DOI QR코드

DOI QR Code

Parametric study on energy demands for steel special concentrically braced frames

  • Dogru, Selcuk (Department of Civil Engineering, Gebze Technical University) ;
  • Aksar, Bora (Department of Civil Engineering, Gebze Technical University) ;
  • Akbas, Bulent (Department of Civil Engineering, Gebze Technical University) ;
  • Shen, Jay (Department of Civil, Construction and Environmental Engineering, Iowa State University)
  • 투고 : 2016.09.07
  • 심사 : 2017.03.28
  • 발행 : 2017.06.10

초록

Structures are designed in such a way that they behave in a nonlinear manner when subject to strong ground motions. Energy concepts have been widely used to evaluate the structural performance for the last few decades. Energy based design can be expressed as the balance of energy input and the energy dissipation capacity of the structure. New research is needed for multi degree of freedom systems (MDOFs)-real structures- within the framework of the energy based design methodology. In this paper, energy parameters are evaluated for low-, medium- and high-rise steel special concentrically braced frames (SCBFs) in terms of total energy input and hysteretic energy. Nonlinear dynamic time history analyses are carried out to assess the variation of energy terms along the height of the frames. A seismic energy demand spectrum is developed and hysteretic energy distributions within the frames are presented.

키워드

과제정보

연구 과제 주관 기관 : The Scientific and Technological Research Council of Turkey (TUBITAK)

참고문헌

  1. ASCE 7-10 (2010), Minimum Design Loads for Buildings and Other Structures; American Society of Civil Engineers, Reston, VA, USA.
  2. AISC 341-10 (2010), Seismic Provisions for Steel Structural Buildings; American Institute of Steel Construction, Chicago, IL, USA.
  3. AISC 360-10 (2010), Specification for Structural Steel Buildings; American Institute of Steel Construction, Chicago, IL, USA.
  4. Akbas, B. and Shen, J. (2002), "Energy approach in performancebased earthquake-resistant design", Proceedings of the 12th European Conference on Earthquake Engineering, London, England, September.
  5. Akbas, B., Shen, J. and Hao, H. (2001), "Energy approach in performance-based seismic design of steel moment resisting frames for basic safety objective", The Structural Design of Tall Buildings, 10(3), 193-217. https://doi.org/10.1002/tal.172
  6. Akbas, B., Shen, J. and Temiz, H. (2006), "Identifying the hysteretic energy demand and distribution in regular steel frames", Steel Compos. Struct., Int. J., 6(6), 479-491. https://doi.org/10.12989/scs.2006.6.6.479
  7. Akiyama, H. (1985), Earthquake-Resistant Limit-State Design for Buildings, University of Tokyo Press.
  8. Benavent-Climent, A. and Zahran, R. (2010), "Seismic evaluation of existing rc frames with wide beams using an energy-based approach", Earthq. Struct., Int. J., 1(1), pp.93-108. https://doi.org/10.12989/eas.2010.1.1.093
  9. Bojorquez, E., Reyes-Salazar, A., Teran-Gilmore, A. and Ruiz, S.E. (2010), "Energy-based damage index for steel structures", Steel Compos. Struct., Int. J., 10(4), 331-348. https://doi.org/10.12989/scs.2010.10.4.331
  10. Bojorquez, E., Astorg, L., Reyes-Salazar, A., Teran-Gilmore, A., Velazquez, J., Bojorquez, J. and Rivera, L. (2015), "Prediction of hysteretic energy demands in steel frames using vectorvalued IMs", Steel Compos. Struct., Int. J., 19(3), 697-711. https://doi.org/10.12989/scs.2015.19.3.697
  11. Chopra, A.K. (2010), Dynamics of Structures: Theory and Applications to Earthquake Engineering, Prentice-Hall, Inc., NJ, USA.
  12. Choi, H. and Kim, J. (2009), "Evaluation of seismic energy demand and its application on design of buckling-restrained braced frames", Struct. Eng. Mech., Int. J., 31(1), pp.93-112. https://doi.org/10.12989/sem.2009.31.1.093
  13. Fajfar, P. and Vidic, T. (1994), "Consistent inelastic design spectra: hysteretic and input energy", J. Earthq. Eng. Struct. Dyn., 23(5), 523-537. https://doi.org/10.1002/eqe.4290230505
  14. Fajfar, P., Vidic, T. and Fischinger, M. (1991), "On the energy input into structures", Proceeedings of the Pacific Conference on Earthquake Engineering, Auckland, New Zealand, November, Volume 1, pp. 81-92.
  15. Guan, M., Hna, D., Du, H. and Wang, X. (2011), "A study on dissipation of cumulative hysteretic energy in reinforced concrete frame structures", Adv. Mater. Res., 163-167, 4301-4308.
  16. Habibi, A., Chan, R.W.K. and Albemani, F. (2013), "Energy-based design method for seismic retrofitting with passive energy dissipation systems", Eng. Struct., 46, 77-86. https://doi.org/10.1016/j.engstruct.2012.07.011
  17. Housner, G.W. (1956), "Limit design of structures to resist earthquakes", Proceedings of the 1st World Conference on Earthquake Engineering, Berkeley, CA, USA, June, 5-1-5-13.
  18. Manoukas, G.E., Athanatopoulou, A.M. and Avramidis, I.E. (2014), "Multimode pushover analysis based on energyequivalent sdof systems", Struct. Eng. Mech., Int. J., 51(4), 531-546. https://doi.org/10.12989/sem.2014.51.4.531
  19. Paolacci, F. (2015), "An energy-based design for seismic resistant structures with viscoelastic dampers", Earthq. Struct., Int. J., 4(2), 219-239.
  20. PEER Database (2014), Pacific Earthquake Engineering Research Center; 325 Davis Hall, University of California, Berkeley, CA, USA. URL: Peer.berkeley.edu/peer_ground_motion_database
  21. PERFORM-3D (2011), Nonlinear Analysis and Performance Assessment for 3D Structures Software; Version 5. URL: https://www.csiamerica.com/products/perform-3d
  22. Shen, J. and Akbas, B. (1999), "Seismic energy demand in steel moment frames", J. Earthq. Eng., 3(4), 519-559. https://doi.org/10.1080/13632469909350358
  23. Shen, J., Hao, H. and Akbas, B. (2000), Hysteresis Energy in Moment Frames, Engineering Science of Structures, A Special Volume Honoring Sidney A. Guralnick; Illinois Institute of Technology, pp. 112-138.
  24. Shen, J., Sabol, T.A., Akbas, B. and Sutchiewcharn, N. (2010), "Seismic demand on column splices in steel moment frames", Eng. J., AISC, 47(4th quarter), 223-240.
  25. Uang, C.M. and Bertero, V.V. (1988), "Use of energy as a design criterion in earthquake-resistant design", 1988 UBC/EERC Report n. 88/18.
  26. Ye, L., Chen, G. and Qu, Z. (2009), "Study on energy-based seismic design method and the application for steel braced frame structures", Proceedings of the 6th International Conference on Urban Earthquake Engineering, Tokyo, Japan, March.
  27. Zhang, H.D. and Wang, Y.F. (2012), "Energy-based numerical evaluation for seismic performance of a high-rise steel building", Steel Compos. Struct., Int. J., 13(6), 501-519. https://doi.org/10.12989/scs.2012.13.6.501

피인용 문헌

  1. Mathematical Expression of Design Hysteretic Energy Spectra Based on Chinese Soil Type vol.2019, pp.None, 2017, https://doi.org/10.1155/2019/3483516
  2. Experimental study on hysteretic behavior of steel moment frame equipped with elliptical brace vol.34, pp.6, 2020, https://doi.org/10.12989/scs.2020.34.6.891
  3. An energy-based approach to determine the yield force coefficient of RC frame structures vol.21, pp.1, 2017, https://doi.org/10.12989/eas.2021.21.1.037