Advances in nano research

  • 제5권2호
  • /
  • Pages.99-111
  • /
  • 2017
  • /
  • 2287-237X(pISSN)
  • /
  • 2287-2388(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Strength and durability study on cement mortar containing nano materials

  • Ashok, M. (Department of Civil Engineering, National Institute of Technology) ;
  • Parande, A.K. (Food Engineering Department) ;
  • Jayabalan, P. (Department of Civil Engineering, National Institute of Technology)
  • 투고 : 2016.09.15
  • 심사 : 2017.02.07
  • 발행 : 2017.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

Nano particles have been gaining increasing attention and applied in many fields to fabricate new materials with novel functions due to their unique physical and chemical properties. In the present study two nano materials, namely nano silica (NS) and nano clay metakaolin (NMK) were partially replaced with ordinary Portland cement (OPC). The replacement level was varied from 0.5 to 2.0% in OPC and blended in cement mortar with a water cement ratio of 0.40. Mechanical property studies and durability experiments such as compressive strength, tensile strength, water absorption, depth of chloride penetration test. Nano silica was synthesized from rice husk ash and analyze the size using particle size analyzer. The results indicate that the compressive and tensile strength of the cement mortars containing nano materials were higher strength compared to the plain mortar with the same water cement ratio.

키워드

참고문헌

  1. Amutha, K., Ravibaskar, R. and Sivakumar, G. (2010), "Extraction, synthesis and characterization of Nanosilica from rice husk ash", Int. J. Nanotech. Appl., 4(1), 61-66.
  2. ASTM C1012-95a (1995), Standard test method for length change of Portland-cement Mortars exposed to a sulfate solution.
  3. ASTM C1202-97 (1997), Standard test method for electrical indication of concrete's ability to resist chloride ion penetration.
  4. ASTM C267-01 (2012), Standard test methods for chemical resistance of mortars, grouts and monolithic surfacing's and polymer concretes.
  5. ASTM C39 (2001), Standard test method for compressive strength of concrete specimens, PA, USA.
  6. ASTM C496 (2001), Standard test method for splitting tensile strength of concrete specimens, PA, USA.
  7. ASTM C642-06 (2006), Standard test method for density, absorption and voids in hardened concrete.
  8. Askarinejad, A., Pourkhorshidi, A.R. and Parhizkar, T. (2012), "Evaluation the pozzolanic reactivity of sonochemically fabricated nano natural pozzolan", Ultrasonics Sonochemistry, 19(1), 119-124. https://doi.org/10.1016/j.ultsonch.2011.05.005
  9. Attiogbe, E.K. and Rizkalla, S.H. (1988), "Response of concrete to sulfuric acid attack", ACI Mater. J., 85(6), 481-488.
  10. Bonakdar, A. and Mobasher, B. (1994), "Multi-parameter study of sulphate attack in blende cement materials", Cement Concrete Res., 24(4), 735-742. https://doi.org/10.1016/0008-8846(94)90199-6
  11. Borsoi, A., Collepardi, S., Coppola, L., Troli, R. and Collepardi, M. (2000), "Sulphate attack on blended portland cements", Proceedings of the 5th CANMET/ACI International Conference on Durability of Concrete, Barcelona, Spana Am, Coner. Int., SP-192 Vol. 1, pp. 417-432.
  12. Irassar, E.F. (2000), "Sulphate attack on cementitious materials containing limestone filler and natural pozzolana review", Cement Concrete Compos., 22(5), 361-368. https://doi.org/10.1016/S0958-9465(00)00019-6
  13. Irassar, E.F., Bonavetti, V.L. and Gonzalez, M. (2003), "Microstructural study of sulphate attack on ordinary and limestone Portland cements at ambient temperature", Cement Concrete Res., 33(1), 31-41. https://doi.org/10.1016/S0008-8846(02)00914-6
  14. IS 8112 (2000), Revised 43 grade ordinary portland cement-specification.
  15. Jo, B.W., Kim, C.H., Tae, G.H. and Park, J.B. (2008), "Characteristics of cement mortar with nano-$SiO_2$ particles", Constr. Build. Mater., 21(3), 153-157.
  16. Lin, K.L., Chang, W.C., Lin, D.F., Luo, H.L. and Tsai, M.C. (2008), "Effects of nano-$SiO_2$ and different ash particle sizes on sludge ash-cement mortar", J. Environ. Manag., 88(4), 708-714. https://doi.org/10.1016/j.jenvman.2007.03.036
  17. Lin, Q., Xu, Z., Lan, X., Ni, Y. and Lu, C. (2011), "The reactivity of nano silica with calcium hydroxide", J. Biomed. Mater. Res. Part-B Appl. Mater., 99(2), 239-246.
  18. Ltifi, M., Guefrech, A., Mounanga, P. and Khelidj, A. (2002), "Experimental study of the effect of addition of nano-silica on the behaviour of cement mortars", J. Funct. Polym., 15(3), 271-275.
  19. Morsy, M.S., Alsayed, S.H. and Aqel, M. (2010), "Effect of nano-clay on mechanical properties and Microstructure of ordinary Portland cement mortar", Int. J. Civil Environ. Eng., 10(1), 21-25.
  20. Morsy, M.S., Alsayed, S.H. and Aqel, M. (2011), "Hybrid effect of carbon nanotube and nano clay on physic-mechanical properties of cement mortar", Constr. Build. Mater., 25(1), 145-149. https://doi.org/10.1016/j.conbuildmat.2010.06.046
  21. Qing, Y., Zenan, Z., Deyu, K. and Rongshen, C. (2007), "Influence of nano-$SiO_2$ addition On properties of hardened cement paste as compared with silica fume", Construct. Build. Mater., 21(3), 539-545. https://doi.org/10.1016/j.conbuildmat.2005.09.001
  22. Sadrmomtazi, A. and Barzegar, A. (2010), Assessment of the effect of nano silica on physical and mechanical properties of SCC containing rice husk ash", Proceedings of the 2nd International Conference on Substainable Construction Materials and Technology, Ancona, Italy, June.
  23. Sadrmomtazi, A., Fasihi, A., Balalaei, F. and Haghi, A.K. (2009), "Investigation of mechanical and physical properties of mortars containing silica fume and Nano-$SiO_2$", Proceedings of the 2nd International Conference on Substainable Construction Materials and Technology, Ancona, Italy, July.
  24. Thuadaij, N. and Nuntiya, A. (2008), "Preparation of nanosilica powder from rice husk ash by precipitation method", Chiang Mai J. Sci., 35(1), 206-211.
  25. Tseng, D.H., Pan, S.Z. and Li, Z. (2002), "The study of the characteristics of sewage sludge ash and the development of reclamation techniques", Proceedings of the 12th Annual Meeting Sanitary Engineering, Taipei, Taiwan, pp. 221-232.
  26. Yang, C.C., Cho, S.W. and Huang, R. (2002), "The relationship between charge passed and the chloride-ion concentration in concrete using steady-state chloride migration test", Cem. Concr. Res, 32(2), 217-222. https://doi.org/10.1016/S0008-8846(01)00662-7
  27. Zhang, Y.L. and Li, C.D. (2002), Nano-Structured Technology and Nano-Structured Plastics, China Light Industry Press, Beijing, China, pp. 8-15, 386-389. [In Chinese]

피인용 문헌

  1. Influence of Nano Silica on Mechanical and Durability Characteristic of Mortar made by Partial Replacement of Natural Fine Aggregate with Recycled Fine Aggregate vol.13, pp.12, 2017, https://doi.org/10.1007/s12633-020-00688-8