Korean Chemical Engineering Research

  • 제55권3호
  • /
  • Pages.419-425
  • /
  • 2017
  • /
  • 0304-128X(pISSN)
  • /
  • 2233-9558(eISSN)
한국화학공학회 (The Korean Institute of Chemical Engineers)
권호 표지
DOI QR코드

DOI QR Code

벤치급 CO2 포집공정에서 흡수반응기의 내부구조에 따른 K-계열 고체흡수제의 성능평가

Performance Evaluation of K-based Solid Sorbents Depending on the Internal Structure of the Carbonator in the Bench-scale CO2 Capture Process

  • 김재영 (한국에너지기술연구원 온실가스연구실) ;
  • 임호 (한국에너지기술연구원 온실가스연구실) ;
  • 우제민 (한국에너지기술연구원 온실가스연구실) ;
  • 조성호 (한국에너지기술연구원 온실가스연구실) ;
  • 문종호 (한국에너지기술연구원 온실가스연구실) ;
  • 이승용 (한국에너지기술연구원 온실가스연구실) ;
  • 이효진 (한국에너지기술연구원 온실가스연구실) ;
  • 이창근 (한국에너지기술연구원 온실가스연구실) ;
  • 이종섭 (한국에너지기술연구원 온실가스연구실) ;
  • 민병무 (한국에너지기술연구원 온실가스연구실) ;
  • 박영철 (한국에너지기술연구원 온실가스연구실)
  • Kim, Jae-Young (Greenhouse Gas Research Laboratory, Korea Institute of Energy Research) ;
  • Lim, Ho (Greenhouse Gas Research Laboratory, Korea Institute of Energy Research) ;
  • Woo, Je Min (Greenhouse Gas Research Laboratory, Korea Institute of Energy Research) ;
  • Jo, Sung-Ho (Greenhouse Gas Research Laboratory, Korea Institute of Energy Research) ;
  • Moon, Jong-Ho (Greenhouse Gas Research Laboratory, Korea Institute of Energy Research) ;
  • Lee, Seung-Yong (Greenhouse Gas Research Laboratory, Korea Institute of Energy Research) ;
  • Lee, Hyojin (Greenhouse Gas Research Laboratory, Korea Institute of Energy Research) ;
  • Yi, Chang-Keun (Greenhouse Gas Research Laboratory, Korea Institute of Energy Research) ;
  • Lee, Jong-Seop (Greenhouse Gas Research Laboratory, Korea Institute of Energy Research) ;
  • Min, Byoung-Moo (Greenhouse Gas Research Laboratory, Korea Institute of Energy Research) ;
  • Park, Young Cheol (Greenhouse Gas Research Laboratory, Korea Institute of Energy Research)
  • 투고 : 2016.12.22
  • 심사 : 2017.03.21
  • 발행 : 2017.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서는 벤치급 건식 $CO_2$ 포집 성능평가 장치에서 흡수반응기 내부의 구조와 형태에 따른 K-계열 흡수제(KEP-CO2P2, 한국전력공사 전력연구원)의 성능특성을 확인하였다. 흡수반응기 혼합영역(mixing-zone)에 구조와 형태가 다르게 제작된 두 종류의 열교환기가 적용되었으며, 각각 CASE 1과 CASE 2로 나뉘어 동일한 조업조건으로 연속운전을 수행하였다. 연속운전동안 흡수반응 온도는 $75{\sim}80^{\circ}C$, 재생반응 온도는 $190{\sim}200^{\circ}C$, 그리고 반응기체($CO_2$) 농도는 12~14 vol%으로 설정하였다. 특히 흡수제의 흡수능 비교를 위해 흡수반응기 혼합영역의 차압을 400~500 mm$H_2O$로 유지하며 운전하였다. 또한 반응 후 채집한 시료는 반응성 비교를 위해 TGA를 이용하여 물성분석을 하였다. CASE 1 실험에서 $CO_2$ 제거효율과 동적흡수능은 각각 64.3%, 2.40 wt%으로 산출 되었고, CASE 2 실험에서 $CO_2$ 제거효율과 동적흡수능은 각각 81.0%, 4.66 wt%으로 산출되었다. 또한 반응 후 흡수제에 대한 TGA 측정 결과의 무게감량을 이용하여 흡수제의 동적흡수능을 계산한 결과, CASE 1과 CASE 2 실험에서 반응 후 흡수제의 동적흡수능은 각각 2.51 wt%와 4.89 wt%으로 산출되었다. 결론적으로 동일한 조업조건에서 흡수반응기 내부에 삽입되는 열교환기의 구조와 형태에 따라 흡수제의 성능 차이가 있는 것을 확인하였다.

In this study, the performance characteristics of the K-based sorbents (KEP-CO2P2, KEPCO RI, Korea) has been studied in relation with the heat exchanger structure and shape in a mixing zone of the carbonator in the bench-scale dry $CO_2$ capture process. Two types of heat exchangers (different structure and shape) were used in the carbonator as CASE 1 and CASE 2, in which the experiment has been continuously performed under the same operating conditions. During the continuous operation, working temperature of carbonator was 75 to $80^{\circ}C$, that of regenerator was 190 to $200^{\circ}C$, and $CO_2$ inlet concentration of the feed gas was 12 to 14 vol%. Especially, to compare the dynamic sorption capacity of sorbents, the differential pressure of the mixing zone in the carbonator was maintained around 400 to 500 mm $H_2O$. Also, solid samples from the carbonator and the regenerator were collected and weight variation of those samples was evaluated by TGA. The $CO_2$ removal efficiency and the dynamic sorption capacity were 64.3% and 2.40 wt%, respectively for CASE 1 while they were 81.0% and 4.66 wt%, respectively for CASE 2. Also, the dynamic sorption capacity of the sorbent in CASE 1 and CASE 2 was 2.51 wt% and 4.89 wt%, respectively, based on the weight loss of the TGA measurement results. Therefore, It was concluded that there could be a difference in the performance characteristics of the same sorbents according to the structure and type of heat exchanger inserted in the carbonator under the same operating conditions.

키워드

참고문헌

  1. Carbon Dioxide Reduction & Sequestration R&D Center "Global Warming, Cause and Measures," Korea Institute Energy Research(2004).
  2. Wee, J. H., Kim, J. L., Song, L. S., Song, B. Y. and Choi, K. S., "Reduction of Carbon-Dioxide Emission Applying Carbon Capture and Storage (CCS) Technology to Power Generation and Industry Sectors in Korea," Korean Society of Environmental Engineers, 961-972(2008).
  3. Jeon, E. C. and Sa, J. H., "Development of $CO_2$ Emission Fator by Fuel and $CO_2$ analysis at Sub-bituminous Fired Power Plant," J. Env. Hlth. Sci., 36(2), 128-135(2010).
  4. White, C. M., Strazisar, B. R., Granite, E. J., Hoffman, J. S. and Pennline, H. W., "Separation and Capture of $CO_2$ from Large Stationary Sources and Sepuestration in Geological Formation- Coalbeds and Deep Saline Aquifers," J. Air Waste Manage. Assoc., 37-41(2013).
  5. Lee, S. C., Choi, B. Y., Lee, T. J., Ryu, C. K., Ahn, Y. S. and Kim J. C., "$CO_2$ Absorption and Regeneration of Alkali Metal-based Solid Sorbents," Catal. Today, 111, 385-390(2006). https://doi.org/10.1016/j.cattod.2005.10.051
  6. Lee, S. C. and Kim, J. C., "Dry Potassium-Based Sorbents for "$CO_2$ Capture," Catal. Surv. Asia, 11, 171-185(2007). https://doi.org/10.1007/s10563-007-9035-z
  7. Lee, S. C., Chae, H. J., Lee, S. J., Choi, B. Y., Yi, C.-K., Lee, J. B., Ryu, C. K. and Kim, J. C., "Development of Regenerable MgO-Based Sorbent Promoted with $K_2CO_3$ for "$CO_2$ Capture at Low Temperatures," Environ. Sci. Technol., 42, 2736-2741(2008). https://doi.org/10.1021/es702693c
  8. Lee, S. C., Chae, H. J., Lee, S. J., Park, Y. H., C. K. Ryu, C. K. and Yi, C.-K., "Novel Regenerable Potassium-based Dry Sorbents for "$CO_2$ Capture at Low Temperatures," J. Mol. Catal. B, 56, 179-184(2009). https://doi.org/10.1016/j.molcatb.2008.07.007
  9. Lee, S. C., Chae, H. J., Choi, B. Y., Jung, S. Y., Ryu, C. Y., Park, J. J., Baek, J.-I. and Ryu, C. K., "The Effect of Relative Humidity on "$CO_2$ Capture Capacity of Potassium-based Sorbents," Korean J. Chem. Eng., 28(2), 480-486(2011). https://doi.org/10.1007/s11814-010-0398-x
  10. Lee, J. B., Ryu, C. K., Baek, J.-I., Lee, J. H., Eom, T. H. and Kim, S. H., "Sodium-Based Dry Regenerable Sorbent for Carbon Dioxide Capture from Power Plant Flue Gas," Ind. Eng. Chem. Res., 47(13), 4465-4472(2008). https://doi.org/10.1021/ie0709638
  11. Yi, C.-K., Hong, S. W., Jo, S.-H., Son, J. E. and Choi, J. H., "Absorption and Regeneration Characteristics of a Sorbent for Fluidized- Bed "$CO_2$ Removal Process," Korean Chem. Eng. Res., 43(2), 294- 298(2005).
  12. Yi, C.-K., Jo, S.-H., Seo, Y., Moon, K. H. and Yoo, J. S., ""$CO_2$ Capture Characteristics of Dry Sorbents in a Fast Fluidized Reactor," Syud. Surf. Sci. Catal., 159, 501-504(2006).
  13. Yi, C.-K., Jo, S.-H., Seo, Y., Lee, J. B. and Ryu, C. K., "Continuous Operation of the Potassium-based Dry Sorbent $CO_2$ Capture Process with Two Fluidized-bed Reactors," International Journal of Greenhouse Gas Control, 1(1), 31-36(2007). https://doi.org/10.1016/S1750-5836(07)00014-X
  14. Yi, C.-K., Jo, S.-H. and Seo, Y., "The Effect of Voidage on the $CO_2$ Sorption Capacity of K-Based Sorbent in a Dual Circulating Fluidized Bed Process," J. Chem. Eng. Jap., 41(7), 691-694(2008). https://doi.org/10.1252/jcej.07WE064
  15. Yi, C.-K., "Advances of Carbon Capture Technology," Korean Industrial Chemistry News, 12(1), 30-42(2009).
  16. Yi, C.-K., "Advances of Post-combustion Carbon Capture Technology by Dry Sorbent," Korean Chem. Eng. Res., 48(2), 140-146 (2010).
  17. Kim, K.-C., Kim, K. Y., Park, Y. C., Jo, S.-H., Ryu, H. J. and Yi, C. K., "Study of Hydrodynamics and Reaction Characteristics of K-based Solid Sorbents for $CO_2$ Capture in a Continuous System Composed of Two Bubbling Fluidized-bed Reactors," Korean Chem. Eng. Res., 48(4), 499-505(2010).
  18. Kim, K.-C., Park, Y. C., Jo, S.-H. and Yi, C. K., "The Effect of $CO_2$ or Steam Partial Pressure in the Regeneration of Solid Sorbents on the $CO_2$ Capture Efficiency in The Two-interconnected Bubbling Fluidized-beds System," Korean J. Chem. Eng., 28(10), 1986-1989(2011). https://doi.org/10.1007/s11814-011-0054-0
  19. Park, Y. C., Jo, S.-H., Park, K. W., Park, Y. S. and Yi, C.-K., "Effect of Bed Height on the Carbon Dioxide Capture by Carbonation/ Regeneration Cyclic Operations Using Dry Potassium-based Sorbents," Korean J. Chem. Eng., 26(3), 874-878(2009). https://doi.org/10.1007/s11814-009-0146-2
  20. Park, Y. C., Jo, S.-H., Ryu, C. K. and Yi, C.-K., "Long-Term Operation of Carbon Dioxide Capture System from a Real Coal- Fired Flue Gas Using Dry Regenerable Potassium-Based Sorbents," Energy Procedia, 1, 1235-1239(2009). https://doi.org/10.1016/j.egypro.2009.01.162
  21. Park, Y. C., Jo, S.-H., Ryu, C. K. and Yi, C.-K., "Demonstration of Pilot Scale Carbon Dioxide Capture System Using Dry Regenerable Sorbents to the Real Coal-Fired Power Plant in Korea," Energy Procedia, 4, 1508-1512(2011). https://doi.org/10.1016/j.egypro.2011.02.018
  22. Kim, K., Yang, S., Lee, J. B., Eom, T. H., Ryu, C. K., Jo, S.-H., Park, Y. C. and Yi, C.-K., "Analysis of $K_2CO_3$/$Al_2O_3$ Sorbent Tested with Coal-fired Power Plant Flue Gas: Effect of $SO_x$," Int. J. Greenhouse Gas Control, 9, 347-354(2012). https://doi.org/10.1016/j.ijggc.2012.04.004
  23. Kim, K., Yang, S., Lee, J. B., Eom, T. H., Ryu, C. K., Lee, H.-J., Bae, T.-S., Lee, Y.-B. and Lee, S.-J., "A Long-term Test of a New $CO_2$ Sorbent (KEP-CO2P2) in a 0.5 $MW_e $$CO_2$ Capture Test Bed," Korean J. Chem. Eng., 32(4), 677-684(2015). https://doi.org/10.1007/s11814-014-0297-7
  24. Park, Y. C., Jo, S.-H., Lee, D. H., Yi, C.-K., Ryu, C. K., Kim, K. S., You, C. H. and Park, K. S., "The Status of the Development Project for the 10 MWe-Scale Dry-Sorbent Carbon Dioxide Capture System to the real Coal-Fired Power Plant in Korea," Energy Procedia, 37, 122-6(2013). https://doi.org/10.1016/j.egypro.2013.05.092
  25. Park, Y. C., Jo, S.-H., Bae, D. H., Min, B. M., Ryu, C. K. and Yi, C.-K., "Development Status of the $CO_2$ Capture Process with dual Fluidized-beds for Post-combustion CCS Technology in Korea," Proceedings of the 13th International Conference on Clean Energy, 1, 2730-2732(2014).
  26. Park, Y. C., Jo, S.-H., Kyung, D.-H., Kim, J.-Y., Yi, C.-K., Ryu, C. K. and Shin, M. S., "Test Operation Results of the 10 MWe-scale Dry-sorbent $CO_2$ Capture Process Integrated with a Real Coal-fired Power Plant in Korea," Energy Procedia, 63, 2261-2265(2014). https://doi.org/10.1016/j.egypro.2014.11.245
  27. Park, Y. C., Jo, S.-H., Lee S.-Y., Moon, J.-H., C.-K., Ryu, Lee, J. B. and Yi, C.-K., "Performance Analysis of K-based KEP-CO2P1 Solid Sorbents in a Bench-scale Continuous Dry-sorbent $CO_2$ Capture Process," Korean J. Chem. Eng., 33(1), 73-79(2016). https://doi.org/10.1007/s11814-015-0091-1