Smart Structures and Systems

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

A measuring system for determination of a cantilever beam support moment

  • Loktionov, Askold P. (Department of Mechanics and Engineering, Southwest State University)
  • Received : 2016.08.05
  • Accepted : 2017.02.20
  • Published : 2017.04.25
⟨ Previous Next ⟩

Abstract

This investigation is aimed to develop a model of experimental-computation determination of a support moment of a cantilever beam loaded with concentrated force at its end including the optimal choice of coordinates of deflection data points and parameters of transformation of deflection data in case of insufficient accuracy of the assignment of initial parameters (support settlement, angle of rotation of the bearing section) and cantilever beam length. The influence of distribution and characteristics of sensors on the cantilever beam on the accuracy of determining the support moment which improves in the course of transition from the uniform distribution of sensors to optimal non-uniform distribution is shown. On the basis of the theory of inverse problems the method of transformation reduction at numerical differentiation of deflection functions has been studied. For engineering evaluation formulae of uncertainty estimate to determine a support moment of a cantilever beam at predetermined uncertainty of measurements using sensors have been obtained.

Keywords

References

  1. Chekushkin, V.V., Mikheev, K.V. and Panteleev, I.V. (2015), "Improving polynomial methods of reconstruction of functional dependences in information-measuring systems", Meas. Tech., 58(4), 385-392. https://doi.org/10.1007/s11018-015-0722-2
  2. Cheney, E.W., Kincaid, D. R. (2013), Numerical Mathematics and Computing, Thomson Brooks/Cole, Belmont, California, USA.
  3. Dmitrienko, A.G., Blinov, A.V. and Novikov, V.N. (2011), "Distributed smart system for monitoring the state of complex technical objects", Meas. Tech., 54(3), 235-239. https://doi.org/10.1007/s11018-011-9713-0
  4. Dung, C.V. and Sasaki E. (2016), "Numerical simulation of output response of PVDF sensor attached on a cantilever beam subjected to impact loading", Sensors, 16(5), 601. https://doi.org/10.3390/s16050601
  5. Gere, J.M. and Timoshenko, S.P. (1997), Mechanics of Materials, PWS Pub. Company, Boston, Massachusetts, USA.
  6. Haque, M.E., Zain, M.F.M., Hannan, M.A. and Rahman, M.H. (2015), "Building structural health monitoring using dense and sparse topology wireless sensor network", Smart Struct. Syst., 16(4), 607-621. https://doi.org/10.12989/sss.2015.16.4.607
  7. Huang, H.B., Yi, T.H. and Li. H.N. (2016), "Canonical correlation analysis based fault diagnosis method for structural monitoring sensor networks", Smart Struct. Syst., 17(6), 1031-1053. https://doi.org/10.12989/sss.2016.17.6.1031
  8. Kuchumov, E.V. (2011), "Oscillation dynamics of metal wire sensor elements", Meas. Tech., 54(3), 226-231. https://doi.org/10.1007/s11018-011-9711-2
  9. Liew, S.S. and Choo, E.L. (2004), Bending Moment Interpretation Of Structural Element With Measured Deflection Profile; Gue & Partners Sdn Bhd, Kuala Lumpur, Malaysia.
  10. Loktionov, A.P. (2007), "A principle of constructing the system for measuring the FV takeoff weight and center-of-mass position on the basis of measurement reduction", Russian Aeronautics, 50(2), 178-185. https://doi.org/10.3103/S1068799807020110
  11. Loktionov, A.P. (2013), "Regularization of the lattice time function of the signal in the communication channel", Telecommun. Radio Eng., 72(2), 161-171. https://doi.org/10.1615/TelecomRadEng.v72.i2.70
  12. Lu, C., Liu, W., Zhang, Y. and Zhao, H. (2012), "Experimental estimating deflection of a simple beam bridge model using grating eddy current sensors", Sensors, 12(8), 9987-10000. https://doi.org/10.3390/s120809987
  13. Mordvinov, A.V. (2010), "Reduction of measurements of total solar flux to a unified scale and uncertainty in estimating its long-term trends", Geomagnet. Aeronomy, 50(8), 933-936. https://doi.org/10.1134/S0016793210080025
  14. Ozbey, B., Erturk, V.B., Demir, H.V., Altintas, A. and Kurc, O.A. (2016), "A wireless passive sensing system for displacement/strain measurement in reinforced concrete members", Sensors, 16(4), 496. https://doi.org/10.3390/s16040496
  15. Yi, T.H., Zhou, G.D., Li, H.N. and Zhang, X.D. (2015a), "Health monitoring sensor placement optimization for Canton Tower using virus monkey algorithm", Smart Struct. Syst., 15(5), 1379-1392.
  16. Yi, T.H., Zhou, G.D., Li, H.N. and Zhang, X.D. (2015b), "Optimal sensor placement for health monitoring of high-rise structure based on collaborative-climb monkey algorithm", Struct. Eng. Mech., 54(2), 305-317. https://doi.org/10.12989/sem.2015.54.2.305
  17. Zelenkova, M.V. and Skripka, V.L. (2015), "Prospects for Improving Calibration Techniques using a Measurement Reduction Apparatus", Meas. Tech., 58(5), 491-495. https://doi.org/10.1007/s11018-015-0742-y
  18. Zhou, G.D., Yi, T.H., Zhang, H. and Li, H.N. (2015), "Optimal sensor placement under uncertainties using a nondirective movement glowworm swarm optimization algorithm", Smart Struct. Syst., 16(2), 243-262. https://doi.org/10.12989/sss.2015.16.2.243

Cited by

  1. Study of the causes of uncertainty in thermoelasticity measurements of mechanical components vol.118, 2018, https://doi.org/10.1016/j.measurement.2018.01.037
  2. Numerical Differentiation in the Measurement Model vol.62, pp.8, 2019, https://doi.org/10.1007/s11018-019-01677-z
  3. Modifications on F2MC tubes as passive tunable vibration absorbers vol.28, pp.2, 2017, https://doi.org/10.12989/sss.2021.28.2.153