References
- R. Ramesh, M. Mannan, A. Poo, "Error compensation in machine tools-a review. Part I: geometric, cutting-force induced and fixture-dependent errors", Int J. Mach. Tool Manu., Vol.40, No,9, pp.1235-1256, 2000. https://doi.org/10.1016/S0890-6955(00)00009-2
- Schwenke H, Knapp W, Haitjema H, "Geometric error measurement and compensation of machines -an update", Annals of the CIRP, Vol.57, No.2, pp.660-675, 2008. https://doi.org/10.1016/j.cirp.2008.09.008
- Y. Schmitz, J. Ziegert, J. Canning, R. Zapata, "Case study: A comparision of error sources in high-speed milling", Precision Engineering, Vol.32, pp.126-133, 2009.
- S. Ibaraki, M. Sawada, A. Matsubara, T. Matsushita, "Machining tests to identify kinematic errors on five-axis machine tools", Precision Engineering, Vol.34, pp.387-398, 2010. https://doi.org/10.1016/j.precisioneng.2009.09.007
- S. Aguado, D. Samper, J. Santolaria, "Towards an effective identification strategy in volumetric error compensation of machine tools", Meas Sci Technol., Vol.23, No.6, pp.1-12, 2012.
- R. Ramesh, M. Mannan, A. Poo, "Error compensation in machine tools-a review. Part II: thermal errors", Int J. Mach. Tool Manu., Vol.40, No,9, pp.1257-1284, 2000. https://doi.org/10.1016/S0890-6955(00)00010-9
- M. Attia, L. Kops, "Computer simulation of nonlinear thermoelastic behaviour of a joint in machine tool structure and its effect on thermal deformation", ASME Trans. J. of Eng. for Ind. Vol.101, pp.355-361, 1979. https://doi.org/10.1115/1.3439518
- M. Attia, L. Kops, "A new method for determining the thermal contact resistance at machine tool joints", Annals of the CIRP, Vol.30, No.1, pp.259-264, 1981. https://doi.org/10.1016/S0007-8506(07)60938-X
- R. Ramesh, M. Mannan, A. Poo, "Error compensation in machine tools - a review Part II: thermal errors", Int. J. Mach. Tools Manuf., Vol. 40, pp.1257-1284, 2000. https://doi.org/10.1016/S0890-6955(00)00010-9
- W. Yun, D. Cho, "An improved cutting force model considering the size effect in end milling", ASME Int. Mech. Eng. Congress and Exposition, Orlando, pp.223-229, 2000.
- G. Kim, B. Kim, C. Chu, "Estimation of cutter deflection and formerror in ball-end milling process", Int. J. Mach. Tools Manuf., Vol. 43, pp.917-924, 2003. https://doi.org/10.1016/S0890-6955(03)00056-7
- Y. Cheng, J. Chin, "Machining contour errors as ensembles of cutting, feeding and machine structure effects", Int. J. Mach. Tools Manuf., Vol.43, pp.1001-1014, 2003. https://doi.org/10.1016/S0890-6955(03)00093-2
- K. H. Kim, A Study on the Accuracy Analysis of 3-Axis and 5-Axis Machining Center and Error Compensation, Master Thesis, Daegu Univ. 2015.
- KS B ISO Standards. "Test conditions for machining centres-Part 2:Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis(vertical Z-axis)" KS B ISO 10791-2, 2007
- C. Eun, Y. C. Lee, "Compensation of the non-linearity of the audio power amplifier converged with digital signal processing technique", J.of the Korea Convergence Society, Vol.7, No.3, pp.77-85
- S. W. Lee, Development of thermal error measurement and compensation system for spindle and feed axis in CNC machine tools, Ph.D Thesis, Deoul National Univ. 2000