References
- Lee, I.C., Lee, T.K., and Jang, D.H., "Development Process of Side Impact Beam for Automotive Light-Weighting Door using Sheet Type," Transactions of Materials Processing, Vol. 24, No. 2, 2015, pp. 130-137. https://doi.org/10.5228/KSTP.2015.24.2.130
- Erzen, S., Ren, Z., and Anzel, I., "Analysis of FRP Side-door Impact Beam," Total Vehicle Technology, Vol. 1, No. 1, 2002, pp. 1-12.
- Lim, T.S., and Lee, D.G., "Mechanically Fastened Composite Side-Door Impact Beams for Passenger Cars Designed for Shear-Out Failure Modes," Composite Structures, Vol. 56, No. 2, 2002, pp. 211-221. https://doi.org/10.1016/S0263-8223(02)00005-3
- Ayhan, A.O., Genel, K., and Eksi, S., "Simulation for Nonlinear Bending Behavior and Geometric Sensitivities for Tubular Beams with Fixed Supports," Thin-Walled Structures, Vol. 51, 2012, pp. 1-9. https://doi.org/10.1016/j.tws.2011.10.016
- Tanabe, H., Miyasaka, A., Yamazaki, K., Iwasaki, T., and Akada, H., "High-Strength Steel Tubes for Automobile Door Impact Beams," Nippon Steel Technical Report, Vol. 64, 1995, pp. 55-61.
- Calonghi, A., Alternative Design of Front Door Side Impact Beam for Nissan Navara, MSc Thesis, Cranfield University, UK, 2006.
- Lee, H.W., Hwang, J.B., Kim, S.U., Kim, W.H., Yoo, S.J., Lim, H.W., and Yum, Y.J., "Construction of Vehicle Door Impact Beam using Hot Stamping Technology," Transactions of the Korean Society of Mechanical Engineers A, Vol. 34, No. 6, 2010, pp. 797-803. https://doi.org/10.3795/KSME-A.2010.34.6.797
- Hui, T.Y.J., Ruan, H.H., and Yu, T.X., "Dynamic Characteristics of Scaled-Down W-Beams under Impact," International Journal of Automotive Technology, Vol. 4, No. 1, 2003, pp. 31-40.
- Djojodihardjo, H., Khai, S.L., and Malaysia, P., "Modeling, Analysis and Comparative Study of Side Impact Beam," International Journal of Engineering and Innovative Technology, Vol. 3, No. 5, 2013, pp. 283-292.
- Warrior, N.A., Wilson, M.J., Brooks, R., and Rudd, C.D., "Modeling of Glass Reinforced Thermoplastic Composite Side-Impact Structures," International Journal of Crashworthiness, Vol. 6, No. 4, 2001, pp. 553-550. https://doi.org/10.1533/cras.2001.0197
- Basavaraju, D.H., Design and Analysis of a Composite Beam for Side Impact Protection of a Sedan, Ph.D Thesis, Wichita State University, US, 2005.
- Kang, D.S., Lee, B.E., Park, E.T., Kim, J., Kang, B.S., and Song, W.J., "Numerical Study for the Improvement of Tapered-hole Clinching Joint Strength of Fiber Metal laminate and Aluminum 5052 using the Taguchi Method," Transactions of Materials Processing, Vol. 24, No. 1, 2015, pp. 37-43. https://doi.org/10.5228/KSTP.2015.24.1.37
- Vlot, A., Kroon, E., and La Rocca, G., "Impact Response of Fiber Metal Laminate," Key Engineering Materials, Vol. 141, 1997, pp. 948-957.
- Lee, B.E., Park, E.T., Ko, D.C., Kang, B.S., and Song, W.J., "Evaluation of Fracture Behavior of Adhesive Layer in Fiber Metal Laminate Using Cohesive Zone Models," Composites Research, Vol. 29, No. 2, 2016, pp. 45-52. https://doi.org/10.7234/composres.2016.29.2.045
- Kil, M.G., Park, E.T., Song, W.J., and Kang, B.S., "Study on Enhancement for Interfacial Energy Release Rate of Adhesive Layer in Fiber Metal Laminate Using Taguchi Method," Composites Research, Vol. 29, No. 5, 2016, pp. 249-255. https://doi.org/10.7234/composres.2016.29.5.249
- Shi, Y., Kim, S.H., Kim, B.S., and Song, J.I., "Impact Behavior of Fiber/Metal Laminates (FMLs) under Low Velocity," Composites Research, Vol. 23, No. 1, 2010, pp. 8-16. https://doi.org/10.7234/KSCM.2010.23.1.008
- US Department of Transportation, National Highway Traffic Safety Administration Laborratory Test Procedure for FMVSS 214S (static) Side Impact Protection, US Department of Transportation, Washington DC, US, 1992.
- Choi, J.K., Kang, M.J., Cho, J.H., and Kim, C.H., "Laser Welding Characteristics of Ultra High Strength Steel for Automotive Application", Journal of Welding and Joining, Vol. 27, No. 5, 2009, pp. 1-4. https://doi.org/10.5781/KWJS.2009.27.5.001
- Lee, B.E., Kang, D.S., Park, E.T., Kim, J., Kang, B.S., and Song, W.J., "Numerical and Experimental Investigation on Impact Performance of Fiber Metal Laminates Based on Thermoplastic Composites", Transactions of Korean Society of Automotive Engineers, Vol. 24, No. 5, 2016, pp. 566-574. https://doi.org/10.7467/KSAE.2016.24.5.566
- Autosteel, AHSS Data Utilization - DP 980, Retrieved from http://www.autosteel.org
Cited by
- 섬유금속적층판 제작을 위한 PTFE 몰드 기반 마이크로파 공정에 대한 실험적 연구 vol.29, pp.4, 2017, https://doi.org/10.5228/kstp.2020.29.4.179
- 열가소성 복합재 적용 자동차 도어 임팩트 빔 개발 vol.33, pp.6, 2020, https://doi.org/10.7234/composres.2020.33.6.383
- Experimental Study on a Microwave Composite Forming Process Based on a SiC Mold for Manufacturing Fiber Metal Laminate vol.14, pp.19, 2017, https://doi.org/10.3390/ma14195547