Steel and Composite Structures

  • 제24권2호
  • /
  • Pages.227-237
  • /
  • 2017
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Optimization of long span portal frames using spatially distributed surrogates

  • Zhang, Zhifang (Guangzhou University-Tamkang University Joint Research Center for Engineering Structure Disaster Prevention and Control, Guangzhou University) ;
  • Pan, Jingwen (Guangzhou University-Tamkang University Joint Research Center for Engineering Structure Disaster Prevention and Control, Guangzhou University) ;
  • Fu, Jiyang (Guangzhou University-Tamkang University Joint Research Center for Engineering Structure Disaster Prevention and Control, Guangzhou University) ;
  • Singh, Hemant Kumar (School of Engineering and Information Technology, University of New South Wales) ;
  • Pi, Yong-Lin (Centre for Infrastructure Engineering Safety, University of New South Wales) ;
  • Wu, Jiurong (Guangzhou University-Tamkang University Joint Research Center for Engineering Structure Disaster Prevention and Control, Guangzhou University) ;
  • Rao, Rui (Guangzhou University-Tamkang University Joint Research Center for Engineering Structure Disaster Prevention and Control, Guangzhou University)
  • 투고 : 2016.11.21
  • 심사 : 2017.03.24
  • 발행 : 2017.06.10
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents optimization of a long-span portal steel frame under dynamic wind loads using a surrogate-assisted evolutionary algorithm. Long-span portal steel frames are often used in low-rise industrial and commercial buildings. The structure needs be able to resist the wind loads, and at the same time it should be as light as possible in order to be cost-effective. In this work, numerical model of a portal steel frame is constructed using structural analysis program (SAP2000), with the web-heights at five locations of I-sections of the columns and rafters as the decision variables. In order to evaluate the performance of a given design under dynamic wind loading, the equivalent static wind load (ESWL) is obtained from a database of wind pressures measured in wind tunnel tests. A modified formulation of the problem compared to the one available in the literature is also presented, considering additional design constraints for practicality. Evolutionary algorithms (EA) are often used to solve such non-linear, black-box problems, but when each design evaluation is computationally expensive (e.g., in this case a SAP2000 simulation), the time taken for optimization using EAs becomes untenable. To overcome this challenge, we employ a surrogate-assisted evolutionary algorithm (SAEA) to expedite the convergence towards the optimum design. The presented SAEA uses multiple spatially distributed surrogate models to approximate the simulations more accurately in lieu of commonly used single global surrogate models. Through rigorous numerical experiments, improvements in results and time savings obtained using SAEA over EA are demonstrated.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Funds of China, Natural Science Foundation of Guangdong Province

참고문헌

  1. Adeli, H. and Park, H.S. (1996), "Hybrid CPN-neural dynamics model for discrete optimization of steel structures", Comput.-Aided Civil Infra. Eng., 11(5), 355-366. https://doi.org/10.1111/j.1467-8667.1996.tb00449.x
  2. Artar, M. and Daloglu, A.T. (2015a), "Optimum design of composite steel frames with semi-rigid connections and column bases via genetic algorithm", Steel Compos. Struct., Int. J., 19(4), 1035-1053. https://doi.org/10.12989/scs.2015.19.4.1035
  3. Artar, M. and Daloglu, A.T. (2015b), "Optimum design of steel space frames with composite beams using genetic algorithm", Steel Compos. Struct., Int. J., 19(2), 503-519. https://doi.org/10.12989/scs.2015.19.2.503
  4. Aydin, Z. and Cakir, E. (2015), "Cost minimization of prestressed steel trusses considering shape and size variables", Steel Compos. Struct., Int. J., 19(1), 43-58. https://doi.org/10.12989/scs.2015.19.1.043
  5. Begg, D.W. and Liu, X. (1998), "Algorithms for optimal design of smart structural systems", Comput.-Aided Civil Infra. Eng., 13(6), 415-423. https://doi.org/10.1111/0885-9507.00119
  6. Bhattacharjee, K.S., Singh, H.K. and Ray, T. (2016), "Multiobjective optimization with multiple spatially distributed surrogates", J. Mech. Des., 138(9), 091401. https://doi.org/10.1115/1.4034035
  7. Camp, C., Pezeshk, S. and Cao, G. (1998), "Optimized design of two-dimensional structures using a genetic algorithm", J. Struct. Eng., 124(5), 551-559. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:5(551)
  8. Chan, C.M., Grierson, D.E. and Sherbourne, A.N. (1995), "Automatic optimal design of tall steel building frameworks", J. Struct. Eng., 121(5), 838-847. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:5(838)
  9. China Association for Engineering Construction Standardization (2012), Technical specification for steel structure of light-weight building with gabled frame (CECS102:2012).
  10. Computers and Structures, Inc. Berkeley, C. (1997), SAP2000; Integrated Finite Element Analysis and Design of Structures. URL: https://www.csiamerica.com/products/sap2000
  11. Deb, K. (2001), Multi-Objective Optimization using Evolutionary Algorithms, Volume 16, John Wiley & Sons.
  12. Deb, K., Pratap, A., Agarwal, S. and Meyarivan, T. (2002), "A fast and elitist multiobjective genetic algorithm: NSGA-II", IEEE Trans. Evol. Computat., 6(2), 182-197. https://doi.org/10.1109/4235.996017
  13. Hayalioglu, M. and Degertekin, S. (2005), "Minimum cost design of steel frames with semi-rigid connections and column bases via genetic optimization", Comput. Struct., 83(21), 1849-1863. https://doi.org/10.1016/j.compstruc.2005.02.009
  14. Holmes, J. (2002), "Effective static load distributions in wind engineering", J. Wind Eng. Ind. Aerodyn., 90(2), 91-109. https://doi.org/10.1016/S0167-6105(01)00164-7
  15. Isaacs, A. (2009), "Development of optimization methods to solve computationally expensive problems", Ph.D. Thesis; The University of New South Wales, Australian Defence Force Academy, Canberra, Australia.
  16. Isaacs, A., Ray, T. and Smith, W. (2009), "Multi-objective design optimisation using multiple adap-tive spatially distributed surrogates", Int. J. Product Develop., 9(1-3), 188-217. https://doi.org/10.1504/IJPD.2009.026179
  17. Jin, Y. (2005), "A comprehensive survey of fitness approximation in evolutionary computation", Soft Comput.-A Fusion Found. Methodol. Appl., 9(1), 3-12.
  18. Kameshki, E. and Saka, M. (2001), "Optimum design of nonlinear steel frames with semi-rigid connections using a genetic algorithm", Comput. Struct., 79(17), 1593-1604. https://doi.org/10.1016/S0045-7949(01)00035-9
  19. Kameshki, E. and Saka, M. (2003), "Genetic algorithm based optimum design of nonlinear planar steel frames with various semi-rigid connections", J. Constr. Steel Res., 59(1), 109-134. https://doi.org/10.1016/S0143-974X(02)00021-4
  20. Kaveh, A. and Shokohi, F. (2015), "Optimum design of laterallysupported castellated beams using CBO algorithm", Steel Compos. Struct., Int. J., 18(2), 305-324. https://doi.org/10.12989/scs.2015.18.2.305
  21. Kaveh, A., Bakhshpoori, T. and Barkhori, M. (2014), "Optimum design of multi-span composite box girder bridges using Cuckoo Search algorithm", Steel Compos. Struct., Int. J., 17(5), 705-719. https://doi.org/10.12989/scs.2014.17.5.705
  22. Kravanja, S. and Zula, T. (2010), "Cost optimization of industrial steel building structures", Adv. Eng. Software, 41(3), 442-450. https://doi.org/10.1016/j.advengsoft.2009.03.005
  23. Kravanja, S., Turkalj, G., Silih, S. and Zula, T. (2013), "Optimal design of single-story steel building structures based on parametric MINLP optimization", J. Constr. Steel Res., 81, 86-103. https://doi.org/10.1016/j.jcsr.2012.11.008
  24. Li, J.J. and Li, G.Q. (2004), "Reliability-based integrated design of steel portal frames with tapered members", Struct. Safety, 26(2), 221-239. https://doi.org/10.1016/j.strusafe.2003.02.001
  25. MathWorks (2014), Matlab 2014a. URL: www.mathworks.com
  26. Moss, P., Dhakal, R., Bong, M. and Buchanan, A. (2009), "Design of steel portal frame buildings for fire safety", J. Constr. Steel Res., 65(5), 1216-1224. https://doi.org/10.1016/j.jcsr.2008.09.003
  27. Myers, R.H. and Montgomery, D.C. (1995), Response Surface Methodology: Process and Product in Optimzation using Designed Experiments, John Wiley & Sons, Inc., NY, USA.
  28. Park, H.S. and Adeli, H. (1997), "Data parallel neural dynamics model for integrated design of large steel structures", Comput.-Aided Civil Infra. Eng., 12(5), 311-326. https://doi.org/10.1111/0885-9507.00066
  29. Paya, I., Yepes, V., Gonazlez-Vidosa, F. and Hospitaler, A. (2008), "Multiobjective optimization of concrete frames by simulated annealing", Comput.-Aided Civil Infra. Eng., 23(8), 596-610. https://doi.org/10.1111/j.1467-8667.2008.00561.x
  30. Phan, D.T., Lim, J.B., Sha, W., Siew, C.Y., Tanyimboh, T.T., Issa, H.K. and Mohammad, F.A. (2013a), "Design optimization of cold-formed steel portal frames taking into account the effect of building topology", Eng. Optimiz., 45(4), 415-433. https://doi.org/10.1080/0305215X.2012.678493
  31. Phan, D.T., Lim, J.B., Tanyimboh, T.T. and Sha, W. (2013b), "An efficient genetic algorithm for the design optimization of coldformed steel portal frame buildings", Steel Compos. Struct., Int. J., 15(5), 519-538. https://doi.org/10.12989/scs.2013.15.5.519
  32. Queipo, N.V., Goicochea, J.V. and Pintos, S. (2002), "Surrogate modeling-based optimization of SAGD processes", J. Petrol. Sci. Eng., 35(1), 83-93. https://doi.org/10.1016/S0920-4105(02)00167-5
  33. Sacks, J., Welch, W.J., Mitchell, T.J. and Wynn, H.P. (1989), "Design and analysis of computer experiments", Statist. Sci., 409-423.
  34. Saka, M. (2003), "Optimum design of pitched roof steel frames with haunched rafters by genetic algorithm", Comput. Struct., 81(18), 1967-1978. https://doi.org/10.1016/S0045-7949(03)00216-5
  35. Senouci, A.B. and Al-Ansari, M.S. (2009), "Cost optimization of composite beams using genetic algorithms", Adv. Eng. Software, 40(11), 1112-1118. https://doi.org/10.1016/j.advengsoft.2009.06.001
  36. Sgambi, L., Gkoumas, K. and Bontempi, F. (2012), "Genetic Algorithms for the Dependability Assurance in the Design of a Long-Span Suspension Bridge", Comput.-Aided Civil Infra. Eng., 27(9), 655-675. https://doi.org/10.1111/j.1467-8667.2012.00780.x
  37. Sgambi, L., Gkoumas, K. and Bontempi, F. (2014), "Genetic algorithm optimization of precast hollow core slabs", Comput. Concrete, Int. J., 13(3), 389-409. https://doi.org/10.12989/cac.2014.13.3.389
  38. Sun, W., Gu, M. and Zhou, X. (2015), "Universal Equivalent Static Wind Loads of Fluctuating Wind Loads on Large-Span Roofs Based on POD Compensation", Adv. Struct. Eng., 18(9), 1443-1459. https://doi.org/10.1260/1369-4332.18.9.1443
  39. Tokyo Polytechnic University (2011), "Aerodynamic database of low-rise buildings", URL: http://www.wind.arch.t-kougei.ac.jp/infocenter/windpres sure/lowrise/mainpage.html
  40. Topal, U. (2012), "Frequency optimization for laminated composite plates using extended layerwise approach", Steel Compos. Struct., Int. J., 12(6), 541-548. https://doi.org/10.12989/scs.2012.12.6.541
  41. Wang, G.G. and Shan, S. (2007), "Review of metamodeling techniques in support of engineering design optimization", J. Mech. Des., 129(4), 370-380. URL: http://link.aip.org/link/?JMD/129/370/1 https://doi.org/10.1115/1.2429697
  42. Wu, J., Donga, C., Xua, A. and Fua, J. (2012), "Structural optimization of long span portal-rigid frames under wind action", Proceedings of the 7th International Colloquium on Bluff Body Aerodynamics and Applications (BBAA7), Shanghai, China, September, pp. 1584-1593.