Korean Chemical Engineering Research

The Korean Institute of Chemical Engineers (한국화학공학회)
권호 표지
DOI QR코드

DOI QR Code

Reaction Mechanism and Curing Characteristics of Chicken Feather-Based Adhesives and Adhesive Properties of Medium-Density Fiberboard Bonded with the Adhesive Resins

닭털로 제조한 접착제의 반응기작 및 경화 특성과 이를 이용하여 제조한 중밀도섬유판의 접착 특성

  • Yang, In (Department of Wood and Paper Science, College of Agriculture, Life & Environments Sciences, Chungbuk National University) ;
  • Park, Dae-Hak (Department of Wood and Paper Science, College of Agriculture, Life & Environments Sciences, Chungbuk National University) ;
  • Choi, Won-Sil (*National Instrumentation Center for Environmental Management, Seoul National University) ;
  • Oh, Sei Chang (Department of Forest Resources, College of Life and Environmental Science, Daegu University) ;
  • Ahn, Dong-uk (Department of Animal Science, Iowa State University) ;
  • Han, Gyu-Seong (Department of Wood and Paper Science, College of Agriculture, Life & Environments Sciences, Chungbuk National University)
  • 양인 (충북대학교 목재종이과학과) ;
  • 박대학 (충북대학교 목재종이과학과) ;
  • 최원실 (서울대학교 농생명과학공동기기원) ;
  • 오세창 (대구대학교 산림자원학과) ;
  • 안동욱 (아이오와주립대학교 동물과학과) ;
  • 한규성 (충북대학교 목재종이과학과)
  • Received : 2016.12.14
  • Accepted : 2017.01.19
  • Published : 2017.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, reaction mechanism and curing characteristics of adhesives formulated with NaOH- and $H_2SO_4$-hydrolyzed chicken feather (CF) and formaldehyde-based crosslinkers were investigated by FT-IR and DSC. In addition, adhesive properties and formaldehyde emission of medium-density fiberboards (MDF) applied with the adhesives were measured. CF-based adhesives having a solid content of 40% and over were very viscous at $25^{\circ}C$, but the viscosity reduced to $300{\sim}660m{\cdot}Pa{\cdot}s$ at $50^{\circ}C$. Consequently, the adhesives could be used as a sprayable resin. Through the FT-IR spectra of liquid and cured CF-based adhesives, addition reaction of methylol group and condensation reaction between the functional groups with the use of formaldehyde-based crosslinkers were identified. From the analysis of DSC, it was elucidated for CF-based adhesives to require a higher pressing temperature or longer pressing time comparing to commercial urea-formaldehyde (C-UF) resin. MDF bonded with CF-based adhesives, which was formulated with 5% NaOH-hydrolyzed CF (CF-AK-5%) and PF of formaldehyde to phenol mole ratio of 2.5 (PF-2.5), and pressed for 8 min had higher MOR and IB than those with other CF-based adhesives. MOR and IB of MDF bonded with the CF-based adhesives regardless of formulation type and pressing time were higher than those with C-UF resin. When the values compared with the minimum requirements of KS standard, IB exceeded the KS standard in all formulations and pressing time, but MOR of only MDF bonded with CF-AK-5% and PF-2.5 and pressed for 8 min satisfied the KS standard. What was worse, 24-TS of MDF bonded with all CF-based adhesives did not satisfied the KS standard. However, MOR and 24-TS can be improved by increasing the target density of MDF or the amount of wax emulsion, which is added to improve the water resistance of MDF. Importantly, the use of CF-based adhesives decreased greatly the formaldehyde emission. Based on the results, we reached the conclusion that CF-based adhesives formulated under proper conditions had a potential as a sprayable resin for the production of wood panels.

도계부산물인 닭털(CF)의 알칼리 및 산 가수분해물과 폼알데히드계 가교제를 혼합하여 조제한 접착제의 반응기작 및 경화특성을 조사하였다, 또한 이를 적용시켜 제조한 중밀도섬유판(MDF)의 물성 및 폼알데히드 방산량 측정 결과를 토대로 CF 접착제의 목질계 판상재 제조를 위한 분사형 접착제로서 적용 가능성을 확인하기 위하여 본 연구를 수행하였다. 고형분 함량이 40% 이상인 CF 접착제는 상온에서 점도가 높았으나, $50^{\circ}C$에서 측정한 점도는 $300{\sim}660m{\cdot}Pa{\cdot}s$로 측정되어 낮은 점도를 요구하는 분사형 접착제로 적용이 가능하였다. 적외선 분광기 분석을 통하여 폼알데히드계 가교제의 사용에 따른 methylol기의 부가 및 축합반응을 확인하였다. 시차주사 열량계 분석을 통하여 CF 접착제가 현재 목질계 판상재 제조에 사용되고 있는 요소수지(C-UF)와 비교하여 높은 열압온도 또는 긴 경화시간이 필요한 것으로 조사되었다. 5% NaOH 농도의 수용액에서 가수분해된 CF 가수분해물(이하 CF-AK-5%)과 formaldehyde/phenol 몰비가 2.5인 phenol-formaldehyde prepolymer (PF-2.5)로 조제한 접착제를 사용하고 8분간 열압하여 제조한 MDF에서 높은 휨강도(MOR)와 박리강도(IB)를 보였다. 또한 이 접착제로 제조한 MDF의 MOR과 IB는 대부분의 접착제 조제 및 열압 조건에서 C-UF로 제조한 MDF보다 높았다. 이 측정치를 KS 규격과 비교하였을 때, IB는 모든 조건에서 기준을 상회하였으나, MOR은 CF-AK-5%와 PF-2.5로 조제한 접착제를 사용하고 8분간 열압하여 제조한 MDF를 제외하고 그 기준을 만족하지 못하였으며, 24-TS도 모든 조건에서 기준을 만족하지 못하였다. 그러나 MDF 제조시 보드의 목표밀도를 높이거나 내수성 부여를 위하여 접착제에 첨가하는 wax emulsion의 양을 증가시킬 경우 MOR과 24-TS는 충분히 향상될 것으로 생각한다. 한편, MDF 제조에 있어 CF 접착제의 사용은 폼알데히드 방산량을 크게 감소시켰으며, 따라서 적절한 조건에서 조제된 CF 접착제는 목질계 판상재 제조를 위한 분사형 접착제로서 적용이 가능할 것으로 판단된다.

Keywords

References

  1. Bello, D., Herrick, C., Smith, T., Woskie, S., Streicher, R., Cullen, M., Liu, Y. and Redlich, C., "Skin Exposure to Isocyanates: Reasons for Concern," Environmental Health Perspectives, 115, 328-335(2007).
  2. International Agency for Research on Cancer, IARC classifies formaldehyde as carcinogenic to humans, http://www.iarc.fr/en/ mediacentre/pr/2004/pr153.html(2004).
  3. Ministry of Environment, Policy for managing the indoor air-quality of public facilities, ME No. 6911, Sejong, Republic of Korea(2003).
  4. Liu, Y. and Li, K., "Development and Characterization of Adhesives from Soy Protein for Bonding Wood," International J. Adhesion and Adhesives, 27, 59-67(2007). https://doi.org/10.1016/j.ijadhadh.2005.12.004
  5. Oh, Y., Seller Jr., T., Kim, M. G. and Strickland, R. C., "Evaluation of Phenol-formaldehyde OSB Resins Modified with Lignin Residues from Acid-hydrolyzed Waste Newsprint," For. Prod. J., 44(2), 25-29(1994).
  6. Yang, K. K., Wang, X. L. and Wang, Y. Z., "Progress Nanocomposite of Biodegradable Polymer," J. Industrial and Engineering Chemistry, 13(4), 485-500(2007).
  7. Olivares, M., Aceituno, H., Neiman, G., Rivera, E. and Seller Jr., T., "Lignin-modified Phenolic Adhesives for Bonding Radiata Pine Plywood," For. Prod. J., 45(1), 63-67(1995).
  8. Barbosa, A. P., Mano, E. B. and Andrade, C. T., "Tannin-based Resins Modified to Reduce Wood Adhesive Brittleness," For. Prod. J., 50(9), 89-92(2000).
  9. Rho, J. and Lee, J., "Preparation and Bonding Properties of Natural Garlic Adhesives for Wallpaper," J. of Adhesion and Interface, 12(4), 125-134(2011).
  10. Yang, I., Ahn, S. H., Choi, I. G., Kim, H. Y. and Oh, S. C., "Adhesives Formulated with Chemically Modified Okara and Phenol-resorcinol- formaldehyde for Bonding Fancy Veneer onto High-density Fiberboard," J. of Industrial and Engineering Chemistry, 15(3), 398-402(2009). https://doi.org/10.1016/j.jiec.2008.12.005
  11. Yang, I., Han, G. S., Ahn, S. H., Choi, I. G., Kim, Y. H. and Oh, S. C., "Adhesive Properties of Medium-density Fiberboards Fabricated with Rapeseed Flour-based Adhesives," J. of Adhesion, 90(4), 279-295(2014). https://doi.org/10.1080/00218464.2013.793161
  12. Yang, I., Han, G. S., Choi, I. G., Kim, Y. H., Ahn, S. H. and Oh, S. C., "Development of Adhesive Resins Formulated with Rapeseed Flour Hydrolyzates for Medium-density Fiberboard (MDF)," J. of Korean Wood Science & Technology, 40(3), 177-185(2012). https://doi.org/10.5658/WOOD.2012.40.3.177
  13. Yang, I., Lee, K. H. and Oh, S. C., "Manufacture and Performance Evaluation of Medium-density Fiberboard Made with Coffee Bean Residue-wood Fiber," J. of Korean Wood Science & Technology, 41(4), 293-301(2013). https://doi.org/10.5658/WOOD.2013.41.4.293
  14. Pizzi, A., "Recent Development in Eco-efficient Bio-based Adhesives for Wood Bonding: Opportunities and Issues," J. of Adhesion Science and Technology, 20, 829-846(2006). https://doi.org/10.1163/156856106777638635
  15. Yoon, J. H., Won, J. W., Rho, H. J., Ahn, J. R. Yu, S. J., Lee, Y. B., Moon, C. K. and Kim, S. B., "Optimization of Adhesive Strength to Plywood of Gelatin Processed from Dorsal Skin of Yellowfin Tuna (Thunnus albacares)," Korean J. Chem. Eng., 25(1), 134- 138(2008). https://doi.org/10.1007/s11814-008-0024-3
  16. Yang, I., Kuo, M. L., Myers, D. and Pu, A., "Comparison of Proteinbased Adhesive Resins for Wood Composites," J. of Wood Science, 52, 503-508(2006). https://doi.org/10.1007/s10086-006-0804-5
  17. Lambuth, A. L., Protein adhesives for wood, in Wood Adhesives: Chemistry and Technology, Vol. II. Marcel Dekker, Inc., New York, NY(1989).
  18. Wang, W., Zhao, Z., Gao, Z. and Gou, M., "Whey Protein-based Water-resistant and Environmentally Safe Adhesives for Plywood," Bioresources, 6, 3339-3351(2011).
  19. Wang, C. and Wu, J., "Preparation and Characterization of Adhesive from Spent Hen Proteins," International J. of Adhesion and Adhesives, 36, 8-14(2012). https://doi.org/10.1016/j.ijadhadh.2012.04.003
  20. Park, S. K., Bae, D. H. and Hettiarachchy, N. S., "Protein Concentrate and Adhesives from Meat and Bone Meal," J. of American Oil Chemists Society, 77, 1223-1227(2000). https://doi.org/10.1007/s11746-000-0191-5
  21. Jiang, Z., Qin, D. Hse, C. Kuo, M. L., Luo, Z., Wang, G. and Yu, Y., "Preliminary Study on Chicken Feather Protein-based Wood Adhesives," J. of Wood Chemistry and Technology, 28, 240-246 (2008). https://doi.org/10.1080/02773810802347073
  22. Pearson, C. L., "Animal Glues and Adhesives," Marcel Dekker, Inc., New York, NY, 26-37(2003).
  23. El-Thaher, N., Mekonnen, T., Mussone, P., Bressler, D. and Choi, P., "Effect of Electrolytes, Water and Temperature on Cross-linking of Glutaraldehyde and Hydrolyzed Specified Risk Materials," Industrial and Engineering Chemistry Research, 52, 4987-4993 (2013). https://doi.org/10.1021/ie303416h
  24. Wang, Y., Mo, X., Sun, X. and Wang, D., "Soy Protein Adhesion Enhanced by Glutaraldehyde Crosslink," J. of Applied Polymer Science, 104, 130-136(2007). https://doi.org/10.1002/app.24675
  25. El-Thaher, N., Mekonnen, T., Mussone, P., Bressler, D. and Choi, P., "Non-isothermal DSC Study of Epoxy Resins Cured with Hydrolyzed Specified Risk Materials," Industrial and Engineering Chemistry Research, 52, 8189-8199(2013). https://doi.org/10.1021/ie400803d
  26. Jang, Y., Huang, J. and Li, K., "A New Formaldehyde-free Wood Adhesives from Renewable Materials," International J. of Adhesion and Adhesives, 31, 754-759(2011). https://doi.org/10.1016/j.ijadhadh.2011.07.003
  27. Woo, B. J. and Kim, H. J., Imbalance of supply and demand for chicken meat and its spread effect, Korea Rural Economic Institute, Seoul(2015).
  28. Lee, J. G. and Lee, S. M., "Evaluation of Soybean Meal or Feather Meal as a Partial Substitute for Fish Meal in Formulated Diets for Fat Cod," J. of Aquaculture, 11(4), 421-428(1998).
  29. Meeker, D. L. and Hamilton, C. L., "An Overview of the Rendering Industry," National Renderers Association, Alexandria, VA(2006).
  30. http://www.dpi.nsw.gov.au/__data/assets/pdf_file/0016/101185/ feed-controls-stopping-bse-mad-cow-disease.pdf.
  31. http://ec.europa.eu/food/food/biosafety/tse_bse/docs/roadmap_2_en.pdf.
  32. https://www.daera-ni.gov.uk/articles/bse-feed-controls.
  33. https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfCFR/CFRSearch.cfm?CFRPart=589&showFR=1.
  34. Park, D. H., Yang, I., Choi, W. S., Oh, S. C., Ahn, D. U. and Han, G. S., "Evaluating the Water Resistance of Wood Adhesives Formulated with Chicken Feather Produced from the Poultry Industry," J. of Korean Wood Science & Technology, 45(1), 126-138(2017). https://doi.org/10.5658/WOOD.2017.45.1.126
  35. Kwon, K. T., Jung, G. W. and Chun, B. S., "Amino Acid Recovery from Brown Seaweed (Undaria pinnatifida) Using Subcritical Water Hydrolysis," Korean Chem. Eng. Res., 48(6), 747-751(2010).
  36. American Society for Testing and Materials, Standard test methods for determination of percent nonvolatile content of liquid phenolic resins used for wood laminating. ASTM D 4426, ASTM, Philadelphia, PA(1993).
  37. Korean Agency for Technology and Standards, Fiberboards, KSC, KS F 3200, Eumseong, Chungbuk, Republic of Korea(2011).
  38. Korea Forest Research Institute, Determination of formaldehyde emission for wood panels, KFRI, KFRI 2014-03, Seoul, Republic of Korea(2014).
  39. Ahn, S. H., "Effect of Heating Temperature and Time of Coffee Waste on the Adsorptivity of Formaldehyde," J. of Korean Wood Science & Technology, 43(3), 390-399(2015). https://doi.org/10.5658/WOOD.2015.43.3.390
  40. Mun, S. S., Kim, J. G., Lee, S. U. and Hong, I. S., Introduction to Spectroscopy, 4th Ed., Sciplus, Seoul, 13-81(2010).

Cited by

  1. Adhesive and curing properties of chicken feather/blood-based adhesives for the fabrication of medium-density fiberboards vol.94, pp.14, 2018, https://doi.org/10.1080/00218464.2017.1371597