DOI QR코드

DOI QR Code

Numerical research for Gate Type Waste Incinerators In Environment energy facilities

환경에너지시설내 화격자식 소각로 수치해석 연구

  • Kim, Jong-Yoon (Department of Fire Safety Management, Seojeong College) ;
  • Jeon, Yong-Han (Department of Fire Protection and Safety, Sangji-Youngseo College)
  • 김종윤 (서정대학교 소방안전관리과) ;
  • 전용한 (상지영서대학교 소방안전과)
  • Received : 2017.10.20
  • Accepted : 2017.12.11
  • Published : 2017.12.31

Abstract

This study is analyzed combustion phenomena based on the environmental energy facility incinerator. It is assumed that combustible components of waste are composed of carbon and hydrogen, and the combustion process of fuel is by setting as multi-component / multistage reaction. As the combustion chamber is burned, the high temperature environment is achieved, also the heat transfer accompanied by the turbulent flow and the generation of NOx, a pollutant, are interpreted to predict the thermal and fluid characteristics and pollution emissions of the grate incinerator. As the result of internal flow analysis, the slow flow around the ash chute and the mixing effect due to the complicated turbulence around the combustion chamber were predicted to show excellent performance. It is shown to the internal average temperature was about $1024^{\circ}C$, around the about $1000^{\circ}C$ homogeneous temperature distribution. Due to the sudden temperature decrease in the boiler, the flue gas temperature at the outlet was estimated to be about $220^{\circ}C$.

Keywords

References

  1. Lee. Y.S.(2010), "A Study on the Setting of CFD Boundary Condition for Hot Flow Grate Type Incinerator." KOSCO Syoposium.
  2. Yoo, C.K.(2002), "Discussion on the Practical Use of CFD for Grate Type Waste Incinerators." JJ. Korea Society for Computational Fluids Engineering. Vol. 7 No. 3 September : 17-26
  3. Ko, Y.G.(2002), "Numerical Simulation of Waste Bed Combustion and Gas Flow in a Grate-type Waste Incinerator" KSME Syoposium : 1244-1249.
  4. Sung, D.M.(1997), "A Study on the Combustion Characteristics of the Small Grate Type Industrial Wastes Incinerator ." J. KSWM. Vol. 14 No. 6 March : 579-587
  5. Ahmed, S.A and Nejsd, A.S(1992), "Velocity Measurement in a Research combustor Psrt 1 : Isothermal Swirling FLow," Experimental Thermal and Fluid Science, Vol 5 : 162-174 https://doi.org/10.1016/0894-1777(92)90002-M
  6. Drake, M.C.and Blint, R.J.(1991), "Calculations of NOx Formation Pathways in Propagating Laminar, High Pressure Premixed CH4/Air Flames, "Combustion Science and Technology, Vol 75 : 261-285 https://doi.org/10.1080/00102209108924092
  7. Ansys CFX 13.0 Teory Guide & User's Guide.