DOI QR코드

DOI QR Code

Rotational capacity of pre-damaged I-section steel beams at elevated temperatures

  • Pantousa, Daphne (Laboratory of Structural Analysis and Design, Department of Civil Engineering, University of Thessaly) ;
  • Mistakidis, Euripidis (Laboratory of Structural Analysis and Design, Department of Civil Engineering, University of Thessaly)
  • 투고 : 2015.09.12
  • 심사 : 2016.12.08
  • 발행 : 2017.01.20

초록

Structures submitted to Fire-After-Earthquake loading situations, are first experiencing inelastic deformations due to the seismic action and are then submitted to the thermal loading. This means that in the case of steel framed structures, at the starting point of the fire, plastic hinges have already been formed at the ends of the beams. The basic objective of this paper is the evaluation of the rotational capacity of steel I-section beams damaged due to prior earthquake loading, at increased temperatures. The study is conducted numerically and three-dimensional models are used in order to capture accurately the nonlinear behaviour of the steel beams. Different levels of earthquake-induced damage are examined in order to study the effect of the initial state of damage to the temperature-evolution of the rotational capacity. The study starts with the reference case where the beam is undamaged and in the sequel cyclic loading patterns are taken into account, which represent earthquakes loads of increasing magnitude. Additionally, the study extends to the evaluation of the ultimate plastic rotation of the steel beams which corresponds to the point where the rotational capacity of the beam is exhausted. The aforementioned value of rotation can be used as a criterion for the determination of the fire-resistance time of the structure in case of Fire-After-Earthquake situations.

키워드

참고문헌

  1. Della Corte, G., Landolfo, R. and Mazzolani, F.M. (2003), "Postearthquake fire resistance of moment resisting steel frames", Fire Safety J., 38(7), 593-612. https://doi.org/10.1016/S0379-7112(03)00047-X
  2. Dharma, R. and Tan, K.H. (2007a), "Rotational capacity of steel Ibeams under fire conditions Part I: Experimental study", Eng. Struct., 29(9), 2391-2402. https://doi.org/10.1016/j.engstruct.2006.11.031
  3. Dharma, R. and Tan, K.H. (2007b), "Rotational capacity of steel Ibeams under fire conditions Part II: Numerical simulations", Eng. Struct., 29(9), 2403-2418. https://doi.org/10.1016/j.engstruct.2006.11.030
  4. Eurocode 8 (2004), Design of Structures for Earthquake Resistance - Part 1: General rules seismic actions and rules for buildings, Brussels, Belgium.
  5. Eurocode 3 (2003), Design of Steel Structures - Part 1-2: General Rules - Structural fire design, Brussels, Belgium.
  6. Faggiano, B. and Mazzolani, F.M. (2011), "Fire after earthquake robustness evaluation and design: Application to steel structures", Steel Constr. Des. Res., 4(3), 183-187. https://doi.org/10.1002/stco.201110025
  7. Faggiano, B., Espoto, M., Mazzolani, F.M. and Landolfo, R. (2007), "Fire analysis of steel portal frames damaged after earthquake according to performance based design", Urban Habitat Constructions under Catastrophic Events, Cost C26, Workshop, Prague, Czech Republic.
  8. Faggiano, B., Espoto, M., Zaharia, R. and Pintea, D. (2008), "Structural analysis in case of fire after earthquake", Urban Habitat Constructions under Catastrophic Events, Cost Action C26, Malta University, Malta.
  9. Franssen, J.M. and Vila Real, P. (2010), Fire Design of Steel Structures, ECCS Eurocode Design Manuals, (1st Ed.), Ernst & Sohn - A Wiley Company.
  10. Gioncu, V. and Mazzolani, F. (2002), Ductility of Seismic Resistant Steel Structures, Spon Press, New York, NY, USA.
  11. Gioncu, V. and Petcu, D. (2007), "Available rotational capacity of wide flange beams and beam-columns Part 1. Theoretical approaches", J. Constr. Steel Res., 43(1), 161-217. https://doi.org/10.1016/S0143-974X(97)00044-8
  12. Keller, W. (2012), "Thermomechanical response of steel momentframe beam-column connections during post-earthquake Fire Exposure", Ph.D. Dissertation; Lehigh University, Bethlehem, PA, USA.
  13. Keller, W. and Pessiki, S. (2012), "Effect of earthquake-induced damage to spray-applied fire-resistive insulation on the response of steel moment-frame beam-column connections during fire exposure", J. Fire Prot. Eng., 22(4), 271-299. https://doi.org/10.1177/1042391512461126
  14. Kodur, V. and Dwaikat, M. (2009), "Response of steel beamcolumns exposed to fire", Eng. Struct., 31(2), 369-379. https://doi.org/10.1016/j.engstruct.2008.08.020
  15. Lee, S., Davidson, R., Ohnishi, N. and Scawthorn, C. (2008), "Fire following earthquake - Reviewing the state-of-the-art of modeling", Earthq. Spectra, 24(4), 933-967. https://doi.org/10.1193/1.2977493
  16. MSC Software Corporation (2010), MSC Marc Volume A: Theory and User Information, USA.
  17. Poh, K.W. (2001), "Stress-strain temperature relationship for structural steel", J. Mater. Civil Eng., 13(5), 371-379. https://doi.org/10.1061/(ASCE)0899-1561(2001)13:5(371)
  18. Scawthorn, C., Eidinger, J.M. and Schiff, A. (2005), "Fire following earthquake", Technical Council on Lifeline Earthquake Engineering Monograph 26: 345, American Society of Civil Engineers, Reston, VA, USA.
  19. Yassin, H., Iqbal, F., Bagchi, A. and Kodur, V.K.R. (2008), "Assessment of post-earthquake fire performance of steel-frame buildings", Proceedings of 14th World Conference on Earthquake Engineering, Beijing, China, October.
  20. Zaharia, R. and Pintea, D. (2009), "Fire after earthquake analysis of steel moment resisting frames", Int. J. Steel Struct., 9(4), 275-284. https://doi.org/10.1007/BF03249501
  21. Zaharia, R., Pintea, D. and Dubina, D. (2008) "Fire after earthquake- a natural fire approach", Proceedings of the 5th International Conference EUROSTEEL, Graz, Austria, September.
  22. Zaharia, R., Pintea, D. and Dubina, D. (2009), "Fire analysis of structures in seismic areas", Proceedings of the International Conference on Application of Structural Fire Engineering, Prague, Czech Republic.
  23. Zhao, S. (2010), "GisFFE-an integrated software system for the dynamic simulation of fires following an earthquake based on GIS", Fire Safety J., 45(2), 83-97. https://doi.org/10.1016/j.firesaf.2009.11.001

피인용 문헌

  1. Practical Design Methods for Fire Resistance of Restrained Cellular Steel Beams vol.19, pp.6, 2017, https://doi.org/10.1007/s13296-019-00248-w
  2. Progressive collapse of steel-framed gravity buildings under parametric fires vol.36, pp.4, 2020, https://doi.org/10.12989/scs.2020.36.4.383
  3. Fire Performance of Continuous Steel-Concrete Composite Bridge Girders vol.25, pp.3, 2017, https://doi.org/10.1007/s12205-021-0985-x