DOI QR코드

DOI QR Code

Application of wavelet transform for the impulse response of pile

  • Ni, Sheng-Huoo (Department of Civil Engineering, National Cheng Kung University) ;
  • Yang, Yu-Zhang (Department of Civil Engineering, National Cheng Kung University) ;
  • Lyu, Chia-Rong (Department of Civil Engineering, National Cheng Kung University)
  • 투고 : 2014.06.10
  • 심사 : 2017.03.22
  • 발행 : 2017.05.25

초록

The purpose of this paper is to study the capabilities of the impulse response method in length and flaw detecting for concrete piles and provide a suggested method to find small-size flaws in piles. In this work, wavelet transform is used to decompose the recorded time domain signal into a series of levels. These levels are narrowband, so the mix of different dominant bandwidths can be avoided. In this study, the impulse response method is used to analyze the signal obtained from the wavelet transform to improve the judgment of the flaw signal so as to detect the flaw location. This study provides a new way of thinking in non-destructive testing detection. The results show that the length of a pile is easy to be detected in the traditional reflection time or frequency domain method. However, the small flaws within pile are difficult to be found using these methods. The proposed approach in this paper is able to greatly improve the results of small-size flaw detection within piles by reducing the effects of any noise and clarifying the signal in the frequency domains.

키워드

과제정보

연구 과제 주관 기관 : Natural Science Council of Republic of China

참고문헌

  1. Addison, P.S. (2002), The Illustrated Wavelet Transform Handbook, Institute of Physics.
  2. Baker Jr., C.N., Drumright, E.E., Mensah, F., Parikh, G. and Ealy, C. (1991), "Use of nondestructive testing to evaluate defects in drilled shafts", Transportation Research Record, 1331, 28-35.
  3. Beheshti-Aval, S.B., Taherinasab, M. and M. Noori, M. (2011), "Using harmonic class loading for damage identification of plates by wavelet transformation approach", Smart Struct. Syst., 8(3), 253-274. https://doi.org/10.12989/sss.2011.8.3.253
  4. Berger, J.A. and Cotton, D.M. (1990), "Low strain integrity testing of deep foundations", Proceedings of the 5th Annual Members' Conference, Seattle.
  5. Briaud, J.L., Ballouz, M. and Nasr, G. (2002), "Defect and length predictions by NDT methods for nine bored piles", International Perspective on Theory, Design, Construction, and Performance, Orlando, Florida, USA.
  6. Fei, K., Liu, H.L. and Zhang, T. (2007), "Three-dimensional effects in low strain integrity test of PCC pile", Rock Soil Mech., 28, 1095-1102.
  7. Finno, R.J. and Gassman, S.L. (1998a), "Evaluation of bridge foundations by impulse response methods", Structural Materials Technology III, San Antonio, Texas, USA.
  8. Finno, R.J. and Gassman, S.L. (1998b), "Impulse response evaluation of drilled shafts", Journal of Geotechnical and Geoenvironmental Engineering, 124 (10), 965-975. https://doi.org/10.1061/(ASCE)1090-0241(1998)124:10(965)
  9. Harrell, A.S. and Stokoe, K.H., II, (1984), Integrity Evaluation of Drilled Piers by Stress Waves, Transportation Research Center, The University of Taxes at Austin.
  10. Hartung, M., Meier, K. and Rodatz, W. (1992), "Integrity testing on model pile", Proceedings of the 4th International Conference on the Application of Stress-Wave Theory to Piles, Netherlands.
  11. Huang, Y.H., Ni, S.H., Lo, K.F. and Charn, J.Y. (2010), "Assessment of identifiable defect size in a drilled shaft using sonic echo method: Numerical simulation", Comput. Geotech., 37(6), 757-765. https://doi.org/10.1016/j.compgeo.2010.06.002
  12. Huang, Y.H. (2011), "Evaluation of the stress wave techniques for the integrity test of pile foundations", Ph. D. Dissertation, Natl. Cheng Kung Univ., Tainan, Taiwan.
  13. Iskander, M., Roy, D., Kelley, S. and Ealy, C. (2003), "Drilled shaft defects: detection, and effects on capacity in varved clay", J. Geotech. Geoenviron. Eng. - ASCE, 129(12), 1128-1137. https://doi.org/10.1061/(ASCE)1090-0241(2003)129:12(1128)
  14. Kim, D.S., Kim, H.W. and Kim, W.C. (2002), "Parametric study on the impact-echo method using mock-up shafts", NDT&E Int., 35(8), 595-608. https://doi.org/10.1016/S0963-8695(02)00046-4
  15. Kim, D.S. and Kim, H.W. (2004), "Evaluation of the base condition of drilled shafts by the impact-echo method", Geotech. Test. J., 27(5), 496-503.
  16. Lin, Y., Sansalone, M. and Carino, N.J. (1991), "Impact-echo response of concrete shafts", Geotech. Test. J., 14 (2), 121-137. https://doi.org/10.1520/GTJ10554J
  17. Malhotra, V.M. (1976), Testing Hardened Concrete: Nondestructive Methods, Iowa State University Press.
  18. Mallat, S. (1999), A wavelet tour of Signal Processing. Academic, San Diego, 2nd edition.
  19. Misiti, M., Misiti, Y., Oppenheim, G. and Poggi, J.M., (Eds.) (2007), Wavelets and Their Applications, ISTE Ltd., DSP series.
  20. Newland, D.E. (1999), "Ridge and phase identification in the frequency analysis of transient signals by harmonic wavelets", J. Vib. Acoust., 121(2), 149-155. https://doi.org/10.1115/1.2893957
  21. Ni, S.H., Huang, Y.H. and Lo, K.F. (2011), "Estimating the flaw size in drilled shafts using an impulse response method", J. Civil Eng. - KSCE, 38(1), 127-132.
  22. Ni, S.H., Isenhower, W.M. and Huang, Y.H. (2012), "CWT technique for low-strain integrity testing of deep drilled shafts", J. Geoeng., 7(3), 97-105.
  23. Park, H.C. and Kim, D.S. (2001), "Evaluation of the dispersive phase and group velocities using harmonic wavelet transform", NDT & E Int., 34(7), 457-467. https://doi.org/10.1016/S0963-8695(00)00076-1
  24. Sarhan, H.A., O'Neill, M.W. and Hassan, K.M. (2002), "Flexural performance of drilled shafts with minor flaws in stiff clay", J. Geotech. Geoenviron. Eng., 128(12), 974-985. https://doi.org/10.1061/(ASCE)1090-0241(2002)128:12(974)
  25. Stain, R.T. (1982), "Integrity testing", Civil Engineering, April, 53-59.

피인용 문헌

  1. Damage Localization of Piles Based on Complex Continuous Wavelet Transform: Numerical Example and Experimental Verification vol.2020, pp.None, 2017, https://doi.org/10.1155/2020/8058640