Smart Structures and Systems

  • 제19권5호
  • /
  • Pages.553-565
  • /
  • 2017
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Structural modeling of actuation of IPMC in dry environment: effect of water content and activity

  • Swarrup, J. Sakthi (Department of Aerospace Engineering, Indian Institute of Science) ;
  • Ranjan, Ganguli (Department of Aerospace Engineering, Indian Institute of Science) ;
  • Giridhar, Madras (Department of Chemical Engineering, Indian Institute of Science)
  • 투고 : 2016.06.19
  • 심사 : 2017.04.15
  • 발행 : 2017.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

Structural modeling of unencapsulated ionic polymer metal composite (u-IPMC) actuators that are used for flapping the insect scale-flapping wing of micro air vehicles (FMAV) in dry environmental conditions is carried out. Structural modeling for optimization of design parameters for retention of water, maximize actuation performance and to study the influence of water activity on the actuation characteristics of u-IPMC is explored for use in FMAV. The influence of equivalent weight of Nafion polymer, cations, concentration of cations, pre-treatment procedures on retention of water of u-IPMCs and on actuation parameters, flapping angle, flexural stiffness and actuation displacement are investigated. IPMC designed with Nafion having equivalent weight 900-1100, pre-heated at $30^{\circ}C$ and with sodium as the cations is promising for optimum retention of water and actuation performance. The actuation parameters while in operation in dry and humid environment with varying water activity can be tuned to desirable frequency, deflection, flap angle and flexural stiffness by changing the water activity and operational temperature of the environment.

키워드

참고문헌

  1. Akle, B.J., Bennett, M.D. and Leo, D.J. (2006), "High-strain ionomeric-ionic liquid electroactive actuators", Sensor Actuat. A - Phys., 126(1), 173-181. https://doi.org/10.1016/j.sna.2005.09.006
  2. Beattie, P.D., Orfino, F.P., Basura, V.I., Zychowska, K., Ding, J., Chuy, C., Schmeisser, J. and Holdcroft, S. (2001), "Ionic conductivity of proton exchange membranes", J. Electroanal. Chem., 503(1), 45-56. https://doi.org/10.1016/S0022-0728(01)00355-2
  3. Bennett, M.D. and Leo, D.J. (2004), "Ionic liquids as stable solvents for ionic polymer transducers", Sensor Actuat. A - Phys., 115(1), 79-90. https://doi.org/10.1016/j.sna.2004.03.043
  4. Bhandari, B., Lee, G.Y. and Ahn, S.H. (2012), "A review on IPMC material as actuators and sensors: fabrications, characteristics and applications", Int. J. Precis. Eng. Man., 13(1), 141-163. https://doi.org/10.1007/s12541-012-0020-8
  5. Bockris, J.O.M. and Reddy, A.K.N. (1998), "Modern Electrochemistry 1: Ionics", v. 1, New York: Plenum Press.
  6. Buechler, M.A. and Leo, D.J. (2007), "Characterization and variational modeling of ionic polymer transducers", J. Vib. Acoust., 129(1), 113-120. https://doi.org/10.1115/1.2424973
  7. Chen, Z., Um, T.I. and Bart-Smith, H. (2011a). "Ionic polymermetal composite enabled robotic manta ray", Proc. SPIE 7976, Electroactive Polymer Actuators and Devices (EAPAD) 2011, 797637.
  8. Chen, Z., Um, T.I. and Bart-Smith, H. (2011b), "A novel fabrication of ionic polymer-metal composite membrane actuator capable of 3-dimensional kinematic motions", Sensor Actuat. A - Phys., 168(1), 131-139. https://doi.org/10.1016/j.sna.2011.02.034
  9. Choi, P. (2004), "Investigation of Thermodynamic and Transport Properties of Proton-Exchange Membranes in Fuel Cell Applications" Doctoral dissertation, WORCESTER POLYTECHNIC INSTITUTE.
  10. Choi, P., Jalani, N.H. and Datta, R. (2005), "Thermodynamics and proton transport in Nafion I. Membrane swelling, sorption, and ion-exchange equilibrium", J. Electrochem. Soc., 152(3), 84-89.
  11. Duan, Q., Ge, S. and Wang, C.Y. (2013), "Water uptake, ionic conductivity and swelling properties of anion-exchange membrane", J. Power Sources., 243, 773-778. https://doi.org/10.1016/j.jpowsour.2013.06.095
  12. Doyle, M., Wang, L., Yang, Z. and Choi, S.K. (2003), "Polymer electrolytes based on ionomeric copolymers of ethylene with fluorosulfonate functionalized monomers", J. Electrochem. Soc., 150(11), 185-193.
  13. Futerko, P. and Hsing, I.M. (1999), "Thermodynamics of water vapor uptake in perfluorosulfonic acid membranes", J. Electrochem. Soc., 146(6), 2049-2053. https://doi.org/10.1149/1.1391890
  14. Freger, V. (2002), "Elastic energy in microscopically phaseseparated swollen polymer networks", Polymer, 43(1), 71-76. https://doi.org/10.1016/S0032-3861(01)00599-7
  15. Gong, Y., Tang, C.Y., Tsui, C.P. and Fan, J. (2009), "Modelling of ionic polymer-metal composites by a multi-field finite element method", Int. J. Mech. Sci., 51(11), 741-751. https://doi.org/10.1016/j.ijmecsci.2009.07.006
  16. Jalani, N.H. and Datta, R. (2005a), "The effect of equivalent weight, temperature, cationic forms, sorbates, and nanoinorganic additives on the sorption behavior of Nafion(R)", J. Membr. Sci., 264(1), 167-175. https://doi.org/10.1016/j.memsci.2005.04.047
  17. Jalani, N.H., Choi, P. and Datta, R. (2005b), "TEOM: A novel technique for investigating sorption in proton-exchange membranes", J. Membr. Sci., 254(1), 31-38. https://doi.org/10.1016/j.memsci.2004.12.020
  18. James, P.J., Elliott, J.A., McMaster, T.J., Newton, J.M., Elliott, A. M.S., Hanna, S. and Miles, M.J. (2000), "Hydration of Nafion(R) studied by AFM and X-ray scattering", J. Mater. Sci., 35(20), 5111-5119. https://doi.org/10.1023/A:1004891917643
  19. Jung, K., Nam, J. and Choi, H. (2003), "Investigations on actuation characteristics of IPMC artificial muscle actuator", Sensor Actuat. A - Phys., 107(2), 183-192. https://doi.org/10.1016/S0924-4247(03)00346-7
  20. Kim, S.J., Lee, I.T., Lee, H.Y. and Kim, Y.H. (2006), "Performance improvement of an ionic polymer-metal composite actuator by parylene thin film coating", Smart Mater. Struct., 15(6), 1540. https://doi.org/10.1088/0964-1726/15/6/005
  21. Kawano, Y., Wang, Y., Palmer, R.A. and Aubuchon, S.R. (2002), "Stress-strain curves of Nafion membranes in acid and salt forms", Polímeros, 12(2), 96-101. https://doi.org/10.1590/S0104-14282002000200008
  22. Lantada, A.D., Morgado, P.L., Mu, J.L., Mu, J.M. and Otero, J.E. (2012), "Neural network approach to modelling the behaviour of ionic polymer-metal composites in dry environments", J. Signal Inform. Process., 3(2), 137-145 https://doi.org/10.4236/jsip.2012.32018
  23. Lee, J.H., Lee, J.H., Nam, J.D., Choi, H., Jung, K., Jeon, J.W., Lee, Y.K., Kim, K.J. and Tak, Y. (2005), "Water uptake and migration effects of electroactive ion-exchange polymer metal composite (IPMC) actuator", Sensor Actuat. A - Phys., 118(1), 98-106. https://doi.org/10.1016/j.sna.2004.07.001
  24. Lee, S.G., Park, H.C., Pandita, S.D. and Yoo, Y. (2006), "Performance improvement of IPMC (ionic polymer metal composites) for a flapping actuator", Int. J. Control Autom., 4(6), 748-755.
  25. Li, H. and Zhao, C. (2013), "Model study of IPMC beam electroactive response based on root deformation", J Wuhan Univ Technol -Mater. Sci. Ed., 28(1), 31-39. https://doi.org/10.1007/s11595-013-0635-3
  26. Lin, Y.C., Yu, C.Y., Li, C.M., Liu, C.H., Chen, J.P., Chu, T.H. and Su, G.D.J. (2014), "An ionic-polymer-metallic composite actuator for reconfigurable antennas in mobile devices", Sensors, 14(1), 834-847. https://doi.org/10.3390/s140100834
  27. Lughmani, W.A., Jho, J.Y., Lee, J.Y. and Rhee, K. (2009), "Modeling of bending behavior of IPMC beams using concentrated ion boundary layer", Int. J. Precis Eng Man., 10(5), 131-139. https://doi.org/10.1007/s12541-009-0104-2
  28. Majsztrik, P., Bocarsly, A. and Benziger, J. (2008), "Water permeation through Nafion membranes: the role of water activity", J. Phys. Chem. B., 112(51), 16280-16289. https://doi.org/10.1021/jp804197x
  29. Majsztrik, P.W. (2008), "Mechanical and Transport Properties of Nafion for PEM Fuel Cells: Temperature and Hydration Effects", Doctoral dissertation, Princeton University.
  30. McGee, J. (2002), "Mechano-electrochemical response of ionic polymer-metal composites", Ph.D Thesis Dissertation, UC San Diego.
  31. Mirfakhrai, T., Madden, J.D. and Baughman, R.H. (2007), "Polymer artificial muscles", Mater. today., 10(4), 30-38.
  32. Morris, D.R. and Sun, X. (1993), "Watersorption and transport properties of Nafion 117 H", J. Appl. Polym. Sci., 50(8), 1445-1452. https://doi.org/10.1002/app.1993.070500816
  33. Mukherjee, S. and Ganguli, R. (2010), "A dragonfly inspired flapping wing actuated by electro active polymers", Smart Struct. Syst., 6(7), 867-887. https://doi.org/10.12989/sss.2010.6.7.867
  34. Nasser, S.N. (2008), "Electrochemomechanics of ionic polymer-metal composites", Springer Handbook of Experimental Solid Mechanics.
  35. Nasser, S.N. and Wu, Y. (2006), "Tailoring the actuation of ionic polymer-metal composites", Smart Mater. Struct., 15(4), 909. https://doi.org/10.1088/0964-1726/15/4/003
  36. Nasser, S.N., Zamani, S., and Tor, Y. (2006), "Effect of solvents on the chemical and physical properties of ionic polymer-metal composites", J. Appl. Phys., 99(10), 104902. https://doi.org/10.1063/1.2194127
  37. Nasser, S.N. and Zamani, S. (2003), "Experimental study of Nafion-and Flemion-based ionic polymer metal composites (IPMCs) with ethylene glycol as solvent", Proc of SPIE., In Smart Structures and Materials, 233-244.
  38. Nasser, S.N. and Thomas, C.W. (2004), "Ionomeric Polymer-Metal Composites" in [Electroactive Polymer (EAP) Actuators as Artificial Muscles: Reality, Potential, and Challenges, 2nd edn] Bar-Cohen Y (ed), SPIE press, Bellingham, Washington, USA 171-230.
  39. Palmre, V., Brandell, D., Maeorg, U., Torop, J., Volobujeva, O., Punning, A., Johanson, U., Kruusmaa, M. and Aabloo, A. (2009), "Nanoporous carbon-based electrodes for high strain ionomeric bending actuators", Smart Mater. Struct., 18(9), 095028. https://doi.org/10.1088/0964-1726/18/9/095028
  40. Paquette, J.W., Kim, K.J., Kim, D. and Yim, W. (2005), "The behavior of ionic polymer-metal composites in a multi-layer configuration", Smart Mater. Struct., 14(5), 881. https://doi.org/10.1088/0964-1726/14/5/024
  41. Punning, A., Kruusmaa, M. and Aabloo, A. (2007), "Surface resistance experiments with IPMC sensors and actuators", Sensor Actuat. A - Phys., 133(1), 200-209. https://doi.org/10.1016/j.sna.2006.03.010
  42. Saher, S., Moon, S., Kim, S.J., Kim, H.J. and Kim, Y.H. (2010), "$O_2$ plasma treatment for ionic polymer metal nano composite (IPMNC) actuator", Sensor Actuat. B - Chem., 147(1), 170-179. https://doi.org/10.1016/j.snb.2010.03.038
  43. Shahinpoor, M. and Kim, K.J. (2001), "Ionic polymer-metal composites: I. Fundamentals", Smart Mater. Struct., 10(4), 819. https://doi.org/10.1088/0964-1726/10/4/327
  44. Swarrup, J.S., Ganguli, R. and Madras, G. (2014), "Modeling the effect of Nanomaterials on the performance of ionic polymer metal nanocomposite actuators", Adv. Sci. Eng. Med., 6(7), 741-748. https://doi.org/10.1166/asem.2014.1568
  45. Thampan, T., Malhotra, S., Tang, H. and Datta, R. (2000), "Modeling of conductive transport in proton-exchange membranes for fuel cells", J. Electrochem. Soc., 147(9), 3242-3250. https://doi.org/10.1149/1.1393890
  46. Tsonos, C., Apekis, L. and Pissis, P. (2000), "Water sorption and dielectric relaxation spectroscopy studies in hydrated Nafion(R) (-SO3K) membranes", J. Mater. Sci., 35(23), 5957-5965. https://doi.org/10.1023/A:1026782509106
  47. Rivin, D., Kendrick, C.E., Gibson, P.W. and Schneider, N.S. (2001), "Solubility and transport behavior of water and alcohols in $Nafion^{TM}$", Polymer, 42(2), 623-635. https://doi.org/10.1016/S0032-3861(00)00350-5
  48. Wu, X., Wang, X., He, G. and Benziger, J. (2011), "Differences in water sorption and proton conductivity between Nafion and SPEEK", J. Polym. Sci., Part B: Polym. Phys., 49(20), 1437-1445. https://doi.org/10.1002/polb.22326
  49. Xie, G., Okada, T. and Arimura, T. (1998), "Fourier Transform Infrared Spectroscopy Study of Fully Hydrated Nation Membranes of Various Cation Forms", Zeitschrift für physikalische Chemie, 205(Part 1), 113-125. https://doi.org/10.1524/zpch.1998.205.Part_1.113
  50. Yeager, H.L., Twardowski, Z. and Clarke, L.M. (1982), "A comparison of perfluorinated carboxylate and sulfonate ion exchange polymers I. diffusion and water sorption", J. Electrochem. Soc., 129(2), 324-327. https://doi.org/10.1149/1.2123820
  51. Zhao, Q., Majsztrik, P. and Benziger, J. (2011), "Diffusion and interfacial transport of water in Nafion", J. Phys. Chem. B., 115(12), 2717-2727. https://doi.org/10.1021/jp1112125

피인용 문헌

  1. Biomimetic Beetle-Inspired Flapping Air Vehicle Actuated by Ionic Polymer-Metal Composite Actuator vol.2018, pp.1754-2103, 2018, https://doi.org/10.1155/2018/3091579