slope stability analysis", Proceeding of the Power and Energy Engineering Conference, 2009 APPEEC.
  10. Kara, E.M., Meghachou, M. and Aboubekr, N. (2013), "Contribution of particles size ranges to sand friction", Engineering, Technology & Applied Science Resarch (ETASR), 3(4), 497-501.
  11. Kellezi, L. and Stromann, H. (2003), "FEM analysis of jack-up spudcanpenetration for multi-layered critical soil conditions", Proceeding of the BGA International Conference on Foundations.
  12. Leung, C.F. (2005), "Challenges in offshore geotechnics in Southeast Asia", Proceedings of the 16thInternational Conference on Soil Mechanics and Geotechnical Engineering, 2005 ICSMGE.
  13. Purwana, O.A., Leung, C.F. and Chow, Y.K. (2006), "Breakout failure mechanism of jackup spudcan extraction", Proceedings of the 6th International Conference on Physical Modelling in Geotechnics, 2006 ICPMG.
  14. Qiu, G. and Grabe, J. (2012), "Numerical investigation of bearing capacity due to spudcan penetration in sand overlying clay", Canadian Geotech. J., 49, 1393-1407. https://doi.org/10.1139/t2012-085
  15. Tho, K.K., Leung, C.F., Chow, Y.K. and Swaddiwudhipong, S. (2012), "Eulerian finite-element technique for analysis of jack-up spudcanpenetration", Int. J. Geomech. - ASCE, 12(1), 64-73. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000111
  16. Yang, C.K. and Kim, M.H. (2011), "The structural safety assessment of a tie-down system on a tension leg platform during hurricane events", Ocean Syst. Eng., 1(4), 263-283. https://doi.org/10.12989/ose.2011.1.4.263
  17. Yu,L., Hu, Y., Liu, J., Randolph F.M. and Kong, X. (2012), "Numerical study of spudcanpenetration in loose sand overlying clay", J. Comput. Geotech., 46, 1-12. https://doi.org/10.1016/j.compgeo.2012.05.012
  18. Zhao, J., Duan, M., Cao, S., Hu, Z. and Song, L. (2011), "Prediction of spudcan penetration depth in multiple layers with sand overlying clay", J. Appl. Mech. Mater., 52-54, 995-1002. https://doi.org/10.4028/www.scientific.net/AMM.52-54.995