대한건축학회논문집:구조계 (Journal of the Architectural Institute of Korea Structure & Construction)

  • 제33권5호
  • /
  • Pages.11-20
  • /
  • 2017
  • /
  • 1226-9107(pISSN)
  • /
  • 2384-1788(eISSN)
대한건축학회 (Architectural Institute of Korea)
권호 표지
DOI QR코드

DOI QR Code

OpenSees를 이용한 철근콘크리트 전단벽의 비선형이력해석

Nonlinear Hysteretic Analysis of RC Shear Wall using OpenSees

  • 이상진 (경상대학교 건축공학과) ;
  • 박경임 (경상대학교 대학원 계산역학연구실)
  • 투고 : 2016.11.08
  • 심사 : 2017.05.08
  • 발행 : 2017.05.30
⟨ 이전 논문 다음 논문 ⟩

초록

Reinforced concrete shear wall is analyzed by using Multiple-Vertical-Line-Element (MVLE) which is available in the nonlinear analysis program OpenSees (Open System for Earthquake Engineering Simulation). In this study, a nonlinear hysteretic analysis is mainly conducted to provide a numerical analysis procedure and a verification for the experiment results of eleven shear wall specimens which was coordinated by Land & Housing Institute. Experiment results are revisited and examined with five categorizations and the examined results are described in this manuscript. Chang and Mander's model is adopted to represent the behaviour of both unconfined and confined concrete of the target shear walls. Menegotto and Pinto's model with Filippou's isotropic hardening is adopted to represent the behaviour of steel bars. From numerical results, the nonlinear hysteretic behavior of the shear walls is well predicted with use of the steel and concrete strengths produced by structural material test. However, it is found to be that some modification of the stiffness in the unloading path may be required to produce more realistic hysteretic path closed to the one obtained by experiment. Finally, we provide the present numerical result for the future benchmark test of nonlinear analysis of shear wall structure.

키워드

과제정보

연구 과제 주관 기관 : 경상대학교

참고문헌

  1. Lee, S.J., & Seo, J.M. (2000). A study on the nonlinear finite element analysis of reinforced concrete structure, Korea Atomic Energy Research Institute, Technical Report, (KAERI/TR-1631/2000)
  2. Chun, Y.S., & Park, J.Y. (2016). Seismic performance of special shear wall with modified details in boundary element depending on axial load ratio, LHI Journal, 7:1, pp.31-41.
  3. Chang, G.A., & Mander, J.B. (1994). Seismic Energy Based Fatigue Damage Ananlysis of Bridge Columns: Part 1 - Evaluation of Seismic Capacity, NCEER Technical Report No. NCEER-94-0006, State University of New York, Buffalo, New York.
  4. Filippou, F. C., Popov, E. P., & Bertero, V. V. (1983). Effects of Bond Deterioration on Hysteretic Behavior of Reinforced Concrete Joints. Technical Report EERC-83/19, Earthquake Engrg. Res. Ctr., University of California, Berkeley.
  5. Kabeyasawa, T., Shiohara, H., Otani, S., & Aoyama, H. (1983). Analysis of the full-scale seven story reinforced concrete test structure. Journal of the Faculty of Engineering, The University of Tokyo 37(2): pp.431-478.
  6. Kabeyasawa, T., & Shiohara, H. (1983). Analysis of the Full-Scale Seven-Story Reinforced Concrete Test Structure. Journal of the Faculty of Engineering, University of Tokyo, XXXVII(2), pp.432-478.
  7. Kabeyasawa, T. (1997). Design of RC shear walls in hybrid wall system. Proceedings, Fourth Joint Technical Coordinating Committee, US-Japan Cooperative Seismic Research on Composite and Hybrid Structures. Monterey, California.
  8. Linda P., & Bachmann H. (1994). Dynamic modeling and design of earthquake - resistant walls, J. EESD, 123, pp.1331-1350.
  9. McKenna, F., & Fenves, G. L. (2000). The OpenSees Command Language Primer. PEER, Univ. of California
  10. Mander, J. B., Priestley, M. J. N., & Park, R. (1988). Theoretical stress-strain model for confined concrete. ASCE, Journal of Structural Engineering, 114(8): pp.1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  11. Menegotto, M., & Pinto, P. E. (1973). Method of Analysis for Cyclically Loaded Reinforced Concrete Plane Frames Including Changes in Geometry and NonElastic Behavior of Elements under Combined Normal Force and Bending. In Menegotto, M. and Pinto, P. E., editors, IABSE Symposium on Resistance and Ultimate Deformability of Structures Acted on by Well Defined Repeated Loads, pp.15-22, Lisbon.
  12. Milev, J I. (1996). Two dimensional analytical model of reinforced concrete shear walls. Proc. 11th of WCEE.
  13. Orakcal, K., Wallence, J. W., & Conte, J.P. (2004). Flexural Modeling of Reinforced Concrete Walls - Model Attributes. ACI Structural Journal, pp.688-698.
  14. Vulcano, A., & Bertero, V. V. (1986). Nonlinear analysis of RC structural walls. Proceedings, 8th European Conference on EQ Engineering, 3, Lisbon. Portugal.
  15. Vulcano, A., & Bertero, V. V. (1987). Analytical models for predicting the lateral response of RC shear walls: evaluation of their reliability. EERC Report No. UCB/EERC-87/19, Earthquake Engineering Research Center, University of California. Berkeley, California.
  16. Vulcano, A., Bertero, V. V., & Colotti, V. (1988). Analytical Modeling of RC Structural Walls. Proceedings, 9th World Conference on Earthquake Engineering, V.6, Tokyo-Kyoto, Japan, pp.41-46.