참고문헌
- J. H. Oh, D. W. Yun, and H. Y. Chang, Power Eng., 21, 1 (2010).
- Y. S. Kim, Corros. Sci. Tech., 9, 20 (2010).
- I. S. Hwang, Industry and Energy, Report on the Corrosion Failure of Water Condenser of Uljin, pp. 15-28, NPP #5, Ministry of Commerce, Korea (2006).
- N. Bailey, Weldability of Ferritic Steels, p. 18, Abington Publishing, Cambridge, England (1995).
- U. Heubner and M. Rockel, Werstoffe und Korrosion, 37, 7 (1986). https://doi.org/10.1002/maco.19860370103
- M. B. Rockel, W. Herda, and U. Brill, Proc. Stainless steels '91 conf., p. 78, Chiba, ISIJ, Japan (1991).
- N. Suutala and M. Kurkela, Proc. Stainless Steels '84 conf., p. 240, The Metals Society, Gothenburg, London (1984).
- H. J. Kim, S. H. Jeon, S. T. Kim, I. S. Lee, and Y. S. Park, Corros. Sci. Tech., 13, 2 (2014).
- KS D 0297, Test method for determination of pitting corrosion resistance for seal weldment between tube and tube sheet (2009).
- ASTM G48, Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution (2003).
- ASME Code Section VIII, Division 2, Article F-3, Special Requirements for Tube-To-Tube sheet Welds (2004).
- ASTM A 262, Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels (2002).
- Y. S. Kim, S. Park, and H. Y. Chang, Met. Mater. Int., 20, 69 (2014). https://doi.org/10.1007/s12540-014-1014-0
- J. Ki. L. Lai, K. H. Lo, and C. H. Shek, Stainless Steels - An Introduction and Their Recent Developments, p. 96, Bentham Science Publishers, Sharjah (2012).
- T. H. Chen, K. L. Weng, and J. R. Yang, Mater. Sci. Eng. A, 338, 259 (2002). https://doi.org/10.1016/S0921-5093(02)00093-X
- J. Dobranszky, P. J. Szabo, T. Berecz, T. Berecz, V. Hrotko, and M. Portko, Spectrochim. Acta B, 59, 1781 (2004). https://doi.org/10.1016/j.sab.2004.07.010
- I. Calliari, M. Zanesco, and E. Ramous, J. Mater. Sci., 41, 7643 (2006). https://doi.org/10.1007/s10853-006-0857-2
- J. Michalska and M. Sozanska, Mater. Charact., 56, 355 (2006). https://doi.org/10.1016/j.matchar.2005.11.003
- C. J. Park, S. H. Kwon, and H. S. Kim, Corros. Sci. Tech., 2, 18 (2003).
- T. Yamane, K. Suzuki, and Y. Minamino, J. Mater. Sci. Lett., 4, 296 (1985). https://doi.org/10.1007/BF00719795
- J. Barcik, Mater. Sci. Technol., 4, 5 (1988). https://doi.org/10.1179/mst.1988.4.1.5
- M. Schwind, J. Kallqvist, J. O. Nilsson, J. Agren, and H. O. Andren, Acta Mater., 48, 2473 (2000). https://doi.org/10.1016/S1359-6454(00)00069-0
- Y. S. Sato and H. Kokawa, Scr. Mater., 40, 659 (1999). https://doi.org/10.1016/S1359-6462(98)00483-7
- U. K. Mudali and B. Raj, High Nitrogen Steels and Stainless Steels-Manufacturing, Properties and Applications, 1st ed., p. 205, Narosa Publishing House, ASM International, New Delhi (2004).
- M. Vilpas and H. Hannien, Mater. Sci. Forum, 318-320, 603 (1999). https://doi.org/10.4028/www.scientific.net/MSF.318-320.603
- S. Hertman and S. Wessman, Mater. Sci. Forum, 318-320, 579 (1999). https://doi.org/10.4028/www.scientific.net/MSF.318-320.579
- T. Ogawa. K. Murata, S. Aoki, and E. Tsunetomi, J. Jap. Weld. Soc., 49, 564 (1980). https://doi.org/10.2207/qjjws1943.49.564
- G. C. Palit, V. Kain, and H. S. Gidayar, Corrosion, 49, 977(1993). https://doi.org/10.5006/1.3316025
- H. Baba, T. Kodama, and Y. Katada, Corros. Sci., 44, 2393 (2002). https://doi.org/10.1016/S0010-938X(02)00040-9
- I. Olefjord and L. Wergrelius, Corros. Sci., 38, 1203 (1996). https://doi.org/10.1016/0010-938X(96)00018-2
- S. Azuma, H. Miyuki, and T. Kudo, ISIJ Int., 36, 793 (1996). https://doi.org/10.2355/isijinternational.36.793
- H. Yashiro, D. Hirayasu, and N. Kumagai, ISIJ Int., 42, 1477 (2002). https://doi.org/10.2355/isijinternational.42.1477
- L. Vehovar, A. Vehovar, M. M. Hukovic, and M. Tandler, Mater. Corros., 53, 316 (2002). https://doi.org/10.1002/1521-4176(200205)53:5<316::AID-MACO316>3.0.CO;2-S
- W. T. Tsai, B. Reynders, M. Stratmann, and H. J. Grabke, Corros. Sci., 34, 1647 (1993). https://doi.org/10.1016/0010-938X(93)90038-I
- C. R. Clayton, L. Rosenzweig, and M. Oversluizen, J. Electrochem. Soc., 133, C303 (1986).
- M. B. Ives, Y. C. Lu, and J. L. Luo, Corros. Sci., 32, 91 (1991). https://doi.org/10.1016/0010-938X(91)90065-W
- R. C. Newman and M. A. A. Ajjawi, Corros. Sci., 26, 1057 (1982).
- H. Baba and Y. Katada, Corros. Sci., 48, 2510 (2006). https://doi.org/10.1016/j.corsci.2005.09.010
- H. Yashiro, D. Hirayasu, and N. Kumagai, ISIJ Int., 42, 1477 (2002). https://doi.org/10.2355/isijinternational.42.1477
- T. Misawa and H. Tanabe, ISIJ Int., 35, 787 (1996).
- J. E. Truman, M. J. Coleman, and K. R. Pirt, Br. Corros. J., 12, 236 (1977). https://doi.org/10.1179/000705977798318973
- S. Song, W. Song, and Z. Fang, Corros. Sci., 31, 395 (1990). https://doi.org/10.1016/0010-938X(90)90137-T
- S. Ningshen, U. K. Mudali, and G. Amarendra, Corros. Sci., 48, 1106 (2006). https://doi.org/10.1016/j.corsci.2005.05.003
- A. S. Lim and A. Atrens, Appl. Phys. A, 51, 411 (1990). https://doi.org/10.1007/BF00348382
- U. K. Mudali, S. Ningshen, and D. K. Dayal, Bull. Electrochem., 15, 74 (1999).
- R. C. Newman and T. Shahrabi, Corros. Sci., 27, 827 (1987). https://doi.org/10.1016/0010-938X(87)90040-0
- A. S. Vanini, J. P. Audouard, and P. Marcus, Corros. Sci., 36, 1825 (1994). https://doi.org/10.1016/0010-938X(94)90021-3
- G. Lothongkum, P. Wongpanya, and S. Morito, Corros. Sci., 48, 137 (2006). https://doi.org/10.1016/j.corsci.2004.11.017
- A. Ahmed and A. Fathy, Ironmak. Steelmak., 59, 3311 (2005).
- H. J. Garbke, ISIJ Int., 36, 777 (1996). https://doi.org/10.2355/isijinternational.36.777
- Y. Lu, R. Bandy, and C. R. Clayton, J. Electrochem. Soc., 130, 1774 (1983). https://doi.org/10.1149/1.2120091
- C. R. Clayton, G. P. Halada, and J. R. Kearns, Mat. Sci. Eng. A, 198, 135 (1995). https://doi.org/10.1016/0921-5093(95)80068-6
- I. Olefjord, B. Brox, and U. Jevelstam, J. Electrochem. Soc., 132, 2854 (1985). https://doi.org/10.1149/1.2113683
- C. O. A. Olsson. Corros. Sci., 37, 467 (1995). https://doi.org/10.1016/0010-938X(94)00148-Y