한국주조공학회지 (Journal of Korea Foundry Society)

  • 제37권2호
  • /
  • Pages.31-37
  • /
  • 2017
  • /
  • 1598-706X(pISSN)
  • /
  • 2288-8381(eISSN)
한국주조공학회 (Korea Foundry Society)
권호 표지
DOI QR코드

DOI QR Code

오스테나이트계 내열 구상흑연주철의 고온 특성

Elevated Temperature Properties of Austenitic Heat-resistant Ductile Irons

  • 투고 : 2016.04.06
  • 심사 : 2017.04.18
  • 발행 : 2017.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A new form of austenitic heat-resistant ductile iron was developed and its microstructures and elevated temperature properties were compared to those of Ductile Ni-Resist D5S. According to JMatPro calculations, it was predicted that Mo-rich carbides would be crystallized before the eutectic reaction starts in the developed alloy. At the austenite cell boundaries of the developed alloy, both Mo-rich carbides and Cr-rich carbides were found. In addition, Ni-silicides were found adjacent to Cr-rich carbides in D5S specimen and were identified as $Ni_2Si$. The developed alloy also had greater yield strength and lower tensile strength levels with less elongation due to the dissolution of Mo atoms into the austenite matrix and the precipitation of Mo-rich carbides. From the results of elevated temperature tensile tests and stress-rupture tests, it was found that the developed alloy had elevated temperature properties superior to those of D5S. This was due to the pinning effect of the dissolved Mo atoms in the austenite matrix.

키워드

참고문헌

  1. J. D. Mullins, Ductile Iron Data for Design Engineers, Rio Tinto Iron & Titanium Inc., Canada (1990).
  2. M. Kawauchi, T. Hareyama, T. Hasegawa, K. Kanauchi, T. Yamada and T. Matsuki, J. JFS, "High Temperature Oxidation Characterisics of 12.5%Ni-7.5%Mn Austenitic Spheroidal Graphite Cast Iron", 82 (2010) 545-551.
  3. R. Oyake, T. Kon and E. Otsuki, J. JFS, "Characteristics of Austenitic Spheroidal Graphite Cast Iron Containing High Manganese, Nickel, and Silicon", 86 (2014) 852-857.
  4. M. Mohd Rashidi and M.H. Idris, Mater. Sci. Eng. A, "The effect of solidification on microstructure and mechanical properties of modified ductile Ni-resist iron with higher manganese content", 597 (2014) 395-407. https://doi.org/10.1016/j.msea.2013.12.070
  5. M. Mohd Rashidi and M.H. Idris, Mater. Sci. Eng. A, "Microstructure and mechanical properties of modified ductile Ni-resist with higher manganese content", 574 (2013) 226-234. https://doi.org/10.1016/j.msea.2013.02.038
  6. M. Kawabata and S. Endo, Hitachi Metals Technical Review, "Heat-Resistant Austenitic Ductile Iron-Microstructure and Shrinkage Properties", 32 (2016) 8-13.
  7. J. R. Davis, ASM Specialty Handbook Cast Irons, ASM Internation, OH (1996) 60.
  8. F. Alabbasia, S. M. A. Boutorabi and S. Kheirandish, Mater. Sci. Eng., A, "Effect of inoculation and casting modulus on the microstructure and mechanical properties of ductile Niresist cast iron", 651 (2016) 467-473. https://doi.org/10.1016/j.msea.2015.09.024
  9. American Foundrymen's Society, Ductile Iron Handbook, Inc. Des Plaines, Illinois (1993).
  10. N. Fatahallaa, A. AbuElEzzb and M. Semeidab, Mater. Sci. Eng. A, "C, Si and Ni as alloying elements to vary carbon equivalent of austenitic ductile cast iron: Microstructure and mechanical properties", 504 (2009) 81-89. https://doi.org/10.1016/j.msea.2008.10.019
  11. Choe KH, Lee SM, Kim MH, Yun SW and Lee KW, J. Korea Foundry Society, "Effects of Si and Mo on the Temperature- Dependent Properties of High Si High Mo Ductile Cast Irons", 29 (2009) 257-264.
  12. "Engineering Properties and Applications of the Ni-Resists and Ductile Ni-Resists", Paper 1231, Nickel Development Institute, International Nickel Co., (1975).
  13. "Elevated Temperature Properties of Cast Irons", SAE Standard J 125-88, SAE (1988).
  14. W. Fairhurst and K. Roehrig, Foundry Trade J., "High Silicon Nodular Irons", 146 (1979) 657-681.
  15. E. Hug, C. Keller, J. Favergeon and K. Dawi, Mater. Sci. Eng. A, "Application of the Monkman-Grant law to the creep fracture of nodular cast irons with various matrix compositions and structures", 518 (2009) 65-75. https://doi.org/10.1016/j.msea.2009.04.020