Advances in concrete construction

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Investigation of adding cement kiln dust (CKD) in ordinary and lightweight concrete

  • Shoaei, Parham (Department of Civil Engineering, Sharif University of Technology) ;
  • Zolfaghary, Sina (Department of Civil Engineering, K.N. Toosi University of Technology) ;
  • Jafari, Navid (Department of Civil Engineering, Babol Noshirvani University of Technology) ;
  • Dehestani, Mehdi (Department of Civil Engineering, Babol Noshirvani University of Technology) ;
  • Hejazi, Manouchehr (Department of Civil Engineering, Amirkabir University of Technology)
  • Received : 2017.01.27
  • Accepted : 2017.04.17
  • Published : 2017.04.25
⟨ Previous Next ⟩

Abstract

Cement kiln dust (CKD) is one of the most important waste materials in the cement industry. The large amount of this material, has encouraged researchers to propose new ways to recycle and reuse it. In this paper, effects of adding cement kiln dust to the ordinary Portland cement, on the physical and mechanical properties of ordinary and lightweight concrete were investigated. Results showed that concrete containing CKD, presents lower workability and modulus of elasticity; however, improvements in strength was observed by adding particular amounts of CKD. Eventually, it was found that adding 10% of cement weight CKD is the appropriate percentage for utilizing in manufacturing ordinary and lightweight concrete.

Keywords

References

  1. Abdulabbas, Z.H. (2013), "Utilization of cement kiln dust in concrete manufacturing", Jord. J. Civil Eng., 7(1), 2012-2014.
  2. ACI Committee 211 (1998), Standard Practice for Selecting Proportions for Structural Lightweight Concrete.
  3. ACI Committee 211 (1991), Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete.
  4. Al-Harthy, A.S., Taha, R. and Al-Maamary, F. (2003), "Effect of cement kiln dust (CKD) on mortar and concrete mixtures", Constr. Build. Mater., 17(5), 353-360. https://doi.org/10.1016/S0950-0618(02)00120-4
  5. Anwar Hossain, K.M. (2011), "Stabilized soils incorporating combinations of rice husk ash and cement kiln dust", J. Mater. Civil Eng., 23(9), 1320-1327. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000310
  6. ASTM C127-15 (2015), Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate, ASTM International, Pennsylvania, U.S.A.
  7. ASTM C128-15 (2015), Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate, ASTM International, Pennsylvania, U.S.A.
  8. ASTM C143/C143M-15a (2015), Standard Test Method for Slump of Hydraulic-Cement Concrete, ASTM International, Pennsylvania, U.S.A.
  9. ASTM C192/C192M-16 (2016), Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory, ASTM International, Pennsylvania, U.S.A.
  10. ASTM C293/C293M-16 (2016), Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading), ASTM International, Pennsylvania, U.S.A.
  11. ASTM C330/C330M-14 (2014), Standard Specification for Lightweight Aggregates for Structural Concrete, ASTM International, Pennsylvania, U.S.A.
  12. ASTM C33/C33M-16 (2016), Standard Specification for Concrete Aggregates, ASTM International, Pennsylvania, U.S.A.
  13. ASTM C39/C39M-16 (2016), Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, Pennsylvania, U.S.A.
  14. ASTM C469/C469M-14 (2014), Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression, ASTM International, Pennsylvania, U.S.A.
  15. ASTM C496/C496M-11 (2004), Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, ASTM International, Pennsylvania, U.S.A.
  16. ASTM C78/C78M-16 (2016), Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading), ASTM International, Pennsylvania, U.S.A.
  17. ASTM D2419-02 (2002), Test Method for Sand Equivalent Value of Soils and Fine Aggregate, ASTM International, Pennsylvania, U.S.A.
  18. Baghdadi, Z.A., Fatani, M.N. and Sabban, N.A. (1995), "Soil modification by cement kiln dust", J. Mater. Civil Eng., 7(4), 218-222. https://doi.org/10.1061/(ASCE)0899-1561(1995)7:4(218)
  19. Bassani, M., Riviera, P.P. and Tefa, L. (2016), "Short-term and long-term effects of cement kiln dust stabilization of construction and demolition waste", J. Mater. Civil Eng., 04016286.
  20. Batis, G., Katsiamboulas, A., Meletiou, C.A. and Chaniotakis, E. (1996), "Durability of reinforced concrete made with composite cement containing kiln dust", Concrete Environ. Enhan. Prot., 67-72.
  21. Bhatty, J.I. (1995), Alternative Uses of Cement Kiln Dust, Portland Cement Association.
  22. Bhatty, M.S.Y. (1985), "Kiln dust cement blends, evaluated", Rock Prod., 88(10), 47-52.
  23. Bhatty, M.S.Y. (1985), "Use of cement kiln dust in blended cements-alkali-aggregate reaction expansion", World Cement, 16(10), 386-392.
  24. Bhatty, M.S.Y. (1984), "Use of cement-kiln dust in blended cements", World Cement, 15(4), 126-132.
  25. Daous, M.A. (2004), "Utilization of cement kiln dust and fly ash in cement blends in Saudi Arabia", Eng. Sci., 15(1).
  26. Kim, H.K., Hwang, E.A. and Lee, H.K. (2012), "Impacts of metakaolin on lightweight concrete by type of fine aggregate", Constr. Build. Mater., 36, 719-726. https://doi.org/10.1016/j.conbuildmat.2012.06.020
  27. Maslehuddin, M., Al-Amoudi, O.S.B., Rahman, M.K., Ali, M.R. and Barry, M.S. (2009), "Properties of cement kiln dust concrete", Constr. Build. Mater., 23(6), 2357-2361. https://doi.org/10.1016/j.conbuildmat.2008.11.002
  28. Maslehuddin, M., Al-Amoudi, O.S.B., Shameem, M., Rehman, M.K. and Ibrahim, M. (2008), "Usage of cement kiln dust in cement products-research review and preliminary investigations", Constr. Build. Mater., 22(12), 2369-2375. https://doi.org/10.1016/j.conbuildmat.2007.09.005
  29. Morgan, D.S., Novoa, J.I. and Halff, A.H. (1984), "Oil sludge solidification using cement kiln dust", J. Environ. Eng., 110(5), 935-948. https://doi.org/10.1061/(ASCE)0733-9372(1984)110:5(935)
  30. Najim, K.B., Mahmod, Z.S. and Atea, A.K.M. (2014), "Experimental investigation on using cement kiln dust (CKD) as a cement replacement material in producing modified cement mortar", Constr. Build. Mater., 55, 5-12. https://doi.org/10.1016/j.conbuildmat.2014.01.015
  31. Reynolds, C.E., Steedman, J.C. and Threlfall, A.J. (2007), Reinforced Concrete Designer's Handbook, CRC Press.
  32. Sharma, R. and Bansal, P.P. (2016), "Use of different forms of waste plastic in concrete-a review", J. Clean. Prod., 112, 473-482. https://doi.org/10.1016/j.jclepro.2015.08.042
  33. Siddique, R. (2006), "Utilization of cement kiln dust (CKD) in cement mortar and concrete-an overview", Resour. Conserv. Recycl., 48(4), 315-338. https://doi.org/10.1016/j.resconrec.2006.03.010
  34. Siddique, R. and Rajor, A. (2012), "Use of cement kiln dust in cement concrete and its leachate characteristics", Res. Conserv. Recycl., 61, 59-68. https://doi.org/10.1016/j.resconrec.2012.01.006
  35. Taha, R., Al-Rawas, A., Al-Jabri, K., Al-Harthy, A., Hassan, H. and Al-Oraimi, S. (2004), "An overview of waste materials recycling in the sultanate of oman", Res. Conserv. Recycl., 41(4), 293-306. https://doi.org/10.1016/j.resconrec.2003.10.005
  36. Udoeyo, F.F. and Hyee, A. (2002), "Strengths of cement kiln dust concrete", J. Mater. Civil Eng., 14(6), 524-526. https://doi.org/10.1061/(ASCE)0899-1561(2002)14:6(524)
  37. Wang, M.L. and Ramakrishnan, V. (1990), "Evaluation of blended cement, mortar and concrete made from type III cement and kiln dust", Constr. Build. Mater., 4(2), 78-85. https://doi.org/10.1016/0950-0618(90)90005-L

Cited by

  1. Development of high performance concrete using industrial waste materials and nano-silica vol.9, pp.3, 2020, https://doi.org/10.1016/j.jmrt.2020.04.067
  2. Effects of fiber types and volume fraction on strength of lightweight concrete containing expanded clay vol.12, pp.1, 2017, https://doi.org/10.12989/acc.2021.12.1.047