Composites Research

  • 제30권2호
  • /
  • Pages.165-168
  • /
  • 2017
  • /
  • 2288-2103(pISSN)
  • /
  • 2288-2111(eISSN)
한국복합재료학회 (The Korean Society for Composite Materials)
권호 표지
DOI QR코드

DOI QR Code

탄소나노튜브 복합재를 이용한 고분자 액추에이터의 냉각 개선

Enhanced Cooling Performance of Polymer Actuators Using Carbon Nanotube Composites

  • Piao, Chengxu (School of Mechanical Engineering, Sungkyunkwan University) ;
  • Suk, Ji Won (School of Mechanical Engineering, Sungkyunkwan University)
  • 투고 : 2016.08.23
  • 심사 : 2017.04.28
  • 발행 : 2017.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

낚싯줄이나 재봉실을 꼬아서 만드는 코일형 고분자 액추에이터는 열을 가하거나 냉각하면 수축하거나 늘어나면서 작동을 하게 된다. 따라서, 코일형 고분자 액추에이터의 동작 속도는 가열 및 냉각 속도에 매우 민감하게 되는 문제가 있다. 코일형 고분자 액추에이터의 동작 속도를 개선하기 위해서, 폴리디메틸실록산 복합재를 액추에이터에코팅하였다. 폴리디메틸실록산에다중벽탄소나노튜브를혼합함으로써, 액추에이터의동작속도를약 13% 개선하였다.

Coiled polymer actuators fabricated by twisting polymer fishing lines or sewing threads respond to heating and cooling with their contraction and relaxation. However, their actuation speed is highly dependent on the heating and cooling rates. In order to improve the actuation speed, the coiled polymer actuator was coated with polydimethylsiloxane composites. The introduction of multi-walled carbon nanotubes into the polydimethylsiloxane improved the actuation speed by about 13%.

키워드

참고문헌

  1. Huang, W., "On the Selection of Shape Memory Alloys for Actuators," Materials & Design, Vol. 23, No. 1, 2002, pp. 11-19. https://doi.org/10.1016/S0261-3069(01)00039-5
  2. Leng, J., Lan, X., Liu, Y., and Du, S., "Shape-Memory Polymers and Their Composites: Stimulus Methods and Applications," Progress in Materials Science, Vol. 56, No. 7, 2011, pp. 1077-1135. https://doi.org/10.1016/j.pmatsci.2011.03.001
  3. Smela, E., "Conjugated Polymer Actuators for Biomedical Applications", Advanced Materials, Vol. 15, No. 6, 2003, pp. 481-494. https://doi.org/10.1002/adma.200390113
  4. Matysek, M., Lotz, P., Flittner, K., and Schlaak, H.F., "High-Precision Characterization of Dielectric Elastomer Stack Actuators and Their Material Parameters", Proceedings of SPIE, Vol. 6927, 2008, pp. 692722.
  5. Haines, C.S., Lima, M.D., Li, N., Spinks, G.M., Foroughi, J., Madden, J.D.W., Kim, S.H., Fang, S., Andrade, M.J., Goktepe, F., Goktepe, O., Mirvakili, S.M., Naficy, S., Lepro, X., Oh, J., Kozlov, M.E., Kim, S.J., Xu, X., Swedlove, B.J., Wallace, G.G., and Baughman, R.H., "Artificial Muscles from Fishing Line and Sewing Thread," Science, Vol. 343, No. 6173, 2014, pp. 868-872. https://doi.org/10.1126/science.1246906
  6. Aliev, A.E., Lima, M.H., Silverman, E.M., and Baughman, R.H., "Thermal Conductivity of Multi-Walled Carbon Nanotube Sheets: Radiation Losses and Quenching of Phonon Modes", Nanotechnology, Vol. 21, No. 3, 2010, pp. 035709. https://doi.org/10.1088/0957-4484/21/3/035709
  7. Pop, E., Varshney, V., and Roy, A.K., "Thermal Properties of Graphene: Fundamentals and Applications", MRS Bulletin, Vol. 37, 2012, pp. 1273-1281. https://doi.org/10.1557/mrs.2012.203

피인용 문헌

  1. 폴리우레탄 기반 복합 섬유의 기계적, 전기적 특성 vol.33, pp.2, 2017, https://doi.org/10.7234/composres.2020.33.2.050
  2. 신축성 접착 필름 위에 놓인 그래핀 종이의 주름 생성 vol.34, pp.2, 2021, https://doi.org/10.7234/composres.2021.34.2.108