Carbon letters

  • Volume 22
  • /
  • Pages.101-104
  • /
  • 2017
  • /
  • 1976-4251(pISSN)
  • /
  • 2233-4998(eISSN)
Korean Carbon Society (한국탄소학회)
권호 표지
DOI QR코드

DOI QR Code

Fabrication of carbon fiber SMC composites with vinyl ester resin and effect of carbon fiber content on mechanical properties

  • Lee, Haksung (Korea Institute of Carbon Convergence Technology) ;
  • Huh, Mongyoung (Korea Institute of Carbon Convergence Technology) ;
  • Yoon, Jaeyoung (Korea Institute of Carbon Convergence Technology) ;
  • Lee, Dasom (Korea Institute of Carbon Convergence Technology) ;
  • Kim, Seonyul (Korea Institute of Carbon Convergence Technology) ;
  • Kang, Shinjae (Korea Institute of Carbon Convergence Technology)
  • Received : 2016.11.18
  • Accepted : 2016.12.29
  • Published : 2017.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

Keywords

References

  1. Kim DH, Kim HG, Kim HS. Design optimization and manufacture of hybrid glass/carbon fiber reinforced composite bumper beam for automobile vehicle. Compos Struct, 131, 742 (2015). https://doi.org/10.1016/j.compstruct.2015.06.028.
  2. Davoodi MM, Sapuan SM, Ahmad D, Ali A, Khalina A, Jonoobi M. Mechanical properties of hybrid kenaf/glass reinforced epoxy composite for passenger car bumper beam. Mater Des, 31, 4927 (2010). https://doi.org/10.1016/j.matdes.2010.05.021.
  3. Park JK, Lee JY, Drzal L, Cho D. Flexural properties, interlaminar shear strength and morphology of phenolic matrix composites reinforced with xGnP-coated carbon fibers. Carbon Lett, 17, 33 (2016). https://doi.org/10.5714/CL.2016.17.1.033.
  4. Jin FL, Park SJ. Preparation and characterization of carbon fiberreinforced thermosetting composites: a review. Carbon Lett, 16, 67 (2015). https://doi.org/10.5714/CL.2015.16.2.067.
  5. Wulfsberg J, Herrmann A, Ziegmann G, Lonsdorfer G, Stoss N, Fette M. Combination of carbon fibre sheet moulding compound and prepreg compression moulding in aerospace industry. Procedia Eng, 81, 1601 (2014). https://doi.org/10.1016/j.proeng.2014.10.197.
  6. Boylan S, Castro JM. Effect of reinforcement type and length on physical properties, surface quality, and cycle time for sheet molding compound (SMC) compression molded parts. J Appl Polym Sci, 90, 2557 (2003). https://doi.org/10.1002/app.12726.
  7. Palmer J, Savage L, Ghita OR, Evans KE. Sheet moulding compound (SMC) from carbon fibre recyclate. Compos Part A Appl Sci Manuf, 41, 1232 (2010). https://doi.org/10.1016/j.compositesa.2010.05.005.
  8. Koh SW, Um YS. Tensile fracture behavior of glass fiber/polypropylene composites for various fiber volume fraction. J Korean Soc Fish Technol, 40, 161 (2004). https://doi.org/10.3796/KSFT.2004.40.2.161.
  9. Park JM, Park YG, Lee YH, Seo DK, Lee JH, Kim HD. Properties of randomly oriented chopped E-glass reinforced unsaturated polyester based resin composite: effect of length/content of E-Glass fiber and number of stacking. Text Color Finish, 27, 165 (2015). https://doi.org/10.5764/TCF.2015.27.3.165.
  10. Al-Maamori MH, Abd Alradha RM, Al-Mosawi AI. Mechanical properties for unsaturated polyester reinforcement by glass fiber using ultrasonic technique. Int J Multidiscip Curr Res, 1, 1 (2013).
  11. Lee NJ, Jang J. The effect of fibre content on the mechanical properties of glass fibre mat/polypropylene composites. Compos Part A Appl Sci Manuf, 30, 815 (1999). https://doi.org/10.1016/S1359-835X(98)00185-7.
  12. McConnell VP. New recipes for SMC innovation. Reinf Plast, 52, 34 (2008). https://doi.org/10.1016/S0034-3617(08)70309-6.
  13. American Society for Testing and Materials (D638-14). Standard Test Method for Tensile Properties of Plastics. ASTM International, West Conshohocken, PA, (2014). https://doi.org/10.1520/D0638-14.
  14. American Society for Testing and Materials (D790-15). Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials. ASTM International, West Conshohocken, PA, (2015). https://doi.org/10.1520/D0790-15.