DOI QR코드

DOI QR Code

Probabilistic computation of the structural performance of moment resisting steel frames

  • 투고 : 2016.09.29
  • 심사 : 2017.04.12
  • 발행 : 2017.06.30

초록

This study investigates the reliability of the performance levels of moment resisting steel frames subjected to lateral loads such as wind and earthquake. The reliability assessment has been performed with respect to three performance levels: serviceability, damageability, and ultimate limit states. A four-story moment resisting frame is used as a typical example. In the reliability assessment the uncertainties in the loadings and in the capacity of the frame have been considered. The wind and earthquake loads are assumed to have lognormal distribution, and the frame resistance is assumed to have a normal distribution. In order to obtain an appropriate limit state function a linear relation between the loading and the deflection is formed. For the reliability analysis an algorithm has been developed for determination of limit state functions and iterations of the first order reliability method (FORM) procedure. By the method presented herein the multivariable analysis of a complicated reliability problem is reduced to an S-R problem. The procedure for iterations has been tested by a known problem for the purpose of avoiding convergence problems. The reliability indices for many cases have been obtained and also the effects of the coefficient of variation of load and resistance have been investigated.

키워드

참고문헌

  1. Ang, A.H.S. and Tang, W.H. (2007), Probability Concepts in Engineering Emphasis on Applications to Civil and Environmental Engineering, (2nd Edition), John Wiley and Sons, New York, NY, USA.
  2. Applied Technology Council (ATC) (1997), NEHRP Guidelines for Seismic Rehabilitation of Buildings; Report No. FEMA-273, Federal Emergency Management Agency, Washington, DC, USA.
  3. ASCE/SEI 7-10 (2010), Minimum Design Loads for Buildings and Other Structures; Structural Engineering Institute of ASCE, Reston, VA, USA.
  4. Asgarian, B., Golsefidi, E.S. and Shokrgozar, H.R. (2016), "Probabilistic seismic evaluation of buckling restrained braced frames using DCFD and PSDA methods", Earthq. Struct., Int. J., 10(1), 105-123. https://doi.org/10.12989/eas.2016.10.1.105
  5. Basha, B.M. and Babu, G.L.S. (2009), "Optimum design for external seismic stability of geosynthetic reinforced soil walls: Reliability based approach", J. Geotech. Geoenviron. Eng. ASCE, 136(6), 797-812. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000289
  6. Basha, B.M. and Babu, G.L.S. (2014), "Reliability-based load and resistance factor design approach for external seismic stability of reinforced soil walls", Soil Dyn. Earthq. Eng., 60, 8-21. https://doi.org/10.1016/j.soildyn.2014.01.013
  7. Bigaud, D. and Ali, O. (2014), "Time-variant flexural reliability of RC beams with externally bonded CFRP under combined fatigue-corrosion actions", Reliab. Eng. Syst. Saf., 131, 257-270. https://doi.org/10.1016/j.ress.2014.04.016
  8. Chen, X. and Lind, N.C. (1983), "Fast probability integration by three-parameter normal tail approximation", Struct. Saf., 1(4), 269-276. https://doi.org/10.1016/0167-4730(82)90003-0
  9. Choe, D.E., Gardoni, P., Rosowsky, D. and Haukaas, T. (2008), "Probabilistic capacity models and seismic fragility estimates for RC columns subject to corrosion", Reliab. Eng. Syst. Saf., 93(3), 383-393. https://doi.org/10.1016/j.ress.2006.12.015
  10. DBYBHY-2007 (2007), Turkish Seismic Design Code for Buildings, Specification for Structures to be built in Disaster Areas; Institute of Turkish Standard, Ankara, Turkey.
  11. Ellingwood, B., Galambos, T.V., MacGregor, J.G. and Cornell, C.A. (1980), Development of probability based load criterion for American National Standard A58; NBS Special Publication 577, National Bureau of Standards, United States Department of Commerce, Washington, DC, USA.
  12. Ellingwood, B.R. and Kanda, J. (Editors) (2005), Structural Safety and its Quality Assurance, ASCE, VA, USA.
  13. Englekirk, R. (1994), Steel Structures Controlling Behavior Through Design; John Wiley and Sons, New York, NY, USA.
  14. ENV1993-1-1 (1993), Eurocode 3, Design of steel structures - Part 1-1: General rules and rules for buildings.
  15. Faggella, M., Barbosa, A.R., Conte, J.P., Spacone, E. and Restrepo, J.I. (2013), "Probabilistic seismic response analysis of a 3-D reinforced concrete building", Struct. Saf., 44, 11-27. https://doi.org/10.1016/j.strusafe.2013.04.002
  16. FEMA-350 (2000), Recommended seismic design criteria for new steel moment frame buildings; FEMA-273, Federal Emergency Management Agency, Washington, DC, USA.
  17. Geschwindner, L.F. (2008), Unified Design of Steel Structures, John Wiley and Sons, NJ, USA.
  18. Ghali, A., Neville, A.M. and Brown, T.G. (2009), Structural Analysis a Unified Classical and Matrix Approach, (6th Edition), Taylor and Francis, New York, NY, USA.
  19. Ghobarah, A. (2001), "Performance-based design in earthquake engineering: State of development", Eng. Struct., 23(8), 878-884. https://doi.org/10.1016/S0141-0296(01)00036-0
  20. Grecea, D., Dinu, F. and Dubina, D. (2004), "Performance criteria for MR steel frames in seismic zones", J. Constr. Steel Res., 60(3), 739-749. https://doi.org/10.1016/S0143-974X(03)00140-8
  21. Haldar, A. and Mahadevan, S. (2000), Probability, Reliability and Statistical Methods in Engineering Design, John Wiley and Sons, New York, NY, USA.
  22. Hasofer, A.M. and Lind, N.C. (1974), "An exact and invariant first-order reliability format", J. Eng. Mech. Div. (ASCE), 100, 111-121.
  23. Kanda, J., Iwasaki, R., Kobayashi, H. and Ellingwood, B.R. (1997), "Probability-based seismic safety evaluation of existing buildings", Eng. Struct., 19(9), 708-717. https://doi.org/10.1016/S0141-0296(96)00155-1
  24. Kia, M. and Banazadeh, M. (2016), "Closed-form fragility analysis of the steel moment resisting frames", Steel Compos. Struct., Int. J., 21(1), 93-107. https://doi.org/10.12989/scs.2016.21.1.093
  25. Kozak, D.L. and Liel, A.B. (2015), "Reliability of steel roof structures under snow loads", Struct. Saf., 54, 46-56. https://doi.org/10.1016/j.strusafe.2015.02.004
  26. Low, H.Y. and Hao, H. (2000), "Reliability analysis of reinforced concrete slabs under explosive loading", Struct. Saf., 23(2), 157-178. https://doi.org/10.1016/S0167-4730(01)00011-X
  27. Mahsuli, M. and Haukaas, T. (2013), "Seismic risk analysis with reliability methods, part I: Models", Struct. Saf., 42, 54-62. https://doi.org/10.1016/j.strusafe.2013.01.003
  28. Melchers, R.E. (1999/2002), Structural Reliability Analysis and Prediction, (2nd Edition), John Wiley and Sons, Chichester, UK.
  29. Muscolino, G., Santoro, R. and Sofi, A. (2015), "Explicit reliability sensitivities of linear structures with interval uncertainties under stationary stochastic excitation", Struct. Saf., 52, 219-232. https://doi.org/10.1016/j.strusafe.2014.03.001
  30. Nataf, A. (1962), "Determination des distributions de probabilites dont les marges sont donnees", C. R. Acad. Sci., 225, 42-43.
  31. Neves, R.A., Chateauneuf, A., Venturini, W.S. and Lemaire, M. (2006), "Reliability analysis of reinforced concrete grids with nonlinear material behavior", Reliab. Eng. Syst. Saf., 91(6), 735-744. https://doi.org/10.1016/j.ress.2005.07.002
  32. O'Reilly, G.J. and Sullivan, T.J. (2016), "Fragility functions for eccentrically braced steel frame structures", Earthq. Struct., Int. J., 10(2), 367-388. https://doi.org/10.12989/eas.2016.10.2.367
  33. Petryna, Y.S., Pfanner, D., Stangenberg, F. and Kratzig, W.B. (2002), "Reliability of reinforced concrete structures under fatigue", Reliab. Eng. Syst. Saf., 77(3), 253-261. https://doi.org/10.1016/S0951-8320(02)00058-3
  34. Quan, Q. and Gengwei, Z. (2002), "Calibration of reliability index of RC beams for serviceability limit state of maximum crack width", Reliab. Eng. Syst. Saf., 75(3), 359-366. https://doi.org/10.1016/S0951-8320(01)00133-8
  35. Rackwitz, R. and Fiessler, B. (1978), "Structural reliability under combined random load sequences", Comput. Struct., 9(5), 489-494. https://doi.org/10.1016/0045-7949(78)90046-9
  36. Romao, X., Delgado, R. and Costa, A. (2011), "Assessment of the statistical distributions of structural demand under earthquake loading", J. Earthq. Eng., 15(5), 724-753. https://doi.org/10.1080/13632469.2010.539296
  37. Rosenblatt, M. (1952), "Remarks on a multivariate transformation", Ann. Math. Stat., 23(3), 470-472. https://doi.org/10.1214/aoms/1177729394
  38. Schneider, J. (2006), Introduction to Safety and Reliability of Structures. Structural Engineering Documents No. 5; (2nd Ed.), IABSE, Zurich, Switzerland.
  39. Sudret, B. (2008), "Probabilistic models for the extent of damage in degrading reinforced concrete structures", Reliab. Eng. Syst. Saf., 93(3), 410-422. https://doi.org/10.1016/j.ress.2006.12.019
  40. Tandjiria, V., The C.I., and Low, B.K. (2000), "Reliability analysis of laterally loaded piles using response surface methods", Struct. Saf., 22(4), 335-355. https://doi.org/10.1016/S0167-4730(00)00019-9
  41. TS498 (1997), Design loads for buildings, Institute of Turkish Standards; Ankara, Turkey.