DOI QR코드

DOI QR Code

Optimum design and vibration control of a space structure with the hybrid semi-active control devices

  • Zhan, Meng (Department of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Wang, Sheliang (Department of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Yang, Tao (Department of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Liu, Yang (Department of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Yu, Binshan (Department of Civil Engineering, Xi'an University of Architecture and Technology)
  • Received : 2016.06.06
  • Accepted : 2016.12.08
  • Published : 2017.04.25

Abstract

Based on the super elastic properties of the shape memory alloy (SMA) and the inverse piezoelectric effect of piezoelectric (PZT) ceramics, a kind of hybrid semi-active control device was designed and made, its mechanical properties test was done under different frequency and different voltage. The local search ability of genetic algorithm is poor, which would fall into the defect of prematurity easily. A kind of adaptive immune memory cloning algorithm(AIMCA) was proposed based on the simulation of clone selection and immune memory process. It can adjust the mutation probability and clone scale adaptively through the way of introducing memory cell and antibody incentive degrees. And performance indicator based on the modal controllable degree was taken as antigen-antibody affinity function, the optimization analysis of damper layout in a space truss structure was done. The structural seismic response was analyzed by applying the neural network prediction model and T-S fuzzy logic. Results show that SMA and PZT friction composite damper has a good energy dissipation capacity and stable performance, the bigger voltage, the better energy dissipation ability. Compared with genetic algorithm, the adaptive immune memory clone algorithm overcomes the problem of prematurity effectively. Besides, it has stronger global searching ability, better population diversity and faster convergence speed, makes the damper has a better arrangement position in structural dampers optimization leading to the better damping effect.

Keywords

Acknowledgement

Supported by : National Natural Science Foundation of China, Shaanxi province natural science foundation, Key Laboratory of Green Building in West China, Ministry of Communications

References

  1. Chen, C.Q. and Chen, G.D. (2004), "Shake table tests o f a quarter-scale three-story building model with piezoelectric friction dampers", Struct. Control Hlth. Monit., 11(4), 239-257. https://doi.org/10.1002/stc.41
  2. Cho, S.W., Kim, B.W. and Jung, H.J. (2005), "Implementation of modal control for seismically excited structures using magnetorheological dampers", J. Eng. Mech., 131(2), 177-184. https://doi.org/10.1061/(ASCE)0733-9399(2005)131:2(177)
  3. Choi, S.B., Park, Y.K. and Fukuda, T. (1998), "Proof-of-concept investigation on active vibration control of hybrid smart structures", Mechatronics, 8(6), 673-689. https://doi.org/10.1016/S0957-4158(98)00029-4
  4. Contreras, M.T., Pasala, D.T.R. and Nagarajaiah, S. (2014), "Adaptive length SMA pendulum Smart tuned mass damper performance in the presence of real time primary system stiffness change", Smart Struct. Syst., 13(2), 219-233. https://doi.org/10.12989/sss.2014.13.2.219
  5. Dai, N.X. (2012), "Experimental and theoretial research on the smart isolation system using PZT and SMA complex friction damper", Ph.D. Dissertation , Hunan University, Changsha.
  6. El-Attar, A., Saleh, A., El-Habbal, I., Zaghw, A.H. and Osman, A. (2008), "The use of SMA wire dampers to enhance the seismic performance of two historical Islamic minarets", Smart Struct. Syst., 4(2), 221-232. https://doi.org/10.12989/sss.2008.4.2.221
  7. Etedali, S., Sohrabi, M.R. and Tavakoli, S. (2013), "Optimal PD/PID control of smart base isolated buildings equipped with piezoelectric friction dampers", Earthq. Eng. Eng. Vib., 12(1), 39-54. https://doi.org/10.1007/s11803-013-0150-8
  8. Liu, R.C., Jiao, L.C. and Du, H.F. (2005), "Clonal Strategy Algorithm Based on the Immune Memory", J. Comput. Sci. Technol., 20(5), 728-734. https://doi.org/10.1007/s11390-005-0728-3
  9. Liu, Z.S., Wang, D.J., Hu, H.C. and Yu, M. (1994), "Measures of modal controllability and observability in vibration control of flexible Structures", J. Guidance Control Dyn., 17(6), 1377-1380. https://doi.org/10.2514/3.21363
  10. Ok, S.Y., Song, J. and Park, K.S. (2008), "Optimal design of hysteretic dampers connecting adjacent structures using multiobjective genetic algorithm and stochastic linearization method", Eng. Struct., 30(5), 1240-1249. https://doi.org/10.1016/j.engstruct.2007.07.019
  11. Ozbulut, O.E. and Hurlebaus, S. (2010), "Fuzzy control of piezoelectric friction dampers for seismic protection of smart base isolated buildings", Bull. Earthq. Eng., 8(6), 1435-1455. https://doi.org/10.1007/s10518-010-9187-5
  12. Sun, D.C., Song, Z. and Wang, D.J. (1999), "Hybrid control method of beams using two kinds of smart material", Chinese J. Appl. Mech., 16(4), 83-88.
  13. Xu, B., He, J. and Dyke, S.J. (2015), "Model-free nonlinear restoring force identification for SMA dampers with double Chebyshev polynomials: approach and validation", Nonlinear Dynam., 82(3), 1507-1522. https://doi.org/10.1007/s11071-015-2257-0
  14. Yan, G. and Zhou, L.L. (2006), "Integrated fuzzy logic and genetic algorithms for multi-objective control of structures using MR dampers", J. Sound Vib., 296(1-2), 368-382. https://doi.org/10.1016/j.jsv.2006.03.011
  15. Yuvaraja, M. and Senthilkumar, M. (2013), "Comparative study on vibration characteristics of a flexible GFRP composite beam using SMA and PZT actuators", Procedia Eng., 64, 571-581. https://doi.org/10.1016/j.proeng.2013.09.132
  16. Zhan, M., Wang, S.L., Zhu, X.Y. and Zhu, J.Q. (2014), "Semiactive optimization control of space truss model with piezoelectric friction damper", J. Build. Struct., 35(8), 50-56.
  17. Zhao, D.H. and Li, H.N. (2011), "Seismic reduction tests of a model structure with piezoelectric friction damper", J. Vib. Shock, 30(6), 272-276.
  18. Zhou, X. and You, Z. (2015), "Theoretical analysis of superelastic SMA helical structures subjected to axial and torsional loads", Smart Struct. Syst., 15(5), 1271-1291. https://doi.org/10.12989/sss.2015.15.5.1271

Cited by

  1. Optimum distribution of steel slit-friction hybrid dampers based on life cycle cost vol.27, pp.5, 2017, https://doi.org/10.12989/scs.2018.27.5.633
  2. Effect of flexural and shear stresses simultaneously for optimized design of butterfly-shaped dampers: Computational study vol.23, pp.4, 2017, https://doi.org/10.12989/sss.2019.23.4.329
  3. Numerical and experimental research on actuator forces in toggled active vibration control system (Part I: Numerical) vol.25, pp.2, 2020, https://doi.org/10.12989/sss.2020.25.2.229
  4. Optimized Neural Network Prediction Model of Shape Memory Alloy and Its Application for Structural Vibration Control vol.14, pp.21, 2021, https://doi.org/10.3390/ma14216593