DOI QR코드

DOI QR Code

System identification of the suspension tower of Runyang Bridge based on ambient vibration tests

  • Li, Zhijun (College of Civil Engineering, Nanjing Tech University) ;
  • Feng, Dongming (Weidlinger Transportation Practice, Thornton Tomasetti) ;
  • Feng, Maria Q. (Department of Civil Engineering and Engineering Mechanics, Columbia University) ;
  • Xu, Xiuli (College of Civil Engineering, Nanjing Tech University)
  • 투고 : 2016.10.23
  • 심사 : 2017.01.27
  • 발행 : 2017.05.25

초록

A series of field vibration tests are conducted on the Runyang Suspension Bridge during both the construction and operational stages. The purpose of this study is devoted to the analysis of the dynamic characteristics of the suspension tower. After the tower was erected, an array of accelerometers was deployed to study the evolution of its modal parameters during the construction process. Dynamic tests were first performed under the freestanding tower condition and then under the tower-cable condition after the superstructure was installed. Based on the identified modal parameters, the effect of the pile-soil-structure interaction on dynamic characteristics of the suspension tower is investigated. Moreover, the stiffness of the pile foundation is successfully identified using a probabilistic finite model updating method. Furthermore, challenges of identifying the dynamic properties of the tower from the coupled responses of the tower-cable system are discussed in detail. It's found that compared with the identified results from the freestanding tower, the longitudinal and torsional natural frequencies of the tower in the tower-cable system have changed significantly, while the lateral mode frequencies change slightly. The identified modal results from measurements by the structural health monitoring system further confirmed that the vibrations of the bridge subsystems (i.e., the tower, the suspended deck and the main cable) are strongly coupled with one another.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Abdel-Ghaffar, A. and R. Scanlan (1985), "Ambient vibration studies of Golden Gate Bridge: II. Pier‐Tower Structure", J. Eng. - Mech., 111(4), 483-499. https://doi.org/10.1061/(ASCE)0733-9399(1985)111:4(483)
  2. Beck, J.L. and Katafygiotis, L.S. (1998), "Updating models and their uncertainties. I: Bayesian statistical framework", J. Eng. Mech.- ASCE, 124(4), 455-461. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:4(455)
  3. Beck, J.L. and Yuen, K.V. (2004), "Model selection using response measurements: Bayesian probabilistic approach", J. Eng. Mech.- ASCE, 130(2), 192-203. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:2(192)
  4. Brownjohn, J.M., et al. (2005), "Lessons from monitoring the performance of highway bridges", Struct. Control Health Monit., 12(3-4), 227-244. https://doi.org/10.1002/stc.67
  5. Damgaard, M., et al. (2015), "A probabilistic analysis of the dynamic response of monopile foundations: Soil variability and its consequences", Probabilist. Eng. Mech., 41, 46-59. https://doi.org/10.1016/j.probengmech.2015.05.001
  6. Deng, Y., et al. (2015), "Investigation of fatigue performance of welded details in long-span steel bridges using long-term monitoring strain data", Struct. Control Health Monit., 22(11), 1343-1358. https://doi.org/10.1002/stc.1747
  7. Feng, D. and Feng, M. (2015), "Model updating of railway bridge using in situ dynamic displacement measurement under trainloads", J. Bridge Eng., 04015019.
  8. Feng, D., et al. (2015), "A vision-based sensor for noncontact structural displacement measurement", Sensors, 15(7), 16557. https://doi.org/10.3390/s150716557
  9. Feng, D., et al. (2015), "Simultaneous identification of bridge structural parameters and vehicle loads", Comput. Struct., 157, 76-88. https://doi.org/10.1016/j.compstruc.2015.05.017
  10. Feng, M.Q., et al. (1998), "Identification of a dynamic system using ambient vibration measurements", J. Appl. Mech. - ASCE, 65(4), 1010-1021. https://doi.org/10.1115/1.2791895
  11. Gentile, C. and Gallino, N. (2008), "Condition assessment and dynamic system identification of a historic suspension footbridge", Struct. Control Health Monit., 15(3), 369-388. https://doi.org/10.1002/stc.251
  12. Ko, J.M., et al. (1998), "Modal analysis of suspension bridge deck units in erection stage", Eng. Struct., 20(12), 1102-1112. https://doi.org/10.1016/S0141-0296(97)00207-1
  13. Li, H., et al. (2011), "Investigation of vortex-induced vibration of a suspension bridge with two separated steel box girders based on field measurements", Eng. Struct., 33(6), 1894-1907. https://doi.org/10.1016/j.engstruct.2011.02.017
  14. Li, H., et al. (2006), "Structural health monitoring system for the Shandong Binzhou Yellow River Highway Bridge", Comput. - Aided Civil Infrastruct. Eng., 21(4), 306-317. https://doi.org/10.1111/j.1467-8667.2006.00437.x
  15. Li, Z.L., Li, A. and Zhang, J. (2010), "Effect of boundary conditions on modal parameters of the Run Yang Suspension Bridge", Smart Struct. Syst., 6(8), 905-920. https://doi.org/10.12989/sss.2010.6.8.905
  16. Ni, Y.Q., et al. (2015), "Investigation of mode identifiability of a cable-stayed bridge: comparison from ambient vibration responses and from typhoon-induced dynamic responses", Smart Struct. Syst., 15(2), 447-468. https://doi.org/10.12989/sss.2015.15.2.447
  17. Novak, M. (1974), "Dynamic stiffness and damping of piles", Can. Geotech. J., 11(4), 574-598. https://doi.org/10.1139/t74-059
  18. Novak, M. and Elsharnouby, B. (1983), "Stiffness constants of single piles", J. Geotech. Eng. - ASCE, 109(7), 961-974. https://doi.org/10.1061/(ASCE)0733-9410(1983)109:7(961)
  19. Ren, W., et al. (2004), "Roebling suspension bridge. II: Ambient testing and live-load response", J. Bridge Eng., 9(2), 119-126. https://doi.org/10.1061/(ASCE)1084-0702(2004)9:2(119)
  20. Rice, J.A. et al. (2010), "Flexible smart sensor framework for autonomous structural health monitoring", Smart Struct. Syst., 6(5-6), 423-438. https://doi.org/10.12989/sss.2010.6.5_6.423
  21. Rune, B., et al. (2001), "Modal identification of output-only systems using frequency domain decomposition", Smart Mater. Struct., 10(3), 441. https://doi.org/10.1088/0964-1726/10/3/303
  22. Siringoringo, D.M. and Fujino, Y. (2012), "Observed along-wind vibration of a suspension bridge tower", J. Wind Eng. Ind. Aerod., 103, 107-121. https://doi.org/10.1016/j.jweia.2012.03.007
  23. Sun, H. and Betti, R. (2015), "A hybrid optimization algorithm with bayesian inference for probabilistic model updating", Comput. - Aided Civil Infrastruct. Eng., 30(8), 602-619. https://doi.org/10.1111/mice.12142
  24. Sun, H. and Bueyuekoeztuerk, O. (2016), "Probabilistic updating of building models using incomplete modal data", Mech. Syst. Signal Pr., 75, 27-40. https://doi.org/10.1016/j.ymssp.2015.12.024
  25. Sun, H., et al. (2017), "Bayesian characterization of buildings using seismic interferometry on ambient vibrations", Mech. Syst. Signal Pr., 85, 468-486. https://doi.org/10.1016/j.ymssp.2016.08.038
  26. Ulusoy, H.S. and Feng, M.Q. (2011), Modal parameter identification of civil engineering structures under operational conditions.
  27. Van Overschee, P. and De Moor, B. (2012), Subspace identification for linear systems: Theory-Implementation-Applications, Springer Science & Business Media.
  28. Zhang, J., et al. (2012), "Experimental vibration analysis for structural identification of a long-span suspension bridge", J. Eng. Mech. - ASCE, 139(6), 748-759.

피인용 문헌

  1. Shaking table test and theoretical analysis of the pile-soil-structure interaction at a liquefiable site vol.27, pp.15, 2018, https://doi.org/10.1002/tal.1513
  2. Ambient vibration test and modelling of historical timber mosques after restoration vol.173, pp.12, 2020, https://doi.org/10.1680/jstbu.18.00088
  3. Nondestructive Experimental Measurement, Model Updating, and Fatigue Life Assessment of Çarşamba Suspension Bridge vol.27, pp.2, 2017, https://doi.org/10.1061/(asce)be.1943-5592.0001818