DOI QR코드

DOI QR Code

Numerical analysis of tilted angle shear connectors in steel-concrete composite systems

  • Khorramian, Koosha (Department of Civil Engineering, Sharif University of Technology) ;
  • Maleki, Shervin (Department of Civil Engineering, Sharif University of Technology) ;
  • Shariati, Mahdi (Faculty of Civil Engineering, University of Tabriz) ;
  • Jalali, Abdolrahim (Faculty of Civil Engineering, University of Tabriz) ;
  • Tahir, M.M. (UTM Construction Research Centre, Faculty of Civil Engineering, Institute for Smart Infrastructure and Innovative Construction, UTM)
  • 투고 : 2016.08.04
  • 심사 : 2016.12.11
  • 발행 : 2017.01.20

초록

This study investigates numerically the behavior of tilted angle shear connectors embedded in solid concrete slabs. Two different tilted angle connectors were used, titled angle with 112.5 and 135 degrees between the angle leg and steel beam flange. A nonlinear finite element model was developed to simulate and validate the experimental push-out tests. Parametric studies were performed to investigate the variations in concrete strength and connector's dimensions. The results indicate that the ultimate strength of a tilted angle shear connector is directly related to the square root of the concrete compressive strength. The effects of variations in the geometry of tilted angle connectors on the shear capacity are discussed in details. Based on the numerical analyses, two equations are proposed to estimate the ultimate capacity of tilted angle shear connectors of 112.5 and 135 degrees in the defined range of parameters.

키워드

과제정보

연구 과제 주관 기관 : University of Tabriz

참고문헌

  1. Abdul Awal, A.S. (1988), "Failure mechanism of prepacked concrete", J. Struct. Eng., 114(3), 727-732. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:3(727)
  2. Abdul Awal, A.S. (1992), "Creep recovery of prepacked aggregate concrete", J. Mater. Civil Eng., 4(3), 320-325. https://doi.org/10.1061/(ASCE)0899-1561(1992)4:3(320)
  3. Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2010), "Investigation of seismic behaviour of composite structures with concrete filled square steel tubular (CFSST) column by push-over and time-history analyses", Proceedings of the 4th International Conference on Steel and Composite Structures, Sydney, Australia, July.
  4. Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2011), "Behavior of through beam connections composed of CFSST columns and steel beams by finite element studying", Adv. Mater. Res., 168, 2329-2333.
  5. Choi, S.M., Tateishi, K., Uchida, D., Asano, K. and Kobayashi, K. (2008), "Fatigue strength of angle shape shear connector used in steel-concrete composite slab", Int. J. Steel Struct., 8(3), 199-204.
  6. Cornelissen, H., Hordijk, D. and Reinhardt, H. (1986), "Experimental determination of crack softening characteristics of normalweight and lightweight concrete", HERON, 31(2), 1986.
  7. Daie, M., Jalali, A., Suhatril, M., Shariati, M., Arabnejad, Khanouki, M.M., Shariati, A. and Kazemi Arbat, P. (2011), "A new finite element investigation on pre-bent steel strips as damper for vibration control", Int. J. Phys. Sci., 6(36), 8044-8050.
  8. Ellobody, E. and, Lam, D. (2002), "Modeling of headed stud in steel-precast composite beams", Steel Compos. Struct., Int. J., 2(5), 355-378. https://doi.org/10.12989/scs.2002.2.5.355
  9. Faella, C., Martinelli, E. and Nigro, E. (2002), "Steel and concrete composite beams with flexible shear connection: "exact" analytical expression of the stiffness matrix and applications", Comput. Struct., 80(11), 1001-1009. https://doi.org/10.1016/S0045-7949(02)00038-X
  10. Hafizah, N.A.K., Bhutta, M.A.R., Jamaludin, M.Y., Warid, M.H., Ismail, M., Rahman, M.S., Yunus, I. and Azman, M. (2014), "Kenaf fiber reinforced polymer composites for strengthening RC beams", J. Adv. Concrete Technol., 12(6), 167-177. https://doi.org/10.3151/jact.12.167
  11. Hillerborg, A., Modeer, M. and Petersson, P.-E. (1976), "Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements", Cement Concrete Res., 6(6), 773-781. https://doi.org/10.1016/0008-8846(76)90007-7
  12. Hossain, M. and Awal, A.A. (2011), "Experimental validation of a theoretical model for flexural modulus of elasticity of thin cement composite", Construct. Build. Mater., 25(3), 1460-1465. https://doi.org/10.1016/j.conbuildmat.2010.09.018
  13. Institution, B.S. (2004), Eurocode 2: Design of Concrete Structures: Part 1-1: General Rules and Rules for Buildings, British Standards Institution.
  14. Khalilian, M. (2013), "The assessment of shear capacity of angle shear connectors", Master; Sharif University of Technology.
  15. Khorramian, K., Maleki, S., Shariati, M. and Ramli Sulong, N.H. (2015), "Behavior of tilted angle shear connectors", PLoS ONE, 10(12), e0144288. https://doi.org/10.1371/journal.pone.0144288
  16. Kwak, H.-G. and Hwang, J.-W. (2010), "FE model to simulate bond-slip behavior in composite concrete beam bridges", Comput. Struct., 88(17-18), 973-984. https://doi.org/10.1016/j.compstruc.2010.05.005
  17. Lam, D. and EI-Lobody, E. (2001), "Finite element modelling of headed stud shear connectors in steel-concrete composite beam", Elsevier Science Ltd.
  18. Lam, D. and El-Lobody, E. (2005), "Behavior of headed stud shear connectors in composite beam", J. Struct. Eng., 131, 96-107. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:1(96)
  19. Loh, H., Uy, B. and Bradford, M. (2006), "The effects of partial shear connection in composite flush end plate joints Part I--experimental study", J. Construct. Steel Res., 62(4), 378-390. https://doi.org/10.1016/j.jcsr.2005.07.012
  20. Maleki, S. (2002), "Effect of deck and support stiffness on seismic response of slab-girder bridges", Eng. Struct., 24(2), 219-226. https://doi.org/10.1016/S0141-0296(01)00084-0
  21. Maleki, S. and Bagheri, S. (2008a), "Behavior of channel shear connectors, Part I: Experimental study", J. Construct. Steel Res., 64(12), 1333-1340. https://doi.org/10.1016/j.jcsr.2008.01.010
  22. Maleki, S. and Bagheri, S. (2008b), "Behavior of channel shear connectors, Part II: Analytical study", J. Construct. Steel Res., 64(12), 1341-1348. https://doi.org/10.1016/j.jcsr.2008.01.006
  23. Maleki, S. and Mahoutian, M. (2009), "Experimental and analytical study on channel shear connectors in fiber-reinforced concrete", J. Construct. Steel Res., 65(8-9), 1787-1793. https://doi.org/10.1016/j.jcsr.2009.04.008
  24. Mirza, O. and Uy, B. (2009), "Behaviour of headed stud shear connectors for composite steel-concrete beams at elevated temperatures", J. Construct. Steel Res., 65(3), 662-674. https://doi.org/10.1016/j.jcsr.2008.03.008
  25. Muhammad, B., Ismail, M., Bhutta, M.A.R. and Abdul-Majid, Z. (2012), "Influence of non-hydrocarbon substances on the compressive strength of natural rubber latex-modified concrete", Construct. Build. Mater., 27(1), 241-246. https://doi.org/10.1016/j.conbuildmat.2011.07.054
  26. Muhammad, N.Z., Keyvanfar, A., Majid, M.Z.A., Shafaghat, A. and Mirza, J. (2015), "Waterproof performance of concrete: A critical review on implemented approaches", Construct. Build. Mater., 101, 80-90. https://doi.org/10.1016/j.conbuildmat.2015.10.048
  27. Muhammad, N.Z., Shafaghat, A., Keyvanfar, A., Majid, M.Z.A., Ghoshal, S., Yasouj, S.E.M., Ganiyu, A.A., Kouchaksaraei, M.S., Kamyab, H. and Taheri, M.M. (2016), "Tests and methods of evaluating the self-healing efficiency of concrete: A review", Construct. Build. Mater., 112, 1123-1132. https://doi.org/10.1016/j.conbuildmat.2016.03.017
  28. Nakajima, A., Saiki, I., Kokai, M., Doi, K., Takabayashi, Y. and Ooe, H. (2003), "Cyclic shear force-slip behavior of studs under alternating and pulsating load condition", Eng. Struct., 25(5), 537-545. https://doi.org/10.1016/S0141-0296(02)00165-7
  29. Oguejiofor, E. and Hosain, M. (1997), "Numerical analysis of push-out specimens with perfobond rib connectors", Comput. Struct., 62(4), 617-624. https://doi.org/10.1016/S0045-7949(96)00270-2
  30. Razaqpur, A.G. and Nofal, M. (1989), "A finite element for modelling the nonlinear behavior of shear connectors in composite structures", Comput. Struct., 32(1), 169-174. https://doi.org/10.1016/0045-7949(89)90082-5
  31. Safa, M., Shariati, M., Ibrahim, Z., Toghroli, A., Baharom, S.B., Nor, N.M. and Petkovic, D. (2016), "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steelconcrete composite beam's shear strength", Steel Compos. Struct., Int. J., 21(3), 679-688. https://doi.org/10.12989/scs.2016.21.3.679
  32. Shah, S., Sulong, N.R., Shariati, M., Khan, R. and Jumaat, M. (2016), "Behavior of steel pallet rack beam-to-column connections at elevated temperatures", Thin-Wall. Struct., 106, 471-483. https://doi.org/10.1016/j.tws.2016.05.021
  33. Shariati, A. and Schumacher, T. (2015), "Oversampling in virtual visual sensors as a means to recover higher modes of vibration, 41st Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 34, AIP Publishing.
  34. Shariati, A. and Schumacher, T. (2016), "Eulerian-based virtual visual sensors to measure dynamic displacements with subpixel accuracy of structures and mechanical systems", J. Struct. Control Health Monitor.
  35. Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2012a), "Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Mater. Des., 34, 325-331. https://doi.org/10.1016/j.matdes.2011.08.008
  36. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad, M.M.K. and Sinaei, H. (2012b), "Behaviour of Cshaped angle shear connectors under monotonic and fully reversed cyclic loading: An experimental study", Mater. Des., 41, 67-73. https://doi.org/10.1016/j.matdes.2012.04.039
  37. Shariati, M., Ramli Sulong, N., Suhatril, M., Shariati A., Arabnejad Khanouki, M. and Sinaei, H. (2012c), "Fatigue energy dissipation and failure analysis of channel shear connector embedded in the lightweight aggregate concrete in composite bridge girders", Proceedings of the 5th International Conference on Engineering Failure Analysis, The Hague, The Netherlands, July.
  38. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2013), "Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading", Construct. Build. Mater., 38, 582-593. https://doi.org/10.1016/j.conbuildmat.2012.07.050
  39. Shariati, A., Shariati, M., Ramli Sulong, N.H., Suhatril, M., Arabnejad Khanouki, M.M. and Mahoutian, M. (2014), "Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Construct. Build. Mater., 52, 276-283. https://doi.org/10.1016/j.conbuildmat.2013.11.036
  40. Shariati, M., Ramli Sulong, N.H., Shariati, A. and Khanouki, M.A. (2015a), "Behavior of V-shaped angle shear connectors: experimental and parametric study", Mater. Struct., 1-18.
  41. Shariati, A., Schumacher, T. and Ramanna, N. (2015b), "Eulerianbased virtual visual sensors to detect natural frequencies of structures", J. Civil Struct. Health Monitor., 5(4), 457-468. https://doi.org/10.1007/s13349-015-0128-5
  42. Shehu, I. and Awal, A. (2012), "Mechanical properties of concrete incorporating high volume palm oil fuel ash", Adv. Mater. Res., 599, Trans Tech Publications.
  43. Slutter, R. and Driscoll, G.C. (1965), "Flexural strength of steel and concrete composite beams", J. Struct. Eng., ASCE, 71-99.
  44. Soltani, M., Topa, A., Karim, M.R. and Sulong, N.R. (2016), "Crashworthiness of G4 (2W) guardrail system: a finite element parametric study", Int. J. Crashworth., 1-21.
  45. Tahmasbi, F., Maleki, S., Shariati, M., Ramli Sulong, N.H. and Tahir, M.M. (2016), "Shear capacity of C-shaped and L-shaped angle shear connectors", PLOS ONE, 11(8), e0156989. https://doi.org/10.1371/journal.pone.0156989
  46. Toghroli, A., Suhatril, M., Ibrahim, Z., Safa, M., Shariati M. and Shamshirband, S. (2016), "Potential of soft computing approach for evaluating the factors affecting the capacity of steel-concrete composite beam", J. Intel. Manuf., 1-9.
  47. Toghrolia, A., Mohammadhassani, M., Shariatib, M., Suhatrilc, M., Ibrahimd, Z. and Sulong, N.H.R. (2014), "Prediction of shear capacity of channel shear connectors using the ANFIS model", Steel Compos. Struct., Int. J., 17(5), 623-639. https://doi.org/10.12989/scs.2014.17.5.623
  48. Walker, C., Miller, T., Gupta, R., Shariati, A. and Schumacher, T. (2016), "Development of virtual visual sensors applications to wood structural health monitoring", ASTM J. Test. Eval.
  49. Wang, A.J. and Chung, K.F. (2008), "Advanced finite element modelling of perforated composite beams with flexible shear connectors", Eng. Struct., 30(10), 2724-2738. https://doi.org/10.1016/j.engstruct.2008.03.001
  50. Yahya Kasim Al-Darzi, S. and Chen, A. (2006), "Development of hybrid bridges: State of arts and conceptual design", J. Appl. Sci., 6(13), 2799-2803. https://doi.org/10.3923/jas.2006.2799.2803
  51. Yan, J.-B., Liew, J.R., Zhang, M.-H. and Sohel, K. (2015), "Experimental and analytical study on ultimate strength behavior of steel-concrete-steel sandwich composite beam structures", Mater. Struct., 48(5), 1523-1544. https://doi.org/10.1617/s11527-014-0252-4

피인용 문헌

  1. Dynamic mix design optimization of high-performance concrete vol.29, pp.1, 2017, https://doi.org/10.12989/scs.2018.29.1.067
  2. Evaluation of the parameters affecting the Schmidt rebound hammer reading using ANFIS method vol.21, pp.5, 2018, https://doi.org/10.12989/cac.2018.21.5.525
  3. Buckling analysis of tapered BDFGM nano-beam under variable axial compression resting on elastic medium vol.66, pp.6, 2017, https://doi.org/10.12989/sem.2018.66.6.737
  4. Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake vol.28, pp.4, 2017, https://doi.org/10.12989/scs.2018.28.4.439
  5. Strengthening of bolted shear joints in industrialized ferrocement construction vol.28, pp.6, 2017, https://doi.org/10.12989/scs.2018.28.6.681
  6. Application of ANFIS technique on performance of C and L shaped angle shear connectors vol.22, pp.3, 2018, https://doi.org/10.12989/sss.2018.22.3.335
  7. Portland cement structure and its major oxides and fineness vol.22, pp.4, 2017, https://doi.org/10.12989/sss.2018.22.4.425
  8. Practical use of computational building information modeling in repairing and maintenance of hospital building- case study vol.22, pp.5, 2017, https://doi.org/10.12989/sss.2018.22.5.575
  9. Computational optimized finite element modelling of mechanical interaction of concrete with fiber reinforced polymer vol.23, pp.1, 2017, https://doi.org/10.12989/cac.2019.23.1.061
  10. An experimental study on the effect of CFRP on behavior of reinforce concrete beam column connections vol.30, pp.5, 2017, https://doi.org/10.12989/scs.2019.30.5.433
  11. Numerical simulation of Y-type perfobond rib shear connectors using finite element analysis vol.31, pp.1, 2019, https://doi.org/10.12989/scs.2019.31.1.053
  12. Moment-rotation prediction of precast beam-to-column connections using extreme learning machine vol.70, pp.5, 2017, https://doi.org/10.12989/sem.2019.70.5.639
  13. Intelligent design of retaining wall structures under dynamic conditions vol.31, pp.6, 2017, https://doi.org/10.12989/scs.2019.31.6.629
  14. The effect of wollastonite powder with pozzolan micro silica in conventional concrete containing recycled aggregate vol.24, pp.4, 2017, https://doi.org/10.12989/sss.2019.24.4.541
  15. Application of waste tire rubber aggregate in porous concrete vol.24, pp.4, 2017, https://doi.org/10.12989/sss.2019.24.4.553
  16. Application of Extreme Learning Machine (ELM) and Genetic Programming (GP) to design steel-concrete composite floor systems at elevated temperatures vol.33, pp.3, 2017, https://doi.org/10.12989/scs.2019.33.3.319
  17. Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete vol.8, pp.3, 2017, https://doi.org/10.12989/acc.2019.8.3.225
  18. Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings vol.33, pp.4, 2019, https://doi.org/10.12989/scs.2019.33.4.569
  19. Comparison of dynamic behavior of shallow foundations based on pile and geosynthetic materials in fine-grained clayey soils vol.19, pp.6, 2017, https://doi.org/10.12989/gae.2019.19.6.473
  20. Strain rate effects on soil-geosynthetic interaction in fine-grained soil vol.19, pp.6, 2017, https://doi.org/10.12989/gae.2019.19.6.533
  21. Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS) vol.34, pp.1, 2017, https://doi.org/10.12989/scs.2020.34.1.155
  22. Depiction of concrete structures with seismic separation under faraway fault earthquakes vol.9, pp.1, 2020, https://doi.org/10.12989/acc.2020.9.1.071
  23. Evaluating the impacts of using piles and geosynthetics in reducing the settlement of fine-grained soils under static load vol.20, pp.2, 2017, https://doi.org/10.12989/gae.2020.20.2.087
  24. Hybrid ANN-based techniques in predicting cohesion of sandy-soil combined with fiber vol.20, pp.3, 2017, https://doi.org/10.12989/gae.2020.20.3.191
  25. Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines vol.34, pp.3, 2017, https://doi.org/10.12989/scs.2020.34.3.347
  26. Numerical study on the axial compressive behavior of built-up CFT columns considering different welding lines vol.34, pp.3, 2017, https://doi.org/10.12989/scs.2020.34.3.377
  27. The effect of RBS connection on energy absorption in tall buildings with braced tube frame system vol.34, pp.3, 2017, https://doi.org/10.12989/scs.2020.34.3.393
  28. Optimizing reinforced concrete beams under different load cases and material mechanical properties using genetic algorithms vol.34, pp.4, 2020, https://doi.org/10.12989/scs.2020.34.4.467
  29. Prediction of concrete strength in presence of furnace slag and fly ash using Hybrid ANN-GA (Artificial Neural Network-Genetic Algorithm) vol.25, pp.2, 2017, https://doi.org/10.12989/sss.2020.25.2.183
  30. Computational estimation of the earthquake response for fibre reinforced concrete rectangular columns vol.34, pp.5, 2017, https://doi.org/10.12989/scs.2020.34.5.743
  31. Elevated temperature resistance of concrete columns with axial loading vol.9, pp.4, 2017, https://doi.org/10.12989/acc.2020.9.4.355
  32. Computational analysis of three dimensional steel frame structures through different stiffening members vol.35, pp.2, 2017, https://doi.org/10.12989/scs.2020.35.2.187
  33. Monotonic behavior of C and L shaped angle shear connectors within steel-concrete composite beams: an experimental investigation vol.35, pp.2, 2017, https://doi.org/10.12989/scs.2020.35.2.237
  34. Performance assessment of buckling restrained brace with tubular profile vol.8, pp.4, 2020, https://doi.org/10.12989/anr.2020.8.4.323
  35. Computational earthquake performance of plan-irregular shear wall structures subjected to different earthquake shock situations vol.18, pp.5, 2020, https://doi.org/10.12989/eas.2020.18.5.567
  36. Analysis of extended end plate connection equipped with SMA bolts using component method vol.36, pp.2, 2020, https://doi.org/10.12989/scs.2020.36.2.213
  37. Investigation on the monotonic behavior of the steel rack upright-beam column connection vol.26, pp.1, 2017, https://doi.org/10.12989/sss.2020.26.1.103
  38. A model to develop the porosity of concrete as important mechanical property vol.26, pp.2, 2017, https://doi.org/10.12989/sss.2020.26.2.147
  39. Experimental study and finite element analysis of PVC-CFRP confined concrete column – Ring beam joint subjected to eccentric compression vol.254, pp.None, 2017, https://doi.org/10.1016/j.conbuildmat.2020.119081
  40. Indirect measure of shear strength parameters of fiber-reinforced sandy soil using laboratory tests and intelligent systems vol.22, pp.5, 2017, https://doi.org/10.12989/gae.2020.22.5.397
  41. Performance of composite frame consisting of steel beams and concrete filled tubes under fire loading vol.36, pp.5, 2017, https://doi.org/10.12989/scs.2020.36.5.587
  42. Experimentally and Numerically Investigating the Performances of Aramid Fiber-Reinforced Steel Beams Under Impact Loadings vol.45, pp.10, 2017, https://doi.org/10.1007/s13369-020-04608-1
  43. Influence of porosity and cement grade on concrete mechanical properties vol.10, pp.5, 2017, https://doi.org/10.12989/acc.2020.10.5.393
  44. Effect of shear connectors on strength of structural sandwich panels vol.2, pp.12, 2017, https://doi.org/10.1007/s42452-020-03754-3
  45. Application of discrete element method (DEM) in characterization of bond-slip behavior in RC beams with confinement subjected to corrosion vol.28, pp.None, 2017, https://doi.org/10.1016/j.istruc.2020.10.026
  46. Research on shear distribution of perfobond connector groups with rubber rings vol.38, pp.4, 2021, https://doi.org/10.12989/scs.2021.38.4.399
  47. Numerical investigation of the dynamic responses of steel-concrete girder bridges subjected to moving vehicular loads vol.54, pp.3, 2017, https://doi.org/10.1177/0020294020981406
  48. Investigations on shear capacity of steel plates with local opening vol.179, pp.None, 2017, https://doi.org/10.1016/j.jcsr.2020.106518
  49. Assessment of microstructure and surface effects on vibrational characteristics of public transportation vol.11, pp.1, 2021, https://doi.org/10.12989/anr.2021.11.1.101
  50. Smart estimation of automatic approach in enhancing the road safety under AASHTO Standard specification and STM vol.79, pp.3, 2021, https://doi.org/10.12989/sem.2021.79.3.389
  51. Experimental study of reversal of multidrug resistance in human leukemia K562/DOX cells by toad venom vol.11, pp.2, 2017, https://doi.org/10.12989/anr.2021.11.2.219
  52. Application of multi-hybrid metaheuristic algorithm on prediction of split-tensile strength of shear connectors vol.28, pp.2, 2017, https://doi.org/10.12989/sss.2021.28.2.167
  53. Analytical model for the basement wall horizontally supported by flexible floor diaphragms vol.79, pp.5, 2017, https://doi.org/10.12989/sem.2021.79.5.601
  54. Analyzing shear strength of steel-concrete composite beam with angle connectors at elevated temperature using finite element method vol.40, pp.6, 2017, https://doi.org/10.12989/scs.2021.40.6.853
  55. Experimental and numerical studies on novel stiffener-enhanced steel-concrete-steel sandwich panels subjected to impact loading vol.45, pp.None, 2022, https://doi.org/10.1016/j.jobe.2021.103479