참고문헌
- F. Blaabjerg, Z. Chen, and S. B. Kjaer, "Power electronics as efficient interface in dispersed power generation systems," IEEE Trans. Power Electron., Vol. 19, No. 5, pp. 1184-1194, Sep. 2004. https://doi.org/10.1109/TPEL.2004.833453
- F. Blaabjerg, R. Teodorescu, M. Liserre, and V. Timbus, "Overview of control and grid synchronization for distributed power generation systems," IEEE Trans. Ind. Electron., Vol. 53, No. 5, pp. 1398-1409, Oct. 2006. https://doi.org/10.1109/TIE.2006.881997
- C. Bailey, H. Lu, and T. Tilford, "Predicting the reliability of power electronic modules," in Proc. ICEPT, pp. 809-813, 2007.
- U. M. Choi, S. Joergensen, and F. Blaabjerg, "Advanced accelerated power cycling test for reliability investigation of power device modules," IEEE Trans. Power Electron., Vol. 31, No. 12, pp. 8371-8386, Dec. 2016. https://doi.org/10.1109/TPEL.2016.2521899
- S. Yang, A. Bryant, P. Mawby, and D. Xiang, "An industry-based survey of reliability in power electronic converters," IEEE Trans. Ind. Appl., Vol. 47, No. 3, pp. 3151-3157, May 2011.
- U. M. Choi, F. Blaabjerg, and K. B. Lee, "Study and handling methods of power IGBT module failures in power electronic converter systems," IEEE Trans. Power Electron., Vol. 30, No. 5,pp. 2517-2533, May 2015. https://doi.org/10.1109/TPEL.2014.2373390
- Power cycling JESD22-A122, JEDEC, Arlington, VA, USA, 2007.
- M. Held, P. Jacob, G. Nicoletti, P. Scacco, and M. Poech, "Fast power cycling test of IGBT modules in traction application," in Proc. International Conference on Power Electronics and Drive Systems, Vol. 1, pp. 425-430, 1997.
- L. R. Gopireddy, M. Tolbert, and B. Ozpineci, "Power cycle testing of power switches: a literature survey," IEEE Trans. Power Electron., Vol. 30, No. 5, pp. 2465-2473, May 2015. https://doi.org/10.1109/TPEL.2014.2359015
- V. Smet, F. Forest, J. J. Huselstein, and F. Richardeau, "Ageing and failure modes of IGBT modules in high-temperature power cycling," IEEE Trans. Ind. Electron.," Vol. 58, No. 10, pp. 4931-4941, Oct. 2011. https://doi.org/10.1109/TIE.2011.2114313
- M. Junghaenel, R. Schmidt, J. Strobel, and U. Scheurmann, "Investigation on isolated failure mechanisms in active power cycle testing," in Proc. Pcim Europe, pp. 251-258, 2015.
- U. Scheuermann and S. Schuler, "Power cycling results for different control strategies," Microelectronics Reliability, Vol. 50, No. 9-11, pp. 1203-1209, Sep. 2010. https://doi.org/10.1016/j.microrel.2010.07.135
- J. Lutz, "Packaging and reliability of power modules," in Proc. CIPS, pp. 1-8, 2014.
- U. Scheuermann and R. Schmidt, "Impact of load pulse duration on power cycling lifetime of Al wire bonds," Microelectronics Reliability, Vol. 53, No. 9-11, pp. 1687-1691, Sep. 2013. https://doi.org/10.1016/j.microrel.2013.06.019
- H. Oh, B. Han, P. Mccluskey, and C. Han, "Physics-offailure, condition monitoring, and prognostics of insulated gate bipolar transistor modules: a review," IEEE Trans. Power Electron., Vol. 30, No. 5, pp. 2413-2426, May 2015. https://doi.org/10.1109/TPEL.2014.2346485
- M. A. Rodriguez, A. Claudio, D. Theilliol, and L. G. Vela, "A new fault detection technique for IGBT based on gate voltage monitoring," in Proc. PESC, pp. 1001-1005, 2007.
- V. Smet, F. Forest, J. J. Huselstein, A. Rashed, and F. Richardeau, "Evaluation of Vce monitoring as a real-time method to estimate aging of bond wire-IGBT modules stressed by power cycling," IEEE Trans. Ind. Electron., Vol. 60, No. 7, pp. 2760-2770, Jul. 2013. https://doi.org/10.1109/TIE.2012.2196894
- M. Tounsi, A. Oukaour, B. Tala-lghil, H. Gualous, B. Boudart, and D. Aissani, "Characterization of high-voltage IGBT module degradations under PWM power cycling test at high ambient temperature," Microelectronics Reliability, Vol. 50, No. 9, pp. 1810-1814, Sep. 2010. https://doi.org/10.1016/j.microrel.2010.07.059
- N. Patil, J. Celeya, D. Das, K. Goebel, and M. Pecht, "Precursor parameter identification for insulated gate bipolar transistor (IGBT) prognostics," IEEE Trans. Rel., Vol. 58, No. 2, pp. 271-276, Jun. 2009. https://doi.org/10.1109/TR.2009.2020134
- G. Coquery and R. Lallemand, "Failure criteria for long term Accelerated Power Cycling Test linked to electrical turn off SOA on IGBT module. A 4000 hours test on 1200A-3300V module with AlSiC base plate," Microelectronics Reliability, Vol. 40, No. 8, pp. 1665-1770, Aug. 2000. https://doi.org/10.1016/S0026-2714(00)00191-8
- L. Dupont and Y. Avenas, "Preliminary evaluation of thermo-sensitive electrical parameters based on the forward voltage for on-line chip temperature measurements of IGBT devices," IEEE Trans. Ind. Appl., Vol. 51, No. 6, pp. 4028-4035, Nov. 2014.
-
W. Lai, M. Chen, L. Ran, O. Alatise, S. Xu, and P. Mawby, "Low
${\Delta}T_j$ stress cycle effect in IGBT power module die-attach lifetime modeling," IEEE Trans. Power Electron., Vol. 31, No. 9, pp. 6575-6585, Sep. 2016. https://doi.org/10.1109/TPEL.2015.2501540 - R. Darveaux, "Effect of simulation methodology on solder joint crack growth correlation," Journal of Electronic Packaging, Vol. 124, No. 3, pp. 1048-1058, May 2002.
- K. Ma, M. Liserre, F. Blaabjerg, and T. Kerekes, "Thermal loading and lifetime estimation for power device considering mission profiles in wind power converter," IEEE Trans. Power Electron., Vol. 30, No. 2, pp. 590-602, Feb. 2015. https://doi.org/10.1109/TPEL.2014.2312335
- X. Du, J. Zhang, G. Li, H. Tai, P. Sun, and L. Zhou, "Lifetime estimation for IGBT modules in wind turbine power converter system considering ambient temperature," Microelectronics Reliability, Vol. 65, pp. 69-78, Oct. 2016. https://doi.org/10.1016/j.microrel.2016.07.141
피인용 문헌
- Remaining Useful Life Estimation of Insulated Gate Biploar Transistors (IGBTs) Based on a Novel Volterra k-Nearest Neighbor Optimally Pruned Extreme Learning Machine (VKOPP) Model Using Degradation Data vol.17, pp.11, 2017, https://doi.org/10.3390/s17112524